homesellquick 
Nowadays, there are so many products of heating element water heatere in the market and you are wondering to choose a best one. You have searched for heating element water heatere in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings heating element water heatere which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Rheem SP20060 Electric Water Heater Tune-Up Kit
Product description
Rheem SP20060 Electric Water Heater Tune-Up KitRheem SP20060 Electric Water Heater Tune-Up Kit Features: Repair Kit Plumber’s Pack
From the Manufacturer
Repair your water heater rather than replace it with the Rheem PROTECH Electric Water Heater Tune-Up Kit. This OEM quality Electric Water Heater Tune-Up Kit provides a quick and easy way to repair the most common items on an electric water heater. The tune up kit helps prolong the life of your water heater by renewing the key electrical components of your water heater. The kit includes two 4,500-watt, 240-volt water heater High Watt Density 1” screw-in elements with gaskets, one Therm-O-Disk 240-volt lower thermostats and one Therm-O-Disc upper thermostat. This kit is for units that have 1” screw in water heater elements. They will not fit Rheem Marathon or Eclipse water heaters.
Camco 02342/02343 4500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
4500W/240V Screw-In Element 02343
From the Manufacturer
Camco’s 4500W 240V screw-in type high watt density water heater elements can be used in all screw-in replacement situations if the same wattage and voltage are used. High Watt Density water heater elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Camco 02142/02143 1500W 120V Screw-In Water Heater Element – High Watt Density
Product Description
Camco RV 1500 Watt Universal Element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included. 1500w – 120v.
From the Manufacturer
Camco’s 1500W 120V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density elements are the most common and the same type of element provided with most new water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and most water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Rheem SP610160 Element – 4500W CO U F
Product Description
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
From the Manufacturer
The Rheem SP610160 is an element – 240V/4500W copper non-resistored LWD – 1.5-inch screw-in. Watt Density Classification: LWD. Input Voltage (V): 240. Wattage at 240V (W): 4500. Watt Density at 240V (W/sq. in. ): 98. Cold Resistance (ohms): 12.8. Outer Sheath Material: Copper. Resistored: No. Configuration: Foldback. Element Diameter (in.): .316. Element Length – Flange to Tip (in.): 13.38. Mounting Type: Threaded. Actual Thread Size – Outside Diameter (in.): 1-1/2. Nominal Thread Size – (in.): 1-1/2. Threads per Inch: 12. Thread Type Series Designation: UNF. Hex Head Size – Across Flats (in.): 1-7/8.
Camco 02282/02283 3500W 240V Screw-In Water Heater Element – High Watt Density
Product Description
3500W/240V Screw-In Element 02283
From the Manufacturer
Camco’s 3500W 240V screw-in type high watt density water heater elements can be used in all replacement situations if the same wattage and voltage are used. High Watt Density are the most common and the same type of element provided with most water heaters. They are easy to install and come with detailed instructions on how to replace your old element. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Heating Element Kit (2 Elements – 4500W, 240V and 3500W, 208V)
Non-incoloy element coils are copper on the inside with a nickel plating on the outside. The threaded bases on all of these elements are made of zinc-plated carbon steel.
Camco 02583 4500W 240V Screw-In Foldback Water Heater Element – Low Watt Density
Product Description
02583 Wattage: 4500 Features: -Screw-In Element.-Element comes with one gasket.-Carded.-8″ Minimum tank diameter.-150+ Watts per square inch. Specifications: -1500W Voltage: 120.-2000W Voltage: 240. Dimensions: -Dimensions: 14.5″H x 3.63″W x 1.75″ D.
From the Manufacturer
Camco’s 4500W 240V screw-in type low watt density water heater elements are better suited for areas with problem water (hard water, lime, etc.) Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. Screw-in type elements fit most models of American, AO Smith, Bradford White, Craftmaster (prior to 1991), GE, GS Wood (certain models), Kenmore, Lochinvar, Maytag, Mor-Flo, Reliance, Rheem, Richmond, Rudd, Sears, State, Whirlpool and all water heaters manufactured after 1994. The replacement element must be the same voltage and wattage as the element being replaced. Never exceed the nameplate rating on the water heater.
Rheem SP10869MM Screw-In 240-volt by 4500-watt Element, Premium Resistored Stainless Steel
- Element – 240V/4500W stainless steel resistored lwd – 1 in screw-in
- Watt density classification: lwd, input Voltage (V): 208, Input voltage (V): 240, wattage at 208V (W): 3380
- Element diameter (in.): .316, Element length – Flange to tip (in.): 13.44, mounting Type: threaded, ACTUAL thread size – Outside diameter.): 1-9/32
- Thread type series designation: NPSM, configuration: fold back, nominal thread size – (in.): 1, threads per inch: 11-1/2
Product Description
Rheem SP10869MM water heater 1 inch 4500W element resistored screw-in LWD 240V stainless steel
From the Manufacturer
Rheem is a leading provider of gas furnaces, heat pumps, air conditioners, air handlers, indoor air quality products, gas and electric water heaters.
Dernord 240V 5500W Immersion Ripple Foldback Brewing Water Tubular Heater Element with 1 Inch NPSM Thread White
- Low Watt Density Stainless Steel Immersion Ripple Foldback heating element
- Provides 5500w 240v of power
- The shape is to minimize length and maximize heated surfaces
- Easy to Install and fits most Water Heater Models of American
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
5500W Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 240v 5500w Immersion Ripple Foldback Brewing Water Tubular Heater Element has a compact, energy efficient design that is well suited for many applications. The type of element is to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Item Weight: 16.9ounces
Origin: China
Color: White
Tube length: 333mm
Tube diameter: 8mm
Item Package Quantity: 1
Mounting Type: Threaded
Conclusion
By our suggestions above, we hope that you can found heating element water heatere for you.Please don’t forget to share your experience by comment in this post. Thank you!
