homesellquick 
Nowadays, there are so many products of resistive heating wire in the market and you are wondering to choose a best one. You have searched for resistive heating wire in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings resistive heating wire which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Framed Staple 6ft – 28GA+(Flat 0.1×0.3) x4+28GA+38GA Resistance Wire,Nichrome 80 Prebuilt Wires for Household Wiring Use with Cotton
uxcell a14092500ux0360 30M AWG24 0.5mm Nichrome Resistance Resistor Wire for Heating Elements
Uxcell a14062000ux0866 2.5mm2 Flexible Heat Resistance High Temp Wire Cable 3 Meter Long
Southwire 64169622 5 Conductor 18/5 Thermostat Wire, 18-Gauge Solid Copper Class 2 Power-Limited Circuit Cable, 50-Feet, Brown
Temperature Rating: -20 to 60 degree Celsius. Outer Color: Brown. Wire Length: 50 ft. Gauge Conductors: 18/5. Cable or Wire Type: Copper. Color: Brown. Amp Rating: 15 amps. Ground Material: Copper. Direct Burial. Flame Retardant. Sunlight and or UV Resistant: Sunlight Resistant. Jacket Material: Copper. Voltage Rating: 150 volts. Stranded or Solid: Solid. Insulation Material: PVC. UL Listed. Ground Wire Gauge: 18 Ga. Conductor Material: Copper. Number of Conductors: 5. Conductor Gauge: 18 Ga. Indoor and Outdoor.
HEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn’t work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment. HEATIT is registered Trademark by zhukeshi(We didn’t authorize other sellers in Amazon.com).
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2″ in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
- ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shrinkage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we’ll try our best to solve your issue
Similar items with 4 stars and above
Frost King HC6A 6 Feet Automatic Electric Heat Cable Kits, Black
Easy Heat AHB-112 Cold Weather Valve and Pipe Heating Cable, 12-Feet
- Manufactured in china
- Easy to use
- Highly durable
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe
- UL listed
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing
- Includes grounded plug, built in thermostat, and instructions
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket
- AHB units are activated and de-activated by an integral energy-saving thermostat
- Approved for rigid plastic and metal pipe
- UL listed
Easy Heat AHB-112 12′ Pipe Heating CableEasy Heat AHB-112 12′ Pipe Heating Cable Features: Tough PVC inner insulation Continuous ground braid Weather resistant PVC outer jacket Energy saving Thermostat is located between cold lead and heating cable 2′ 18/3 cold lead with grounded plug 84 watts 120 volts AC 12′ heated section
TEMCo Nichrome 60 series wire 32 Gauge 100 Ft Resistance AWG ga
- 32 AWG, Average wire diameter: 0.008 in. (0.2032 mm), 10.55 Ohms/ft at 68°F
- ALLOY: Nichrome 60 (60% Ni, 16% Cr, 24% Fe). Rated for temperatures up to 1150°C (2100°F).
- 100% MADE IN THE U.S.A. All TEMCo wire is produced and spooled right here in the U.S.A.
- PERFECTLY TENSIONED. Zero elongation, scratches or other flaws ensure quality wire on every spool.
- ZERO CONTAMINANTS. Clean production environment houses the spooling process. Hands-off computerized spooling eliminates skin salts and oils.
Nichrome 60 has a maximum operating temperature of 1150°C (2100°F). It has good corrosion resistance, good oxidation properties, and very good form stability. The corrosion resistance is good except in sulphur containing atmospheres. It is ideal for lower temperature applications such as: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, polly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, and ceramic support in kilns. Made in the USA.
Similar items with 4 stars and above
Pre made Resistance Heating Wire 3 Different NI80 Coils 30pcs for DIY project
- High Quality: Made by aluminum alloy, stable, high quality and healthy prebuilt wires
- Durable & Easy to Use:1400℃/ 2550°F high melting temperature, 3mm resistance wire kit, easy install and durable
- Well Organized: Coming with 3 metal cases, portable for travel and reusable
- Easy to use:Push down on the label to open
- Squeeze the sides of cover to pop back
- Get this stunning accessories for you now!
Specification:
✔Material: Ni80
✔Internal Diameter: 3mm
✔Quantity in package: 3 types 30Pieces totally.
✔10 x 2Core 26GA*2,wrapped by 38GA, 0.25ohm
✔10 x 3Core 26GA*3, wrapped by 40GA, 0.22ohm
✔10 x 4Core 26GA*4, wrapped by 40GA, 0.21ohm
Above OHMs are for single one.
Note:
1. Keep out of reach of children and pregnant women.
2. Keep away from high temperatures.
3. Do not use the wires if you are under the age of 18.
uxcell 0.3mm 28AWG Heating Resistor Wire Wrapping Nichrome Resistance Wires for Heating Elements 98ft
- Nichrome(Cr20Ni80) heating alloy, high temperature resistant, corrosion resistant , NOT brittle at high temperatures.
- Wire Gauge : AWG28
- Wire Diameter: 0.3mm/0.012inch
- Length: 30m/98ft.
- Resistance : 15.4Ohm/M
- Maximum Operating Temp : 1100C(2012F).
- Material: Nichrome(Cr20Ni80)
- Main Color: Silver Tone.
- Good thermal efficiency, even heating, safe use and long service life.
Description:
Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries. Other common applications include: heating elements (hair dryers, ovens, toasters, kilns), model and high power rocket motor and recovery ejection charge ignition, heat sealers, poly cutters, foam cutters, resistors, rheostats, current-temperature controls, pyrotechnic ignition, lab inoculating loops, release mechanisms, ceramic support in kilns.
Conclusion
By our suggestions above, we hope that you can found resistive heating wire for you.Please don’t forget to share your experience by comment in this post. Thank you!
