Which Is The Best Liquid Cooling Resivor

The Corsair Hydro x series XD5 RGB pump/reservoir Combo is ready to drive the world’s most demanding custom cooling systems. A xylem D5 PWM pump provides powerful flow rate for multi-block loops and is adjustable via PWM to maximize cooling capacity or minimize noise. Ten built in RGB LEDs, controlled adding a Corsair lighting Node Pro or Commander Pro and powerful Corsair iCUE software, provide a vibrant splash of control to customize your lighting, while an included temperature sensor gives you real-time performance data from inside your system, for accurate cooling adjustment. Universally compatible with G1/4 fittings and with both 120mm and 140mm fan mounting brackets included, The XD5 RGB pump/reservoir is the heart of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Thermaltake Pacific DIY LCS PR22-D5 300ml 5-Speed Adjustable D5 Pump/Reservoir Combo 3-Port G 1/4″ Thread Tt LCS Certified POM PMMA CL-W082-PL00BL-A

Thermaltake launches the Pacific PR Series tube reservoir and D5 pump for the ultimate in custom PC water cooling configurations. Featuring exceptional performance and unrivalled reliability, the PR22-D5 is manufactured from high quality POM and PMMA material to provide a crystal clear, high performance, durable solution. By giving users ideal mounting, fitting and flow, the PR22-D5 is the right choice for PC enthusiasts. Make your system a showcase for all to see with the Thermaltake Pacific PR Series.

Key Features:

• Featuring 6mm thick of the pipe wall, which can sustain the maximum pressure up to 99 PSI (Pounds per square inch).
• Heat-Resistant Acrylic Tank: Made of reliable, light weighted POM and PMMA construction, which is crystal clear and highly durable. High quality acrylic (PMMA) tube maximum working temperature: 131°F
• G ¼” Thread Ports

Specification:

• 1mm (L) x 78mm (W) x 309.7mm (H)
• Material: POM + PMMA
• Capacity: 300ml
• Maximum Head: 15 Feet
• Maximum Flow Rate: 1135 L/Hr
• Maximum Pressure: 50 PSI
• Connector: 4 Pin
• Pump Speed: 1800, 2550, 3300, 4050, 4800 RPM
• G ¼”

Support 
Please visit our website or search “Thermaltake Support” for any assistance.

The X4 Photon Reservoir/Pump Combo combines the ultimate tube reservoir with the new XSPC X4 pump. The X4 pump is a compact and high performance pump, designed for PC water-cooling. The pump has a flow rate of 600lph, a powerful head delivery of 3m and a ceramic shaft for longer life and reliability. The X4 offers similar performance to a D5 pump on setting 4, but at a lower noise level and a more affordable price. The Photon’s tube is made from a quality toughened glass, which is both crystal clear and highly resistant to staining. In the center of the tube is an acrylic lighting pole that connects to a 5mm LED on the base of the reservoir. The LED is easily replaceable so you can match the lighting colour to your build. Unlike other tube reservoirs, which use cheap plastic brackets, the XSPC Photon has high quality CNC cut aluminium bracket. The bracket can attach directly to a 120mm or 140mm radiator, making installation easy and as compact as possible. Each reservoir/pump combo is hand assembled and pressure tested before sale to ensure reliability.

Model: 5060175588098

The Glacier R160C is a combo reservoir from Phanteks designed for the DDC pump. The redesigned R160C now comes with a transparent backplate which creates a more spacious look and delivers immersive lighting experiences with the integrated Digital-RGB solution. With its design and universal 120/140mm fan bracket, the R160C offers for an easy installation with multiple mounting options.

Thermaltake Pacific PR22D5 Plus Reservoir and Pump Combo RGB CLW187PL00SWA Components Cooling Fans Modding

LENX 600L/H 19W DC12V CPU Cooling Heat Exchanger Water Pump Tank 186 ml CO2 Cooler

Features :
Power consumption:19W
Rated voltage: DC 12V
Rated current: ——–
Max flow rate: 600L/H (158.5GPH)
Max static head: 5m (16.4FT)
Diameter of inlet: G 1/4″
Diameter of outlet: G 1/4″
Lifespan: More than 50,000hrs
Power supply: DC electric source
Ceramic shaft + ceramic bushing
Speed:——–
The Water Tank Size:length 160 MM, diameter 50MM.

NOTE:

1. Working at rated voltage (DC12V).
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
5. Ceramic bearing, graphite sleeve, very quiet, when using anhydrous idling is forbidden

Package:
1 X Water pump
1 X Water Tank
2 X G 1/4″ TO 5/16″
1 X Water Block
1 X G 1/4″ TO G 1/4″
2 X Stents
6 X Screws

Description:

– Model:SC-300T
– Flow:max 300L/h
– Head:max 1.9 meters
– Power Connector: Small 3P connector
– Voltage:DC12V
– Power: 4W
– Water tank capacity: 150ml
– Noise:23DB
– Dimensions:Length 66mm * wide 56mm * height 86mm (net size, excluding out of faucets, shock absorber)
– Tap Diameter:9.4 mm

Features:

– LED power indicator to indicate power-on state
– Control circuit,the pump is more stable
– Tap out the instructions marked
– Small 3P power connector can be directly plugged into the headboard fan original position
– Support speed testing function
– With rubber shock absorber base,ultra-quiet experience.（Tips:It is good to use the pipe with 8MM inner diameter）

Package included:

– 1pcs ultra-quiet Water pump

EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) is a value-oriented water cooling pump-reservoir combo. It has been designed to be an entry class combo solution that is able to offer great hydraulic performance complemented with RGB LEDs for modern aesthetics. The combo unit comes with a 120mm fan mount holder included.

The core of the unit is the EK-SPC 60 water pump that uses only a 4-pin PWM FAN header for operation. No other additional connector is required! Full PWM support will allow you to set automatic pump speed regulation depending on your temperatures. Full performance on demand or whisper-quiet operation in idle mode! With a maximum head pressure of 2.2m (7.2ft), and maximum flow of 250L/h and a very compact form

The EK-XRES 140 SPC PWM Classic RGB – Plexi (incl. pump) series pump-reservoir combo comes with a pre-installed anti-cyclone insert.

The main body features two G1/4“ threaded ports of which one is an inlet (in the reservoir) and one is an outlet (from the pump). The reservoir tube is made of a quality acrylic material.

Model: 3831109813744

The Corsair Commander Pro grants superior and accurate hardware control with a compact, all-in-one device. It is fully compatible with Corsair link devices and supports up to six fan connectors, two internal USB 2.0 headers, four temperature inputs, and two RGB LED channels. Accurately monitor how your system reacts when you push it to its limits. Manage your fans without pressing knobs or switches through the intuitive Corsair link software. Synchronize your RGB lighting effects with the HD RGB fans, SP RGB fans and individually addressable RGB LED strips to light up your build.

The Corsair Hydro x series XC7 RGB CPU water block combines premium construction, vivid RGB lighting and extreme cooling performance. A precision machined nickel-plated copper cold plate and more 60 high-efficiency micro-cooling fins draw the maximum amount of heat from your CPU, dropping temperatures and letting you push your clock speeds to their maximum. A transparent flow chamber shows off your coolant in all its glory, lit by 16 individually addressable RGB LEDs for 360° of customizable RGB lighting, controlled by adding a Corsair lighting Node Pro or Commander Pro. Powered by Corsair iCUE software to deliver nearly limitless lighting customization and control, the XC7 is ready to become to become the centerpiece of your custom cooling system. Tech Support # 1-888-222-4346 opt #1

Conclusion

By our suggestions above, we hope that you can found liquid cooling resivor for you.Please don’t forget to share your experience by comment in this post. Thank you!