homesellquick 
Nowadays, there are so many products of brass misting nozzles for outdoor cooling system cleanable in the market and you are wondering to choose a best one. You have searched for brass misting nozzles for outdoor cooling system cleanable in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings brass misting nozzles for outdoor cooling system cleanable which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Metalwork 10 Pcs Nickel Plated Brass & Ceram Misting Nozzle for Outdoor Cooling Misting System, High Pressure Anti Drip Cleanable, 3/16” Thread, Three Stages (0.3mm)
- Advantages: better abrasion resistance, longer service life, removable, cleanable and replaceable.
- Application：Widely used in textile shop humidification, landscaping, cooling, air humidification, spraying disinfection, quarantine, deodorant air purification, etc.
- Usage: Soaking the misting nozzle in cleaner periodically to remove mineral deposits, thus can prolong its lifetime.
- The aperture is between 0.1mm-0.8mm
- Working Temperature: Above 0 ℃.
Specifications:
Color: Silver
Material: Nickel Plated Brass & Ceram
Thread size: 0.1mm-0.8mm
Operation Pressure: 20-70kg
Aootech Brass Misting Nozzles for Outdoor Cooling System 22 pcs,0.012" Orifice (0.3 mm) 10/24 UNC
- High Cost Performance:20pcs+2pcs(Extra Bonus)=22pcs.
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Screw Into Any 10/24-Threaded Mist Nozzle Opening.
- Operation Pressure:20-70kg/Cm. Flow Rate:80-145ml/Min.
- Minimal Water Use Of 1/2 Gallon Of Water Per Hour Per Nozzle.
Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012” Orifice (0.3 mm) 10/24 UNC
- 32PCS Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.
- High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water.
- Screw Into Any 10/24-Threaded Mist Nozzle Opening.
- Operation Pressure:4-70kg/Cm (60-995 psi) Flow Rate:80-145l/Min (21-38GPM).
- Minimal Water Use Of 1/2 GPH Per Nozzle.
Sywon 40 Pack Brass Misting Nozzles Replacement Heads for Garden Patio Lawn Landscaping Dust Control and Outdoor Cooling Mister System, 10/24 UNC
- HIGH EFFICIENCY: Operation Pressure:20-70kg/cm. Flow Rate:80-145ml/min
- DURABLE MATERIAL: Made of brass with good quality
- Rust-free and durable. High cost performance: 38pcs+2pcs (Extra Spare) =40pcs
- 0.012” DIA. ORIFICE: The orifice of these misting nozzles is 0.012 inch/0.3 mm in diameter, which fits for low pressure mister system
- EASY TO INSTALL: Easily screw into any 10/ 24 UNC threaded mist nozzle opening
- WIDE USAGE: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc.
NewAir Outdoor Misting Fan Oscillating All Steel Construction Pedestal Fan with Five Gentle Mist Nozzles, AF-600
- Adjustable height & tilt for optimized air flow
- Bronzed fan blades & attractive design. Connects to standard garden hose for mist that lowers temperatures to 10 degrees in dry locales
- Lightweight & slim silhouette can fit almost anywhere on your patio
- Oscillating fan to circulate air & mist evenly
- Three speed selections to customize air distribution
Stay cool on hot, sunny days with the NewAir AF-600 18-Inch outdoor misting fan. Designed for outdoor use, this portable misting system makes a smart and convenient addition to your patio or deck. The large fan head provides a stream of cool air, and the integrated misting action keeps you and your guests comfortable through countless barbecues, pool parties and outdoor gatherings. Air flow capacity 2800 cfm
AmMist 23pcs/pack Mister Nozzle Stainless Steel Fog Nozzles 0.30mm (0.012inch) Orifice 10/24 unc Thread For Garden, Humidification, Outdoor Cooling, Dust Control, Landscaping
- ★【 MULTI-USAGE 】: humidification, outdoor cooling, landscaping, greenhouse, etc.
- ★【 DURABILITY 】: Complete 303 Stainless Steel Nozzle / Raw materials are purchased from Japan with high purity.
- ★【 STABLE QUALITY 】: Taking a 100% inspection of all the nozzles before shipment
- ★【 RELIABILITY 】: The factory focuses in nozzle engineering and manufacturing for more than 30 years.
- ★【 PERFORMANCE 】: Operation Pressure: 100~1,000psi (6.9bar~70bar) / Flow Rate: 35~113ml/min
※ FEATURES:
1. Uni-body stainless steel design offers the best durability.
2. The nozzle creates fine mist with lower cost comparing to the humidifier.
3. It’s with standard 10/24 unc thread and equipped viton o-ring.
4. The nozzle orifice is 0.30mm that can be recognized by laser mark.
5. The material is 303 Stainless Steel.
6. 60-70 Degree Cone Pattern Spray
※ REMINDER :
1. Nozzles are WITHOUT filters.
Using properly filtered water helps extend lifespan.
2. Nozzles are WITHOUT anti-drips.
Applying solenoid valves helps drain efficiently.
Your Positive Feedback Gives Us Strength!
※ PACKAGE:
23 pieces nozzles
Orbit 10106 Brass and Stainless Steel Mist Nozzle, 5-Pack
Product Description
The Orbit 10106 Brass and Stainless Steel Mist Nozzle is the most water conservative and efficient mist nozzle available today. It only uses one half gallon per hour per nozzle and features sturdy brass and stainless steel construction.
From the Manufacturer
The Brass and Stainless Steel Mist Nozzle is the most water conservative and efficient mist nozzle available today. It only uses one half-Gallon per hour per nozzle and features sturdy brass and stainless steel construction.
1/4” Slip-Lock, Outdoor Mist Tee Nozzle, Water Brass Misting Mister Nozzle, Misting Nozzles Kit, with Thread 10/24 UNC Tees 10pcs and 0.4mm Orifice Nozzle 12pcs, for Outdoor Cooling System
- Misting Nozzle Tees 10pcs and Nozzle 12pcs in a bag
- Brass,
- Thread Size is UNC10-24
- Orifice Mist nozzle Diameter: 0.4mm
- stainless steel orifce
- Suitable for 1/4” Pipe
- Quick Pushing Nozzle seat
- Thread size is UNC10-24
- Low Pressure Mist Nozzle seat
- For outdoor use with cold water only
- Food grade material
- Can work under normal pressure(2-3kg)
- Max. Working Pressure: 30 BAR (450 PSI)
● Mist Nozzle Tees 10pcs and Nozzle 12pcs in a bag;
● Inlet diameter is 1/4”, suitable for 1/4′ Pipe; Thread size is UNC10-24;
● Designed for our low pressure misting system.
● Feture: Slip lock quick pushing;
● Mist spray nozzle is applied the low-pressure thoery, the spraying liquid could be runing water ;
● The misting performance is excellent. This type of nozzle is applicated in the low pressure fog- making.
● Material is brass, stainless steel orifce Thread Size is UNC10-24 .Orifice Diameter: 0.4mm.
● It is a good match with the misting fitting , Misting Nozzle Mist Nozzle, 12-Pack
EONBON Misting Nozzles Kit 12pcs Brass Mister Nozzles 0.4mm 10/24 UNC, 10pcs Thread Misting Nozzle Tees 1/4" Slip-Lok with 1pcs Plug for Misting System Outdoor Cooling System
- Package: 10pcs Misting Nozzle Tees and 12pcs Brass Misting Nozzles with 1 x Plug.
- Parameter: Can work under normal pressure: 2-3kg
- Max working pressure: 30 BAR (450 PSI).
- Misting Nozzles: Thread size is UNC 10-24
- Orifice diameter is 0.016” (0.4mm)
- Stainless steel orifice.
- Misting Nozzle Tees: Suitable for 1/4” pipe
- Slip lock quick pushing.
- Application: Low pressure nozzle seat, great for any outdoor cooling space including patios, decks, porches, poolside or play areas.
Description:
Package — 10pcs Misting Nozzles Tees with 12pcs Misting Nozzles and 1 x Plug;
Misting Nozzles — Thread size is UNC 10-24; Orifice diameter is 0.4mm; Stainless steel orifice.
Misting Nozzles Tees — Suitable for 1/4” pipe; Slip lock quick pushing.
Designed for our low pressure misting system, it is a good match with the misting fitting. The mist spray nozzle is applicated in the low pressure fog – making, the spraying liquid could be running.
Yotako Misting Nozzles Kit 12x Brass Mister Nozzles 0.3mm 10/24 UNC+ 10x 1/4” Slip-Lok Misting Nozzle Tees+ 1x Plug, Fog Nozzles for Patio Misting System Outdoor Cooling System Garden Water Mister
- 【Renew Misting Set up】– Operation Pressure: 20-70kg/Cm, Flow Rate: 80-145ml/Min, Working pressure: 30- 450PSI, Best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, umbrella, patio mister systems, outdoor misting misters cooling system,drip irrigation kit
- 【Mister Nozzles】– 10/24 UNC thread, 0.012” (0.3 mm) orifice, stainless steel brass body, self-sealing o-ring included, leak-proof no tape or sealant is required
- 【Misting Nozzle Tees】– Slip lock quick pushing, fit for 1/4” misting systems,great used for water cooling,it can delivers very fine mist to significantly cool the air in the hottest summer weather
- 【Maintain Fog Nozzles】– Hard water, lime and calcium may clog the fogger nozzles, Clean nozzles periodically by soaking them in vinegar & warm water solution, Replace sediment filters (not included), Remove them at the end of the season
- 【Package】– 10 x Slip-Lok Misting Nozzle Tees, 12 x Nozzles, 1 x End Plug,those misting cooling system directly use tap water to spray and cool down, no electricity,and can save 70% of water when compare with manual watering on irrigation you
Conclusion
By our suggestions above, we hope that you can found brass misting nozzles for outdoor cooling system cleanable for you.Please don’t forget to share your experience by comment in this post. Thank you!
