homesellquick 
Nowadays, there are so many products of raspberry pi cooling and screen in the market and you are wondering to choose a best one. You have searched for raspberry pi cooling and screen in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings raspberry pi cooling and screen which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
MakerFocus Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
- Installation instructions video: ★https://drive.google.com/file/d/1n6y5fzvX74SwWc_HFvO6YHhfe32-4vgi/view
- ★https://drive.google.com/open?id=1rx11diEefXeZ3Ig40MzuMXO3-9tdFoo3. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!
- Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!)
- Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging.
- With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don’t need to open the cover. This case is easy to install and has good ventilation.
- With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera(Rpi camera purchase link: https://www.amazon.com/dp/B06XYDCN5N).
Raspberry Pi 3 Case Protective Case, Raspberry Pi 3.5 inch Display Case, Enclosure Box with Mini Cooling Fan Heatsink Kit for Raspberry Pi 3B, 3B+,2B,2B+ Compatible with Raspberry Pi 3.5 inch Display
This protective case is designed specifically for the Raspberry Pi 2 Model B/B+ and Raspberry Pi 3 Model B and 3.5inch display;
It provides the best available protection/accessibility for the Raspberry Pi 2 Model B and Raspberry Pi 3 Model B and 3.5 inch display.
This case is easy to install and has good ventilation, it can install the cooling fan when you have not use the display.
There is a GPIO open position with this case, easy to pull up and insert the GPIO pins, don’t need to open the case.
It with a compact design, simple and elegant, transparent environmental protection material.
Package Including:
1 * Raspberry Pi Case
3 * Heat Sink
1 * Mini Cooling Fan with screws
iUniker Raspberry Pi 4 Touchscreen, Raspberry Pi 4 Case with 3.5 inch 60+fps 480×320 Resolution HD Raspberry Pi Touchscreen with Cooling Fan and Case for Raspberry 4 Model B/Pi 4b (Black Case)
- Fastest 3.5 inch Touchscreen with Case and Fan for Raspberry Pi 4 Model B,Super HD 480×320 Resolution, 60+ fps HD Raspberry Pi Monitor
- We add a backlight switch on the PCB board
- We provide a fan socket for cooling your Pi
- Easy to light it up, only follow the instruction,then you will get a super little raspberry pi screen
- Customer Service Support at any time
3.5-inch New Version Raspberry Pi Touchscreen Specification:
– We add a backlight switch on the PCB board
– We provide a fan socket for cooling your Pi
Parameter:
– Size: 3.5 inch
– Resolution: 480×320
– Refresh Rate: ≥60fps
– Use Method: Easy
Description:
This is the First 3.5 inch HD 480×320 Resolution 60+ fps Raspberry Pi 4b Touchscreen, You can use this screen to watch movie,play game; You can also watch this screen even under the sun.
Package Include:
iUniker New Version 3.5-inch Touchscreen x1
Case x1
Cooling Fan x1
Screw Sets x1
Notice:
*Please Read the User Guide Carefully before use.*
*Raspberry Pi is not included*
iUniker New Raspberry Pi Screen, 3.6 inch 60+fps 800×480 Resolution HD with Cooling Fan and Case for Raspberry Pi 3 B+/B, Pi 2 B (with Black Case and Fan)
- Fastest 3.6 inch Screen for Raspberry Pi,Super HD 800×480 Resolution, 60+ fps HD Raspberry Pi Monitor
- We add a backlight switch on the PCB board
- We provide a fan socket for cooling your Pi
- Easy to light it up, only follow the instruction,then you will get a super little raspberry pi screen
- Customer Service Support at any time
3.6-inch New Version Screen Specification:
– We add a backlight switch on the PCB board
– We provide a fan socket for cooling your Pi
Parameter:
– Size: 3.6 inch
– Resolution: 800*480
– Color: 262K
– Refresh Rate: ≥60fps
– Use Method: Easy
Description:
This is the First 3.6 inch HD 800×480 Resolution 60+ fps Raspberry Pi screen, You can use this screen to watch movie,play game; You can also watch this screen even under the sun.
Package Include:
iUniker New Version 3.6-inch Screen x1
Case x1
Cooling Fan x1
Screw Sets x1
Notice:
*Please Read the User Guide Carefully before use.*
*Raspberry Pi is not included*
Argon NEO Raspberry Pi 4 Model B Heatsink Case | Supports Cooling Fan, Camera, and LCD Display | GPIO and PoE Pins are Accessible
- Small formed cooling case that especially keeps the Raspberry Pi 4 safe.
- Supports up to the Raspberry Pi 4 4GB model.
- Provides access to the Camera module, Display Module, GPIO pins, and PoE pins.
- The perfect Raspberry Pi 4 Case that keeps your Pi cool even at maximum performance.
Dorhea Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5” 480×320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero
- 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed
- Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation
- Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc
- Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features
- Note : Raspbery Pi 3 or Raspberry Pi 2 model B was not included,detailed tutorials can be provide for free http://www.lcdwiki.com/3.5inch_RPi_Display
Installing the drivers can refer to the following link or text description
http://www.lcdwiki.com/3.5inch_RPi_Display
Step 1,
install the official Raspbian or UbuntuMate image
Download the latest Raspbian image from the official
https://www.raspberrypi.org/downloads/
Download the latest Ubuntu Mate image from the official
https://ubuntu-mate.org/download/
Format the Micro SD card using SDFormatter,
Use Win32DiskImager to burn the official image to the Micro SD card.
Step 2,
install the LCD driver
Method 1: Online installation (Raspberry Pi needs to connect to the Internet)
Use the Putty connection to log in to the Raspberry Pi system to the user command line (initial username: pi password: raspberry)
Execute the following command (after copying, click the right mouse button in the Putty window to paste):
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-show
Method 2: Offline installation
1. Download from the website or copy the “LCD-show.tar.gz” driver from the CD to the root directory of the Raspberry Pi system card
(Recommended Step 1 After copying, copy the driver directly to the Micro SD card, or use SFTP to copy it remotely)
2. Execute the following command to extract the installation driver:
cd /boot
sudo tar zxvf LCD-show.tar.gz
cd LCD-show/
sudo ./LCD35-show
Suitable for Raspberry Pi B / Raspberry Pi B+ / Raspberry Pi A+ / Raspberry Pi 2 and Pi 3 Model B / Raspberry Pi 3 B+
Package Included:
1 X 3.5”Raspberry Pi LCD Display
1 X Case for Raspberry Pi 2/ 3 Model B / B+
3 X Heatsinks
for Raspberry Pi 4 Case 3.5 inch Touch Screen with Built-in Fan and Cooling Heatsink, 320×480 Pixel TFT LCD Monitor Game Display (Black)
- Optimal Heat Dissipation – With the latest design screen, built-in fan interface, independent fan pins, and ultra-quiet high-speed fan for optimal cooling of your Raspberry Pi and touch screen.
- Wide Range of Applications – The screen supports 125MHz SPI signal input, refresh rate is about 50fps, support for playing video and games, while the picture is stable and clear can be used as a monitor screen, supporting 3.5mm stereo audio output.
- Good Display Effect – 480×320 pixel hardware resolution, resistive touch control, convenient human-computer interaction experience, support software keyboard, DIY anytime, anywhere.
- System Services – We have provided detailed tutorials to solve the problem of installing drivers. If you have any questions, please feel free to contact us.
- Easy to Operate – This case is designed for the Raspberry Pi 4 and 3.5 inch display. The case is made of ABS and is light and convenient.
NOTE:
Drive Installation
Step 1: Install Raspbian Offical driver
a) Go to raspberry pi offical to download latest Raspberry Buster image.
b) Format your Micro SD card by using “”SDFormatter””
c) Burn the image you download into Micro SD card by using “” Win32DiskImager””
Step 2: Connect Raspberry Pi 4 with HDMI screen
a) Connect your pi 4 with PC HDMI screen
b) Make sure your pi is connected to Internet
Step 3: Connect Raspberry Pi 4 with HDMI screen
a) Login to Raspberry Pi and go to the terminal
b) Enter the following command to install LCD driver
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./MHS35-show
Screen:
There is a separate built-in fan interface on the back of the screen, which solves the problem that the fan cannot be used with the screen at the same time. Provide the best heat dissipation effect for the Raspberry Pi. The 3.5 inch screen gives you a good visual experience, the 480×320 resolution provide you an optimal display.
Case:
This protective case is designed specifically for the Raspberry Pi 4 and 3.5 inch display. It provides the best available accessibility for the Raspberry Pi 4 and 3.5 inch display. This case is easy to install and has good ventilation.
Specification:
1.The screen：
Size: 3.5 inch (Portable size compatible with Raspberry Pi 4)
Weight: 53g
LCD Interface: SPI
LCD Type: TFT
Touch Screen Type: Resistive
Resolution: 480*320 DOTS
Frame rate : 50 fps
Package Include:
1x 3.5 inch Touch Screen
1x Mini Fan
1x Touch Pen
3x pcs Heatsink
1x Case for Raspberry Pi 4
Similar items with 4 stars and above
Raspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth (4GB)
- Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1. 5GHz—4GB LPDDR4-2400 SDRAM
- 2. 4 GHz and 5. 0 GHz IEEE 802. 11B/g/n/ac Wireless LAN, Bluetooth 5. 0, double-true Gigabit Ethernet
- 2 × USB 3. 0 ports, 2 x USB 2. 0 Ports—2 × micro HDMI ports supporting up to 4Kp60 video resolution
- 2-lane MIPI DSI/CSI ports for camera and display–4-pole stereo audio and composite video port–Micro SD card slot for loading operating system and data storage
- Requires 5. 1V, 3a power via USB Type C or gpio-poep (power over Ethernet) enabled (requires PoE hat-not included)
Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems. This product’s key features include a high-performance 64-bit quad-core processor, dual-display support at resolutions up to 4K via a pair of micro-HDMI ports, hardware video decode at up to 4Kp60, 4GB of RAM, dual-band 2. 4/5. 0 GHz wireless LAN, Bluetooth 5. 0, Gigabit Ethernet, USB 3. 0, and PoE capability (via a separate PoE HAT add-on). The dual-band wireless LAN and Bluetooth have modular compliance certification, allowing the board to be designed into end products with significantly reduced compliance testing, improving both cost and time to market.
Argon One Raspberry Pi 3 B+ / B Case with Cooling Fan | Aluminum Heatsink | Power Button | Supports Retro Gaming, Movies, and Music
- SLEEK MULTIMEDIA CASE | This sleek aluminum case not only brings out stunning aesthetics, but it’s also highly functional by protecting the Raspberry Pi from harm and being usable for pastimes such as retro gaming, watching movies, or even playing music. This case supports Raspbian, LibreElec, Retropie, Recalbox, and OSMC.
- PASSIVE &
- ACTIVE COOLING | The Argon One itself acts as the Raspberry Pi’s heatsink for passive cooling. A proprietary software controls the fan inside the case for an active and improved temperature management.
- EASY ASSEMBLY &
- NEAT CABLE MANAGEMENT | Assembling the case with the Raspberry Pi is easy. Installing the Argon ONE Script that unlocks the full functionality of the Argon ONE in one line. All of the ports are accessed at the back, making the mini-computer manageable with minimal cable clutter and easy cleaning.
- PROPER SYSTEM SHUTDOWN | A proper power button is installed on the case to prevent file damage. Safe Shutdowns, Reboots, and Forced Shutdowns are built in features.
- MAGNETIC REMOVABLE TOP &
- ACCESS TO GPIO | The PCB Board built into the case provides separate power sources to the fan and power switch, as well as extending the GPIO pins to use the case in multiple projects. A magnetic removable top makes the pins safe when they aren’t in use.
Similar items with 4 stars and above
Raspberry Pi 4 Case with Cooling Fan Acrylic Transparent Case,for 3.5" Screen,Compatible Pi 3 B+, Pi 3 Model B, Pi 2 Model B
- Professional for Raspberry Pi 4 B,and Compatible with Raspberry Pi 4 Model B/ Pi 3 B+/ Pi 3B/ 2B
- Acrylic shell is stronger,Transparent and observable internal operation,Easy to open
- With radiator
- Can install a 3.5 “screen.
- compatible with Pi 3 Model B+ / Pi 3B
Package Include:
1x Pi Case
1x Screw Set
1x Heatsink
Contain(Multiple interfaces): power, RCA Video, Audio, USB, LAN,SD card and Light pipes.
Conclusion
By our suggestions above, we hope that you can found raspberry pi cooling and screen for you.Please don’t forget to share your experience by comment in this post. Thank you!
