Which Is The Best Gpu Liquid Cooling Block

Description:
This all-in-one liquid CPU cooler kit provides a 240mm heat sink, water pump, cylindrical water reservoir, dual fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Specifications:
1. 240mm black heat sink (with screw pack):
Appearance size: 27.5 * 11.8 * 3.2cm
Straight mouth height: 2cm
Diameter of straight tube: about 9.5 mm
Number of waterways: 18
2. LED fan:
Appearance size: 12 * 12cm
Power supply interface: large 4Pin + small 3Pin
3. Universal CPU block (with 4 pcs screws):
Description: Universal for INTEL / AMD Dual Platform (For INTEL 775,1150,1155,1156,1366,) (For AMD: AM2, AM3, AM3 +)
Note: Do not support for AMD4CPU CPU block, bracket supports for AMD INTEL mainstream hole installation.
Screw size: G1 / 4
Outside diameter: 12.9MM
Bottom contact size: 5 * 5cm, thickness 3mm
Material: Bottom: copper; Cover: transparent plexiglass

Pacakage List:
1 x 240mm Heat Sink within Screw Pack
2 x LED Fan
1 x Universal CPU Block within 4 Screws
1 x Universal GPU Block within 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
1 x Transparent Hose
1 x Water Pump with Shock Pad
1 x A Set of Water Pipe Connectors & Hose Clamps & Plugs

The EK-FC Radeon VII water block with nickel plated cooling plate and acetal top directly cools the GPU, memory and VRM as liquid is channeled directly over these critical areas. These newly developed water blocks feature a redesigned cooling engine that has a larger footprint compared to the previous generation of EK Full Cover water blocks. This results in a larger surface area for heat transfer which increases the thermal performance.

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speeds and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios.

The base of the block is made of nickel-plated electrolytic copper while the top is made of high-quality acrylic. Sealing is ensured by high-quality EPDM O-Rings. The front corner piece is lit up with LED strip.

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

G1/4″ threaded fittings can be used on both sides of the FC terminal.

Enclosed:
– EK-FC Radeon VII series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

Fittings are just for show and are not included!
This product should NOT be installed with any aluminum Fluid Gaming parts!
Radeon VII stock backplates are compatible with EK-Vector Radeon VII water blocks only if installed with the stock backplate screws.

Model: 3831109816165

Description:
This all-in-one liquid CPU cooler kit provides 240mm heat sink, GPU block, CPU block, 6 red rigid tubes, water pump, cylindrical water reservoir, dual LED fans, as well as installation accessories, which will dramatically improve heat dissipation experience, especially in terms of stability, silence, efficiency, and convenience. Liquid cooling simply works better than air cooling and the special design makes it easy for you to protect your valuable CPU.

Note: The CPU block and the GPU block are universal type, suitable for INTEL / AMD Dual Platform.  

Specifications:
Package weight: 2613g

Package List:
1 x 240mm Heat Sink with Screw Pack
2 x LED Fan
1 x CPU Block with 4 Screws
1 x GPU Block with 4 Screws
1 x Cylindrical Water Reservoir (Including 1 * screw pack, 2 * plastic bracket, 2 * metal bracket)
6 x Red Rigid Tube
1 x Water Pump with Shock Pad
8 x Two-Touch Fitting
1 x Water Feeder
1 x Water Plug
1 x Nipple Connector
1 x Vent Plug

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free.
Tips:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2.2pcs G1/4 3/8″ ID 1/2″ OD Silver Compression Fittings are included, instead of the ones in the pictures.
3. Prohibit the use of alcohol containing coolant.
4. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
Compatibilities:Gigabyte RTX 2070 Winforce 2X 8G
Compatibilities:Gigabyte RTX 2060 Super Gaming OC 3X 8G
Compatibilities:Gigabyte RTX 2060 Super Winforce OC 8G
Compatibilities:Gigabyte RTX 2060 Super Winforce 8G

Thermaltake Pacific C360 DDC soft tube Water cooling kit is designed for users who likes an efficient and high-quality Combo kit that is ready to sync with 5V RGB Capable motherboards from Asus, Gigabyte, MSI and as rock. The kit includes three pure 12 a RGB sync radiator fans, a Pacific W4 a RGB CPU water block, Pacific pr15-ddc pump/reservoir Combo, Pacific C360 radiator, a bottle of T1000 transparent coolant pure Clear, six Pacific 1/2” Id x 3/4” Od compressions, two meters of V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) OD transparent tube, an a RGB LED controller, and other accessories. dimension: 520 (L) x 200 (W) x 232 (h)compatibility: intel LGA 2066/2011/1366/1156/1155/1151/1150/775amd AM4/FM2/FM1/AM3+/AM3/AM2+/am2(cpu socket)components Dimension: pump & reservoir: 86. 54 (L) x 62 (W) x 140. 1 (H) mm copper radiator: 29. 5 (H) x 119 (W) x 399 (l) mm tube Dimension: od: 16mm, ID: 12mmfan spec: pwm 5001500 RPM, ( a RGB Controller or 5V MB a RGB sync )coolant: T1000 coolant pure clear kit contents: cpu water block – Pacific W4 a RGB CPU water block x1pump/reservoir- Pacific pr15-ddc pump/reservoir Combo x1copper radiator- Pacific C360 radiator 29. 5 (H) x 119 (W) x 399 (l) mm x1argb fan- pure 12 a RGB sync radiator fan TT Premium Edition x3- a RGB LED controller fittings – Pacific 1/2” Id x 3/4” Od compression – Black x6- Pacific G1/4 90 degree adapter – Black x2coolant- Thermaltake T1000 coolant pure Clear x1 tube- V-Tumbler 4T 1/2’‘(12. 7mm) ID x 3/4’‘(19mm) transparent tube x2 meters accessory- Intel and AMD universal Back Plated & mounting kit- 24pin ATX bridge tool x1- Thermaltake thermal grease x1

The EK-Vector Strix RTX 2080 Ti RGB water block is specially designed for the ROG Strix version of NVIDIA® GeForce® RTX 2080 Ti graphics cards.

The water block covers the entire PCB length, and directly cools the GPU, VRAM and the VRM. The redesigned cooling engine has a larger footprint compared to the previous generation for better cooling performance

The EK® Vector Series water blocks use an Open Split-Flow cooling engine design. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used with reversed flow. 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. Sealing is ensured by high-quality EPDM O-rings.

The block is equipped with 4 12V RGB LED strips which are compatible with the motherboard 4-pin 12V RGB LED header. This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.

Both the NVIDIA® and ROG NVLink™ are compatible with this water block. 

ENCLOSED:

• EK-Vector Strix series high-performance water block
• Mounting mechanism with screw-in brass standoffs
• Necessary mounting screws, nuts, and washers
• 2x Nickel plated brass plug G1/4”
• 6mm Allen key
• Thermal pads
• Thermal grease EK-TIM Ectotherm (1g)

PLEASE NOTE:

ROG Strix RTX 2080Ti factory backplate is not compatible with this water block
Fittings are just for showcase and are not included
Should not be installed with any aluminum EKWB Fluid Gaming parts

Model: 3831109814123

The Corsair Hydro x series XC9 RGB CPU water block combines premium construction, vivid RGB lighting, and extreme cooling performance. A precision machined nickel-plated copper cold plate and more than 70 high-efficiency micro-cooling fins draws the maximum amount of heat from your CPU, dropping temperatures and letting you push your clock speeds to their maximum. Premium sandblasted aluminum trim and a transparent flow chamber match any high-end system build and show off your coolant in all its glory, lit by 16 individually addressable RGB LEDs for 360° of customizable RGB lighting, controlled by adding a Corsair lighting Node Pro or Commander Pro. Powered by Corsair iCUE software to deliver nearly limitless lighting customization and control, the XC9 is ready to become to become the centerpiece of your custom cooling system. Technical support # 1-888-222-4346 opt #1

The EK Vector Series water blocks use an Open Split-Flow cooling engine design which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, which means that it can be used with weaker water pumps, or pumps running on low-speed settings and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performances even when used in reversed water flow scenarios. 

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. 

EK also encloses a single-slot I/O bracket which replaces the original two-slot in order to make installation of multiple graphics cards easier and also transforms the GPU into a gorgeous single slot solution.

G1/4″ threaded fittings can be used on both sides of the terminal and for multiple GPU connectivity, please refer to our offer of EK-Scalar GPU Terminals. The EK-Quantum Vector RX GPU water block terminal cover is not compatible with FC Terminal X and FC Terminal (Legacy) multi GPU connectivity bridges.

Enclosed:
– EK-FC Radeon RX 5700 +XT series water block
– Mounting mechanism with screw-in brass standoffs
– Necessary mounting screws, nuts, and washers
– 2x EK plug G1/4”
– 6mm Allen key
– Thermal pads
– Thermal grease EK-TIM Ectotherm (1g)

Compatibilities:

Sapphire Radeon RX 5700 XT Nitro+

NOTE: If your graphic card model number is not included in the compatible list. DON’T purchase it as your thought.
People purchase items by mistake will pay for the return postage fee.
Please feel free to contact us if you are not sure about it, just let us know and don’t worry. We will confirm it for you. Thanks.

Features:
1. Block with 0.5mm micro channel injection design, all designed only for performance!
2. Block using large flow design, even if low raise pump can use it.
3. Block made by high purity copper, and electroplating to prevent oxidation and makes beautiful.
4. Inlet and outlet can change direction free, easy to build watercooling system.

Please Pay Attention:
1. Please double check the graphics card detail model to ensure compatibility. Please feel free to contact us if you are not very sure.
2. For you convenience, 2pcs G1/4 SILVER nikel plated copper Compression Fittings for 14mm OD hard/rigid tubings are included.
3. The pictures are for reference only, we can only guarantee the performance and compatibility of the products, the factory can change product design at any time for the improvement of the product.
4. Prohibit the use of alcohol containing coolant.
5. Graphics card block installation requires a certain skill and experience, because the graphics card manufacturing tolerances may have a certain impact on the block installation, we can assist buyers to solve such problems, but this can not be the basis of returns.
6. The parcel comes with the thermal pads. But sorry that the paste and battery are forbidden to ship by freight. So the thermal paste for the GPU and the battery CR2025 for the remote control need you to purchase them separately. They are very cheap and won’t cost you much money. Thanks for your understanding.

Features:
This is a universal Water Cooling Block for GPU. Red copper at the bottom, top cover is transparent Acrylic, and the buckle holder is made of stainless steel. Copper base is precisely cut, the gap between each cut copper is about 0.5mm laterally and vertically. 25 water channels. High performance copper base, processed with anti-oxidization technology. Perfectly fit the GPU, carry away more heat from GPU quickly.
Specifications:
Color: Shown as the pictures
Material: Red Copper + Acrylic + Stainless Steel
Base Size: Approx. 40 * 40 * 3 mm / 15.7 * 15.7 * 1.2 inch
Thread Spec: G1/4
Outer Diameter: 12.9mm
Compatible GPU: Fan Hole Size is 43*43mm, 48*48mm, or 53*53mm.
Package Weight: About 137g

Package Included:
1 x GPU Water Cooling Block
4 x Screws
(Not including other things.)

Conclusion

By our suggestions above, we hope that you can found gpu liquid cooling block for you.Please don’t forget to share your experience by comment in this post. Thank you!