Best Rasberry Pie 3 Case With Cooling Fan

(The Same Case Kit for RPI 4, please go to: http://www.amazon.com/dp/B07TTN1M7G)
This is 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 /pi 2 .

Product Feature:
1. All ports are available
Special design is easy to insert/remove SD card, allows Breakout cable, HDMI cable and other ports for RPi access.
2. Better heat dissipation performance
The mute mini cooling fan and aluminum heatsinks have stronger heat radiation while the pi board working.
3. Good quality material
The raspberry pi 3 case with clear acrylic layers is more durable to protect your RPi board!
4. Crystal-like appearance
Clear case is easy to watch the internal state while pi board working to check if all electronic components function normally.

Package Included:
1x Acrylic Case for Raspberry Pi 3 model B+ / 3 / 2
1x Mute Cooling Fan
1x 5V 2.5A Power Supply
3x Aluminum Heat Sinks 14*14*6mm x 2(Large) 9*9*5mm x 1 (small)
4x Metal Screws and Bolts for the case

Related Item:
Miuzei Raspberry Pi 3 B+ Case with Fan (The same case without power supply): http://a.co/1YTEbRO (B07C6CFL2B)
Miuzei Raspberry Pi Camera Module: http://a.co/eBHmA2y (B07BTP8VXL)

Note: Please peel off the protective films on the top and bottom layers before use, the film was tiny and not easily noticeable
Please make sure the layer 3 was installed right, if you installed it 180 degrees backwards, it will make all the difference in the power plug fitting.

(1) Small components inside, please away from young kids below 3yrs.
(2) Kindly to know this case can’t fit for ASUS tinker board.

Any question there, please don’t hesitate to contact us to get support and services via Buyer Message or Q&A

Are you looking for the best starter kit for your Raspberry Pi? This is your first choice, and the kit is perfectly design for model 3B and model 2B,don’t hestitate to have it.

Note
1.The 9 layers case contains different components(with different colors), it need to follow the detailed guide. Before you install this case, we hope that you can read our case installation guide and refer it.
2.Then you need to peel paper off the plastic pieces before you assemble it.

Package Included:
1)9 Layers Case x1
2)USB Cable x1
3)Fan x1
4)16G SD Card x1
5)HDMI Cable x1
6)Card Reader x1
7)Aluminium Heat Sinks x3
8)Power Supply x1

About Smraza:
We are a leading manufacturer of electronic components for Arduino and Raspberry Pi. We have a professional engineering team dedicated to providing tutorials and support to help you get started.
If you have any technical questions, please feel free to contact our support staff via Amazon.

Package Include: 1x 4-Layer Raspberry Pi Case 4x Cooling Fan 4x Raspberry Pi Heatsink Kit 4x Screw Set

Aukru Raspberry Pi Clear Housing Transparent Cover Shell Cooling Fan Cooler Heatsink for Raspberry Pi 3 / 2 model b

Specification:
Housing Case:
Color: transparent
Contents: with screws, a screwdriver and four non-slip mats to fix the Raspberry Pi

Cooler Fan:
DC 5V 0.2A
3 x 3 cm balck with metal screws
Easy to install

Heatsink:
Adhesive paste down heatsink to cool the temperature
3pcs Heatsink Sets: 2x alminum heatsink; 1x copper heatsink

installation steps:
1, please put the pi module tilt,
2, when the hdmi port/micro usb port aligned with the corresponding hole,
3, put the module in the case.

Warning:
The raspberry pi 3 has exactly the same shape as a raspberry pi 2. The heatsinks are on top of the board, one on the CPU, one on the GPU, do not need to put heatsink on the component underneath The card, you may not be able to insert the card into its case

Package include:
1 x Aukru tansparent case
1 x Aukru cooling Fan
1 x 2 Aluminum Heatsink + 1 Copper Heat Sink

Raspberry Pi 2B/3B/3B+ Armor Case, Raspberry Pi Metal Case With Dual Cooling Fan Aluminium Alloy, Built-in Heatsink, Radiation And Rust Protection for RPI 2B/3B/3B+

Description:
1. Used for Raspberry Pi 2B/3B/3B+ Module.
2. The armor shell is made of aluminum alloy with CNC machining manufacturing technology. Its cool and attractive design are appreciated by the manufacturers.
3. Including dual fan and thermal tapes that reduce the temperature for the Raspberry Pi plate.
4. There are four screws to fix the case with Raspberry Pi board.

For dual fan and heatsink:
Design of low energy consumption.
Dual cooling experience, no more overheating problems.
Very quiet cooling fan, you won’t be bother by the noise.
All the fans were tested by our engineer, very nice quality control.
The thermal update tape can guarantee the best thermal driving effect.

For aluminum alloy housing:
87*56*25mm. Perfect size for Raspberry Pi 2B/3B/3B+ Model.
The high quality CNC aluminum alloy housing can protect your Pi safe. Radiation protection and difficult to rust.
Open design can make sure that our CNC casing does not affect the Wifi signal.

Package Including:
1 * Aluminum alloy cooling case with dual fan
4 * Thermal tape
12 * Screws(8 for fans, 4 for case)
1 * Wrench

Conclusion

By our suggestions above, we hope that you can found rasberry pie 3 case with cooling fan for you.Please don’t forget to share your experience by comment in this post. Thank you!