homesellquick 
Nowadays, there are so many products of wrap on pipe heating cable 6 foot in the market and you are wondering to choose a best one. You have searched for wrap on pipe heating cable 6 foot in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings wrap on pipe heating cable 6 foot which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Wrap-On SEPTLS34731006 – Pipe Heating Cables
Product Description
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
From the Manufacturer
Pipe Heating Cable – 31006 6-Foot Ul Pipe Heating Cable
WRAP-ON Pipe Heating Cable – 3-Feet, 120 Volt, Built-in Thermostat, Low Wattage – 31003
- BUILT-IN THERMOSTAT – Turns the cable on at 38 degrees F and prevents frozen pipes to -50 degrees F – Simply wrap on, insulate and plug in. Insulation sold separately.
- PRESS-TO-TEST BUTTON – Exclusive feature to test cable before or after installation.
- ENERGY EFFICIENT – Uses up to 65% less energy at 2 watts per foot vs other cables at 7 watts per foot.
- USE ON ALL RIGID PIPES – PVC, CPVC, copper and metal pipes.
- MADE IN THE USA
Product Description
Prevents frozen water pipes to –50F. Simply wrap on, insulate and plug in. Engineered for use on metal and rigid plastic pipes. Uses an exclusive Press-To-Test button so you can test the cable before installing. A built-in thermostat turns the cable on at 38F. Proven low-wattage design uses up to 65 percent less energy at 2 watts a foot vs. other cables at 7 watts a foot, and protects to –50F. An exclusive power sensor light glows when the thermostat is closed. Each package contains one ready-to-install pipe heating cable along with installation instructions. To install, you will also need PVC/electrical tape, fiberglass pipe insulation, a tape measure and eye protection. Warning: This cable has been designed for the sole purpose of preventing metal and rigid plastic water filled lines from freezing. DO NOT use this product on fuel lines, drain lines, hoses or buried pipes. Fiberglass pipe wrap is required to complete the installation. Read and follow all instructions. Cables are available in various lengths. See chart to determine the length required for your application.
From the Manufacturer
Pipe Heating Cable – 31003 3Ft. Ul Pipe Heating Cable
Similar items with 4 stars and above
HEATIT JHSF 6-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
Similar items with 4 stars and above
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
- Use for water filled plastic (including PEX) or metal pipes. Not use for anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines and so on. Two year limited quality . If you are not completely satisfied with HEATIT heating cable, please don’t hesitate to contact our customer service in any time, we’ll try our best to solve your issues.
- Pre-assembled easy to install. Including grounded plug with light, built in thermostat, and instructions. Easy to install and use. 120 volt, 7 watts/ft. Built in thermostat to turn the cable 37F on 50F off. Only use 5 amps or less of electricity. Energy saving. 100% screen rate with the Aluminum foil and tinned copper braid.
- Both CSA and ETL approved. Industrial grade heat shrinkage tube for connection. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket.
- Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight.
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off.
- Copper
Similar items with 4 stars and above
GardenHOME Pipe and Valve (6Feet) Heat Tape Cables, Black
- SECURED PROTECTION, protects pipes from 6-8 feet (1.83-2.44 m) and up to 1-1 1/2 inches (25.4-38.1 mm) in diameter – 2 Pack
- EASY INSTALLATION, just put our Icebreaker cable along the pipes to keep ice and coldness away (Recommended for use on water-filled metal and rigid plastic pipes). Grounded cord and plug.
- ENERGY SAVING, THERMOSTAT CONTROLLED, the built-in thermostat can sense the temperature of the pipe. It turns the cable on at 38°F and turns it off automatically when the pipe has been heated to a temperature of approximately 45°F.
- ECONOMICAL, reliable low wattage design saves up to 70% energy than other cables and protects your cable to -50°F.
- DURABLE, weather resistant PVC outer jacket and inner insulation. It will operate for years without requiring maintenance.
Description Say goodbye to frozen pipes in the winter with the GardenHome Pipe Heating Cable – 6 ft. (1.83 m). This temperature-controlled cable runs along pipes and valves, thawing frozen pipes. The built-in thermostat will sense the temperature of the pipe and turn the cable on and off to provide the most economical solution for frozen pipe disasters. How it Works Before applying the heating cable, make sure that the area on and around the pipe is clear and that the heating cable is warm and pliable. Simply plug the cable into the nearest grounded electrical receptacle, secure the thermostat tightly against the pipe with electrical tape, secure the heating cable straight along the pipe, and let the heating cable work its magic. The built-in thermostat will automatically detect the temperature of the pipe and turn the cable on when exposed to temperatures below 38F for frost-free pipes all winter long. It will shut the heating cable off when the pipe has been heated to a temperature of approximately 45F, incurring no extra electricity costs.
Similar items with 4 stars and above
Frost King HC12A Heating Cables, 12 Feet, Black
Frost King HC12A Heating Cables, 12 Feet, Black
Similar items with 4 stars and above
Prime Wire & Cable PHC42W06 DE-ICING CABLE WATER PIPE FREEZE PROTECTION
- 6 ft. Black water pipe heating cable, 42 watt
- Stops metal and plastic pipes from freezing down to -40°f/-40°c
- Built-in thermostat automatically turns on at 40°f/4°c
- Materials required (not included) aluminum foil (recommended for plastic pipe)
- fiberglass Plumbing pipe insulation
- fiberglass tape or similar with temperature rating 80 degrees C/175F or higher
Frost King Foil Backed Fiberglass Pipe Wrap, 3"x1"x25′
- The product is manufactured in china
- The product is highly durable and easy to use
- Easy installation and easy handling
- 1-Inch X 3-Inch X 25-Feet Fiberglass Pipe Wrap
- Comes With A Vapor Barrier 1-Inch Thick
- Foil-backed Insulation, Which Cuts Wasteful Heat Loss On Hot Water Pipes
- Helps Keep The Cold Water Pipes From Sweating
- Simple, One-step Installation
Xarex RPH Self Regulating Pipe Freeze Protection Heating Cable 6ft – Pre-Assembled Heat Trace Tape for Water Pipes Ice Prevention Electric Warmer Deicer Heater System Deicing Snow Melt Cables Melter
- ✔️ HEATING CABLE EXPERTS’ PICKS! – Who made this Self-Regulating heating cable? We know that it looks similar with all the products that are sold on Amazon. But it all comes down to who made the cable. Xarex has set a whole new criterion of SR heating cables – researching to manufacturing, we take control of the entire SCM system ourselves for all of our products.
- ✔️ HERE’S HOW TO PICK THE RIGHT LENGTH OF RPH 120V! – Total length of RPH 120V needed is (A) pipe length + (B) additional 1 foot for each valve or spigot. It is assumed 1/2” thick insulation is used with ambient temperature down to 0°F (-18°F). Use at least 1” thick insulation for freeze protection below 0°F (-18°F).
- ✔️ MORE POWERFUL & MORE DURABLE – Trust our quality. Xarex is different from other models as it is not built with a heat shrinkable tube. What does this mean? It means that our product is assembled with an exclusive molding – assuring a width of 0.5’’ to resist flammability and deformation even in the harshest conditions.
- ✔️ 20 YEARS OF EXPERTISE & UL CERTIFIED TECHNOLOGY – Our SR heating cable has been approved officially by the UL. Our product is safe and excellent in performance. We guarantee it will protect your PIPES from freezing for a long time.
- ✔️ SELF-REGULATING CABLE ONLY – E&S TEC is the best manufacturer that has researched and developed self-regulating products. We have exported more than 100 million miles of our heating products worldwide. We provide not only commercial heating cables but also industrial and household use heating cables. Don’t miss out on this chance to purchase our WORLD CLASS HEAT TRACE CABLES!
Year End Sale 20% – 2019 December Only
RPH 120V Complete Kit: This package includes pre-assembled 5RPH Self-regulating Heating Cable, Warning Labels, Installation Manual and Glass Cloth Application Tape. RPH cable is not an inexpensive product but rather a premium model in the self-regulating market with high quality material, which makes it FLEXIBLE and RUGGED at the same time to provide maximum heat transfer and pleasant installation experience. It is also 0.5-inch-wide with carefully extruded jackets to eliminate possible hot spots, and 6W/ft of power output on PIPE at 50 degrees Fahrenheit which increases even more as it gets colder in winter due to conductive core’s PTC self-regulating technology. The cable has especially endured various types of rigorous flammability and waterproof tests by UL, which is the ultimate factor for safety and service life of pipe heating cable. As one of the few direct manufacturers in the world, we are confident that our products will deliver the quality and the satisfaction homeowners will enjoy. This package is a DIY product that homeowners will easily install upon reading the installation manual. Upon proper installation, our 5 years limited warranty will not be necessary as it will last for decades. If you have any troubles with the application or any defects with the cable upon receipt, please contact us. We will take care of your problems right away.
Similar items with 4 stars and above
Conclusion
By our suggestions above, we hope that you can found wrap on pipe heating cable 6 foot for you.Please don’t forget to share your experience by comment in this post. Thank you!
