homesellquick 
Nowadays, there are so many products of r30 polyesther water filter in the market and you are wondering to choose a best one. You have searched for r30 polyesther water filter in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings r30 polyesther water filter which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
23,471 Reviews Scanned
Pentek R30-20BB Pleated Polyester Filter Cartridge, 20" x 4-1/2", 30 Microns
- Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
- Nominal filtration rating of 30 microns
- Non-woven polyester media pleated around a polypropylene core for strength
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek R30-20BB pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 30 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 20 x 4-1/2 inches (508 x 114 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Tier1 Replacement for Pentek R30-20BB 30 Micron 20 x 4.5 Pleated Polyester Sediment Water Filter 4 Pack
- QUICK & EASY INSTALLATION: Quick and easy installation into your 20 x 4.5 Inch Big Blue whole house filtration system.
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months , depending on the quality of your water, you keep your water tasting great with the Tier1 R30-20BB Water Filter
- HIGH QUALITY FILTRATION: This Pentair R30-20BB Comparable Tier1 filter reduces sediment, dirt, rust, and particles.
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is comparable to many 30 Micron 20 x 4.5 inch pleated polyester sediment filter. Replace your old Pentek R30-20BB Pleated Polyester filter with a Tier1 R30-20BB
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
(Package Of 6) Pentek R30-BB Pleated Polyester Water Filters (9-3/4" x 4-1/2")
Washable and reusable, the R30-BB (6-Pack) Pentek whole house water filter replacement cartridge is an economical way to ensure the water in your home or business remains virtually free of sediment. A genuine OE part, designed by Pentek to be resistant to both bacteria and chemicals, while capturing the maximum amount of dirt. Order the replacement R30-BB Pentek whole house water filter cartridge you need today!
Tier1 Replacement for Pentek R30-BB 30 Micron 10 x 4.5 Pleated Polyester Sediment Water Filer 4 Pack
- QUICK & EASY INSTALLATION: Quick and easy installation into your 10 x 4.5 Inch Big Blue whole house filtration system.
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months , depending on the quality of your water, you keep your water tasting great with the Tier1 R30-BB.
- HIGH QUALITY FILTRATION: This Pentek R30-BB water filter comparable Tier1 pleated sediment filter reduces sediment, dirt, and particles.
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is comparable to many 30 Micron 10 x 4.5 pleated polyester sediment filter. Replace your old Pentair R30-BB or Pentek Pleated water filter with a Tier1 R30-BB.
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
Pentek R30 Pleated Polyester Filter Cartridge, 9-3/4" x 2-5/8", 30 Microns
- Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
- Nominal filtration rating of 30 microns
- Non-woven polyester media pleated around a polypropylene core for strength
- Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
- Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
This Pentek R30 pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated around a polypropylene core for strength. It has an initial pressure drop of less than 1 pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This pleated polyester filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
| Nominal filtration rating | 30 microns |
| Initial pressure drop at 10 gpm | <1> |
| Temperature range | 40 to 125 degrees F (4.4 to 51.7 degrees C) |
| Maximum dimensions (H x W) | 9-3/4 x 2-5/8 inches (248 x 67 mm) |
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Tier1 Replacement for Pentek R30-BB 30 Micron 10 x 4.5 Pleated Polyester Sediment Water Filer 2 Pack
- QUICK & EASY INSTALLATION: Quick and easy installation into your 10 x 4.5 Inch Big Blue whole house filtration system
- 6 MONTH FILTER LIFE: By replacing your water filter every 6 months , depending on the quality of your water, you keep your water tasting great with the Tier1 R30-BB
- HIGH QUALITY FILTRATION: This Pentek R30-BB water filter comparable Tier1 pleated sediment filter reduces sediment, dirt, and particles
- REPLACEMENT PART FOR MANY PART NUMBERS & MODELS: This filter is comparable to many 30 Micron 10 x 4.5 pleated polyester sediment filter. Replace your old Pentair R30-BB or Pentek Pleated water filter with a Tier1 R30-BB
- 100% TIER1 NO WORRIES GUARANTEE: We stand behind the quality of filtration and overall performance of our Tier1 filters!
ReplacementBrand RB-FXHSC Comparable Filter for the Pentek R30-BB and GE FXHSC Model
The ReplacementBrand RB-FXHSC replacement water filter is comparable to the Pentek-R30-BB, and the GE FXHSC. This 30 micron, 10 x 4.5 inch sediment water filter will reduce free floating impurities including soil, sand, sediment, silt and rust.
FiltersFast Compatible Replacement for Pentek R30 Comp Water Filter – 6 Pack
This is the FiltersFast correct replacement for the Pentek R30. This compatible replacement water filter is manufactured from a durable, reusable polyester designed for a number of residential, commercial, and industrial applications. The long lasting filter media features a 30 micron rating that works to filter out particles and contaminants such as sand, rust, and scale particles. The FiltersFast FF10PS-30 offers a high dirt-holding capacity, 30 micron rating, and pleated media, translates to a product that can help you gain control over the contaminants that degrade your water quality.
(Package Of 2) Pentek R30-BB Pleated Polyester Water Filters (9-3/4" x 4-1/2")
Reduces sand, dirt, silt, rust, and scale particles in residential and commercial water
Nominal filtration rating of 30 microns
Non-woven polyester media pleated around a polypropylene core for strength
Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
Temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C)
Conclusion
By our suggestions above, we hope that you can found r30 polyesther water filter for you.Please don’t forget to share your experience by comment in this post. Thank you!
