homesellquick 
Nowadays, there are so many products of induction heating crucible in the market and you are wondering to choose a best one. You have searched for induction heating crucible in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings induction heating crucible which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Yosoo 1000W ZVS Low Voltage Induction Heating Board Module Tesla coil 12V-48V Flyback Driver Heater DIY
- This section of induction heating using low-voltage DC power supply 12-48V Maximum current 20A, maximum power 1000W.
- Tested 53V power supply when working properly.
- Because of its moderate power, can be used for small parts DIY players do hardening, annealing and other heat treatment, Also can be used with a graphite crucible melting gold, silver, copper, aluminum and other metals, uniform heating fast, very convenient.
- 24V input with no load current of 3A , 48V input with no load current of 6A
- The higher the voltage, the greater the heating current when the same thing, the effect is better, But at the same time heat is also large, so to eradicate the actual situation to select the input voltage, the general use of the words 24V or 36V power supply is enough.
Note:
1. The kit contains a full set of driving circuit elements and brass
2. Buyers need to bring their own power and cooling unit.
3. The circuit board using double-sided fiberglass board, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, continuous work, please add a fan to blow down from above, to the resonance capacitors and other components cool.
4. The use of switching power supply Please note that due to high power are generally slow start function, which just opened machine output voltage is slowly rising, while it is turned on before the induction heating circuit if the voltage rises to 12V, because start insufficient voltage can not afford to vibration, resulting in two simultaneous conduction mos tube so burned components.
So the first will start switching power supply voltage reaches 12V above and then access the induction heating circuit.
5. The volume of the object being heated inside the heating coil can not exceed 1/5 of the volume (if the heating cylinder, then heating coil diameter less than the diameter of 1/3), or it may be due to overload or burn out the power supply to the circuit.
Although this circuit can tolerate 20-30A input current moment, but do not exceed 15A when safe work, you can easily add an ammeter between the power supply and heating driver board but always monitor the current overload.
This circuit can not only do the induction heating, the copper tube into the high-frequency transformer, is a powerful inverter.
Note:
Make sure to thoroughly cool this while running anywhere near the specified limits (a very high CFM computer fan will help).
You must turn your power supply on first then put the power to the heater or you will burn it up.
Package includes:
1 x ZVS Low Voltage Induction Heating Board 1 x Brass
Zojirushi NP-HCC10XH Induction Heating System Rice Cooker and Warmer, 1 L, Stainless Dark Gray
- Induction rice cooker and warmer. Electrical Rating : 1,230 Watts
- Multi-Menu cooking functions. Dimension: 10 inch W x 14 inch D x 8 inch H. Capacity: Up to 5.5 cups / 1.0 liter
- Automatic keep warm & extended keep warm keeps rice at the perfect serving temperature
- Healthy cooking options: brown rice, GABA brown rice and germinated brown rice. Delay timer (2 settings) , Electrical Rating – 120 volts
- Note-please ensure to measure rice in the cup that comes along with the product only. Troubleshoot-sparks by the plug when plugging or unplugging the power plug from the electrical outlet, this is common in rice cookers and does not indicate malfunction
superior induction heating (IH) technology efficiently provides high heat and prepares flawless rice every time. Multi-Menu cooking functions include settings for white rice (regular, softer or harder), jasmine white rice, mixed rice, sushi rice, porridge, sweet rice, brown rice, GABA brown rice and quick cooking. The clear-coated stainless steel exterior fits any kitchen decor and makes cleanup a snap. The triple heater (bottom, side and lid) generates heat all around for even heating. Includes black thick spherical inner cooking pan, easy-to-read and use orange LCD control panel with clock and timer. 1 year limited warranty on parts and labor.
Zojirushi NP-GBC05XT Induction Heating System Rice Cooker and Warmer, 0.54 L, Stainless Dark Brown
- 700-watt 3-cup rice cooker and warmer with Induction Heating technology. Note – Capacity is measured in the approx. 6 oz. / 180mL rice measuring cup, using raw short grain white rice. Other grains may vary.
- Menu settings include: white/mixed, sushi, porridge, brown, GABA brown, rinse-free and quick cooking. Electrical Rating- 120 volts / 700 watts
- Accessories include rice spatula, spatula holder and rice measuring cups
- Detachable and washable stainless steel inner lid
- Capacity*: Up to 3 cups / 0.54 liter.Capacity is measured in the approx. 6 oz. / 180mL rice measuring cup, using raw short grain white rice. Other grains may vary
- Thick, spherical inner cooking pan
- carrying handle
- detachable cord
- wash by hand. Dimensions (W x D x H) : 9.12 x 11.87 x 7.5 inches
- NOTE: Please ensure to measure rice in the cup that comes along with the product ONLY
The Zojirushi Induction Heating System Rice Cooker & Warmer with superior induction heating (IH) technology efficiently provides high heat and prepares flawless rice every time. 3-cup capacity cooks as little as 1/2 cup of rice and is ideal for singles and smaller families. Easy-to-clean, clear coated stainless steel exterior fits any kitchen decor. Additional heater on lid generates an ideal temperature for precise cooking. Automatic keep warm. Easy-to-read ORANGE colored LCD control panel with Clock and Timer functions. Delay timer (2 settings) provides freshly cooked rice at the programmed time.
Ciglow PCB Induction Heating Module with Crucible Water Pump Pipe Induction Heating Board Module Flyback Driver Heater-2500W 12-48V
- The heating plate is made of PCB grade, with stable performance.
- The power cord is fully covered with copper cover, which can increase the current and calorific value.
- Using large radiator and large power supply, ensures better heat dissipation effect.
- The output terminal uses three M4 copper columns in parallel, which can be connected to other outputs such as high-voltage packet.
- Using 6 IRFP260s and 12 parallel resonant capacitors, high power, high efficiency.Can used for DIY players to do quenching, annealing and other heat treatment for small parts. It can also used with graphite crucible to smelt gold, silver, copper, aluminum and other metals. It can heat evenly and quickly, which is very convenient.
Specification:
Condition: 100% Brand New
Item Type: Induction Heater
Material: Copper
Color: As Pictures Shown
Pump Input Voltage: DC 12V
Input Voltage: 12V-48V, Recommended Above 36V
Power Requirement: ＜12V ≥10A, ＞15V ≥20A
Maximum Power: 2500W
Maximum Current: 50A
Package List:
1 x Induction Heater
1 x Spiral Copper Tube
1 x Water Pump
1 x Crucible
1 x Water Pipe
ZDBT-6 ZVS Low-Voltage High-Frequency Induction Heating Machine with Crucible quenching Melting Furnace
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
All the products are shipped from US warehouse(CA or NJ)!
Specification:
With crucible, with current indication
Short circuit and overload protection
Voltage and current indicator
With automatic and foot switch heating
Built-in pump
Model: ZDBT-6
Voltage: AC 110V，60Hz
Nominal power: 1400W
Maximum power: 1960W
Ultimate power: 2450W
Weight: 8KG
Include:
1 x Induction heating machine
1 x Stainless steel bucket
1 x Foot switch
1 x Crucible
1 x Crucible pliers
Cast Masters USA – 5 Kg Foundry Clay Graphite Crucible Furnace Torch Melting Casting Refining Gold Silver Copper Brass Aluminum
- CAST MASTERS 5KG Foundry Crucible
- Outside Dimensions – 5.0″ Diameter x 5.5″ Length – Inside Dimensions – 4.0″ Diameter x 5.0″ Depth
- Designed for Melting Gold, Silver, Copper, Brass, Aluminum, and more
- Rated to withstand temperatures up to 1499°F – 2900° F (800°C – 1600°C)
- Designed to use with Fuel and Medium/High-Heat Induction Furnaces and Kilns
CAST MASTERS 5 Kg Clay Graphite Foundry Crucible Graphite Foundry Crucibles are made from a combination of graphite and clay, these crucibles are recommended for melting your precious, or non-precious metals and can handle large batches of material. Their thick inner walls can handle direct heat and open flame foundries. They can be used with our propane melting furnaces as well as a standard torch method. Rated to withstand temperatures up to 1499°F – 2900° F (800 C – 1600°C). Outside Dimensions – 5.0″ Diameter x 5.5″ Length – Inside Dimensions – 4.0″ Diameter x 5.0″ Depth
Tansoole Experiment Porcelain Crucible Chemistry Teaching Heating Tools Laboratory Crucible Cover Set
- Burning solid matter.
- Evaporation, concentration or crystallization of the solution (if there is an evaporating dish, the evaporating dish should be selected, of course, it can also be used for evaporation, concentration or crystallization of the solution)
- It can be directly heated, can not be quenches after heating, and removed with a crucible clamp.
- When you are heated, put it on the mud triangle.
- Stir when evaporating, and dry it with waste heat when it is nearly evaporated.
Product Details:
Product Name: Crucible or cover set
Quantity: 1 pcs
Note:
1.Due to the difference between light and display, there may be some slight color difference from the actual product. Please refer to the actual product.
2.The other samples in the picture are for reference only, not as a sales item, please know.
Package include: Crucible
Conclusion
By our suggestions above, we hope that you can found induction heating crucible for you.Please don’t forget to share your experience by comment in this post. Thank you!
