Best All Metal Hotend With Slotted Cooling Block For Duplicator 6

This is Micro Swiss All Metal Hotend kit with redesigned cooling block for Wanhao i3 with the following improvements: Micro Swiss All Metal Hotend Kit Features: All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length. STEP BY STEP INSTALLATION INSTRUCTION https://store.micro-swiss.com/pages/micro-swiss-all-metal-hotend

Color: silver

Packing size: 11*13*1CM

Kit weight: 36.8G

Orifice size available: 0.4mm

Applicable models:
Wanhao i3
Wanhao i3 Plus
Monoprice Maker Select 3D Printer v2
Monoprice Maker Select Plus
Cocoon Create 3D Printer

Kit Includes:
1*Wear resistant nozzle
1*Thermal tube
1*Slotted cooling block

All metal hotend kit features:

All metal hotend upgrade for MK10 style extruders. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature than possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On MK10 extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

This is Micro Swiss All Metal Hotend kit for Wanhao Duplicator 6. This upgrade includes a modified thermal barrier tube and modified nozzle with modified cooling block. Thermal barrier tube is made from 2 different materials. The lower thermal break is made from stainless steel, and the colder upper part is made from aluminum. Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. All metal hotend will let you print at much higher temperature then possible with original PTFE lined one. Another benefit of an all metal hotend design is more consistent melt chamber control. During slow extrusion rate, in PTFE lined hotend, transition zone from solid to molten plastic tends to creep upward creating more stringy prints. With all metal design a transition zone is always constant, being located right at the heat break. With fast extrusion rate, PTFE tube doesn’t have enough thermal conductivity to properly melt all the plastic coming out. On original extruders that limitation happens around 60 mm/s, depending on nozzle size. All metal hotend solves this problem, plastic is surrounded by thermally conductive nozzle throughout its length.

Aluminum Water Cooling Block:

Specifications:
– Product Size: 40 x 80 x 12mm
– Processing: Vacuum Aluminum Brazing
– Polishing working surface and better heat absorption

Features:
❃ The internal flow channel is extruded into an M-shaped flow channel to maximize the hot and cold exchange area.
❃ The pagoda nozzle has a minimum outer diameter of 7mm and can be connected to an inner diameter of 7-8mm Water pipe.
❃ Applicable to computer CPU, graphics gpu heat, motherboard, xbox consoles cpu, graphics, semiconductor cooling piece, industrial inverter driver, laser head cooling and industrial control cabinet cooling.

Package Content:
2 X CPU Water Cooling Block

Lilink– 3 Sizes Aluminum Water Cooling Block Liquid Water Cooler Heat Sink System for CPU Graphics Radiator Heatsink

Specification:
Condition: 100% Brand New
Item Type: Water Cooling Block
Material: Pure Aluminum
Processing: Vacuum Aluminum Brazing
Interface outer diameter: Approx. 9.5mm / 3.7in
Interface inner diameter: Approx. 6mm / 2.4in
Application: Suitable for computer CPU water, industrial inverter drive, laser head cooling, industrial control cabinet cooling
Optional Size:
#1: Approx. 80 * 80 * 15mm / 3.1 * 3.1 * 0.6in
#2: Approx. 80 * 160 * 15mm / 3.1 * 6.3 * 0.6in
#3: Approx. 80 * 250 * 15mm / 3.1 * 9.8 * 0.6in

Package List:
1 * Water Cooling Block

Note:
1. Please allow slight error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

Tenta Kitchen Stainless Steel Slotted Spoon (Kitchen Skimmer) – Elegant and practical.

No reason not to believe it’s beauty, brings your family a more efficient and elegant food cooking experience.

Food Grade – Stainless Steel 18/10
Process – stainless steel
Handle – smooth feel like baby skin
Vacuum Handle Design – Good Thermal Conductivity – High Temperature
Safe and healthy – non-toxic, never rust, BPA Free
Easy to clean – dishwasher safe
Life – Can be used for more than ten years
Maintenance – After cleaning, pay attention to wipe clean and prolong service life
Size – Length 13″ x 4.7″
Weight – 3.7Oz /105g

Package contains: 1 x Kitchen Skimmer

Note & Maintaince:

Not recommended microwave but dishwasher safe for you convenience
Please wipe clean before and after using
Rejecting touching sharp objects

100% Return Guarantee

Cuisinart is serving up a beatuiful line of functional, elegant tools with terrific table appeal. Hollow-handled and perfectly balanced, they are just as comfortable and useful in the kitchen as they are elegant for tableside serving.

Conclusion

By our suggestions above, we hope that you can found all metal hotend with slotted cooling block for duplicator 6 for you.Please don’t forget to share your experience by comment in this post. Thank you!