homesellquick 
Nowadays, there are so many products of copper valve 3 way refrigerator in the market and you are wondering to choose a best one. You have searched for copper valve 3 way refrigerator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings copper valve 3 way refrigerator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Refrigerator Adjustable Line Tap Valve for Piercing & Servicing 1/4" 5/16" 3/8" QTM-1
Brand New Genuine Mac Made Product. Identified As A Refrigerator Line Tap Valve Kit. Comes In A Kit With Everything You Need. Comes New In Packaging.
Supco BPV31 Bullet Piercing Valve
Product Description
The only valve with a permanent type, patented gasket application Creates a permanent, leak-proof seal that will withstand any pressure and temperature for the life of the unit Furnished with adapter sleeves for multiple use application Hex key included No tools required 1/4″ male flare outlet.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Supco BPV31 Bullet Piercing Valve
Frizzlife Brass Feed Water Adapter – 3/8 inch,3/8 inch Comp and 1/4 inch OD Compression Angle Stop Valve Adapter for Reverse Osmosis Water Filters, Coffee Brewers,Ice Maker
- ALL BRASS MATERIAL
- Fits 3/8″ OD angle valve(9/16-24UNEF)
- TEE UNION ADAPTER: 3/8″ Thread male(Diamater 14.28mm) x 3/8″ thread female(Inner diameter 12.96mm) x 1/4″ tube(Plastic Tubing only) quick connect with compression.
- ROUGH BRASS CONSTRUCTION: Full copper material to prevent leakage
- INSTALLS IN SECOND: extremely easy to load and unload.
- APPLICATIONS: Adapt to most home kitchen feed water supply to Water filters, Reverse Osmosis water system, etc. Fits for angle stop valve BrassCraft, EZ-Fluid, PROCURU, SharkBite
- LEAD FREE PRODUCT
SharkBite 24983A Service Tee Stop Valve, 1/2 inch x 1/2 inch x 1/4 inch, Quarter Turn, Compression Service Stop Fitting, Water Valve Shut Off, Push-to-Connect, PEX, Copper, CPVC, PE-RT
- INSTALLS IN SECONDS: 1/2″ x 1/2” x 1/4″ threaded compression tee shut off valve requires no special tools, no soldering, no crimping or glue. Just push to create a watertight seal
- PERFORMANCE: Rated to 200 psi and 200 Degree F. Use in Potable water and Hydronic Heating applications
- COPPER, PEX, CPVC, PE-RT: SharkBite hose connector inlet fits Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven with more than 550 million connections. SharkBite is the only push-to-connect brand that can ensure a clean, leak-free connection
- RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
CUT. PUSH. DONE.
The SharkBite Connection System makes any plumbing project fast and easy with our unique push-to-connect technology. When you insert a pipe into the SharkBite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal.
We use high quality DZR Lead Free Brass for our 1/2” x 1/2” x 1/4” 1/4 Turn Tee Stop Valve. Chrome plated valve for an attractive appearance. This SharkBite Tee Stop allows you to easily and effortlessly tap into a current or new plumbing line and run a 1/4” compression line out to an end fixture. Makes it easy to add a humidifier, dishwasher, ice maker, faucet installation or toilet installation to a new or existing line. Alternatively, can be used as a saddle valve.
Our product works with your existing plumbing, is easy to disassemble for changing fittings, and can be rotated for easier installation in tight spaces. SharkBite push connect fittings are the no fuss way to fix small leaks or plumb a whole house. Whether you need to repair a broken pipe or plumb a whole house, SharkBite fittings are the push-to-connect solution for leak-free results.
SHARKBITE
SharkBite is a provider of plumbing and water control systems for domestic, commercial and industrial applications. As the world leader and hallmark of push-to-connect plumbing solutions, our goal is to continue innovating the plumbing trade with new solutions that improve efficiency and performance. Trusted by plumbing professionals, SharkBite manufactures a wide range of plumbing fittings, water control valves and PEX pipe, making it the only total plumbing solution from meter to fixture.
LASCO 17-0995 1/4-Inch Compression by 1/4-Inch Compression Brass Ball Valve
Product Description
LASCO Plumbing Specialties 17-0995 is a 1/4-Inch Compression by 1/4-Inch Compression Brass Ball Valve. Brass ball valve. Lead free brass construction. Lead free approved product in all states. Lever handle. 1/4-Inch compression by 1/4-Inch compression.
From the Manufacturer
LASCO Plumbing Specialties 17-0995 is a 1/4-Inch Compression by 1/4-Inch Compression Brass Ball Valve. Brass ball valve. Lead free brass construction. Lead free approved product in all states. Lever handle. 1/4-Inch compression by 1/4-Inch compression.
2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only
- Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use
- The hose adopts quality rubber material, good pressure resistance and reliable
- R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion
- It fits only those cans with the thread of 1/2 inch
- BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes
- Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total
- Easy to use: you only need a hex key wrench (included) to install this part
- Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant
You will get:
3 Pieces charging hose with gauge kit includes 2 x BPV-31 bullet piercing tap valve and 1 x R134a charging hose with gauge
BPV-31 bullet piercing tap valve:
Good quality and easy to install.
The sealing area of the valve is 50 times that of the o-ring. In addition, its sealing force is 180 inch lbs, pressure test at 250 ℉, and torque tested with 500 lbs.
Corrosion resistant.
Replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31. Compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
Material: metal
Quantity: 2 packs
Color: sliver
R12 R22 charging hose with gauge：
R-134a can be connected to the R-12 / R-22 service port for easy conversion
Built-in safety valve to prevent accidental venting of refrigerant
90 Degree push and lock coupler with auto shut off.
Easy and convenient to use. Gauge has three scale readings of R134, R12 and R22 for your convenience
Fits only those cans with the threat of 1/2 inch. If you wan to to use it to R134a can male thread (7/16 inch), you need one adjusted connector.
Can be applied for home air-conditioning and car air-conditioning to add refrigeration.
Material: copper and rubber
Quantity: 1 piece
Package includes:
2 x BPV-31 bullet piercing tap valve kit
1 x R12 R22 charging hose with gauge
Warm notice:
It is not compatible with refrigerant R134A. Put on your safety glasses and protective gloves before piercing the pipe.
This is not the original product, the mention of brand names and any related model designation above is only for purposes of demonstrating compatibility.
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections.
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go.
- LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole.
- HIGH QUALITY AND SAFE PEX AND COPPER. The PEX tubing is extremely reliable and long lasting. It is NSF 14, NSF 61 and ASME A112.18.6 certified. The copper saddle valve is sturdy, durable, and long lasting. Great for both contractors and DIYers. Includes clear instructions to complete your set up quickly.
- LIMITED LIFETIME WARRANTY. For use with 3/8” to 3/4″ copper pipe. 1/4 inch outer diameter outlet saddle valve. 25 feet of PEX tubing and 1/4” x 1/4” compression fitting. Limited lifetime warranty. Choice Hose and Tubing part number 509 5110K.
Get your appliances set up quickly and easily with this ice maker, humidifier, water filter and evaporative cooler installation kit. Poly tubing is durable and reliable, and will not ruin the fresh taste of your water. This complete installation kit includes everything necessary for installation, plus step-by-step instructions to make D-I-Y installation a breeze. Best of all, there’s no need to shut off your water supply during installation. Limited lifetime warranty. Make it yours today!
Woder 10K-JG-1/4 Ultra High Capacity Inline Water Filter – 3 Years or 10K Gals – USA Made – with 1/4" Built-in (Welded) JG Fittings – Fits All Unbraided ¼” PVC or 1/8” PEX
- Watch Installation Video – INLINE WATER FILTER (not under sink water filter) with JG-1/4” connections (DOES NOT COME WITH HOSES AS IT CONNECTS TO EXISTING 1/4″ WATER SUPPLY LINE) – Fits All 1/4″ Plastic Flex Tubing and Flexible Copper Tubing used for water supply to ice makers and refrigerators, etc. 1/4” JG also fits the 1/8″ PEX TUBING as its O.D. is the same as 1/4” Tube. DOES NOT FIT BRAIDED HOSES.
- PURE AND HEALTHY WATER – WITH NO MORE BOTTLES IN THE FRIDGE – Eliminates Lead, Heavy metals, Chlorine, Mercury, PFCs, TMHs, VOCs, Glyphosate, Chromium 6, Trihalomethanes, Detergent, Turbidity, Unpleasant odors and tastes, so you and your family enjoy pure, healthy, spring-fresh water from the tap.
- LASTS FOR A MINIMUM OF 3 YEARS OR 10,000 GALLONS – Notes: For longest life, use with municipal treated cold water only, not well water. Do not use with salty or softened water. Connects for use only with cold water for drinking.
- ADVANCED SELECTIVE FILTRATION TECHNOLOGY – removes 99.9% of contaminants while it leaves in essential minerals. (Reverse osmosis filters out everything, including the minerals your body needs. As far as nutrition goes, experts consider it essentially dead water).
- ENJOY TAP WATER AS PURE AND HEALTHY AS SPRING WATER – Woder filters are tested by independent laboratories to ANSI standards (American National Standards Institute), so you can have complete confidence in the quality of Woder-filtered water. Flow rate 3GPM @65 psig
Conclusion
By our suggestions above, we hope that you can found copper valve 3 way refrigerator for you.Please don’t forget to share your experience by comment in this post. Thank you!
