homesellquick Finding your suitable readers for home brew ferment in kegerator with temp regulator is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for home brew ferment in kegerator with temp regulator including detail information and customer reviews. Let’s find out which is your favorite one.
746 reviews analysed
Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
Inkbird Thermostat ITC608T Dual Temperature Probe Temperature Controller Pre Wired AC Dual Stage Cooling Heating Outlet 12 Period Timer Stage 120V 15A 1800W 2 Temp Sensors Reptile Incubator Brewing
- Two temperature probes can be insert into P1 and P2 interface. Temperature senor is waterproof.
- US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃). Max Loading: 120V 15A 1800W.
Description:
Maximum Output Load: 120Vac, 60Hz, 15A, 1800W
Temperature Measurement Range: -40~100°C /-40~212°F
Temperature Display Accuracy: 0.1°C /°F (<100°c f)="">
Display Unit: °C /°F (Temperature)
Ambient Temperature: -20~60°C /-4~140°F
Temperature (Storage Environment): 0~60°C / 32~140°F
Humidity (Storage Environment): 20~80%RH (Unfrozen or condensation state)
Temperature Sensor Cable Length: 2m (78.74 in)
Input Power Cable Length: 1.5m (59.05 in)
Unit Dimension: 20.8 cm x 8.5 cm x 3.5 cm (8.19 x 3.35 x 1.38 in)
Warranty: 2 years
Package Included:
1x ITC-608T Temperature Controller
2x Temperature Sensors
1x Manual
Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier
- Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
- More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
Main features:
*Plug and play design, easy to use, can control temperature and humidity at the same time
* Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support reading with Centigrade or Fahrenheit unit
* Maximum output load: 1800W (120V, 15A)
*Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity calibration
* Compressor delay protection for refrigeration control
* High and low temperature/humidity alarms are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
* Support setting 12 different temperatures in 12 different time period
Specification:
Maximum output load：120Vac, 60Hz, 15A, 1800W
Temperature measurement range：-40℃~100℃/-40℉~212℉
Temperature display accuracy：0.1℃/℉(<100℃ )="">
Relative humidity measurement range：5~99%RH
Humidity display accuracy：0.1%RH
Display unit：temperature：Celsius °C or Fahrenheit °F；humidity：%RH
Ambient temperature：-20℃~60℃/-4℉~140℉
Storage environment：temperature：0℃~60℃/32℉~140℉；humidity：20~80%RH(Unfrozen or condensation state )
Temperature sensor cable Length: 2m（78.74in）
Humidity sensor cable Length: 2m（78.74in
Input Power Cable Length: 1.5m（59.05in）
Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
Warranty: 2 year
Package Content:
1x ITC-608T temperature and humidity controller;
1x Temperature sensor
1x Humidity sensor
1x Manual
Inkbird 12 periods Timer Stage ITC-310T-B Digital Heating & Cooling Pre-wired Temperature Controller For Home brewing, Greenhouse, Heating mat
- [Multipurpose] Mainly used to control temperature during fermentation process of beer and wine brewing, also widely used in home brewing, aquarium, pet breeding, and hatching, etc.
- [Multiperiod] Can be set 12 different temperatures in 12 different periods of time, and the timers will start when the setpoint temperature is reached.
- [Large Time Range] Can be set single or cycle control mode. Wider time setting range: 1~999(min/hr), 1~90(days)
- [Mode & Function] Support °F/°C mode and easy to set. Alarm when over-temperature and sensor error.
- [Dual Relay Output & Display] Dual relay output, be able to connect with refrigeration and heating equipment at the same time. PV and SV dual display windows, be able to display measured temperature and setting temperature at the same time.
ITC-310TB is a dual-relay outlet thermostat with programmable timer function, which can be set to automatically control 12 periods timer stage with different temperatures.
The ITC-310TB is mainly used to control temperature during fermentation process of beer and wine brewing. It also widely used in home brewing, aquarium, pet breeding, hatching.
What’s more, it’s multipurpose for you to use in boiler temperature control, geothermal temperature control, heating pump constant temperature cycle, and strain culture fermentation.
(Seed sprouting, electric heating, electric oven, over-temperature protection and automatic temperature control system of all kinds of electrical equipment, etc.)
Specification:
Temperature Control Range : -50~120°C /-58~248°F
Temperature Resolution : 0.1°C / 0.1°F
Measuring Accuracy : ±1°C (-50~ 70°C) / ±1°F (-58~160°F)
Temperature Control Mode: On/Off Control, Heating and Cooling
Timing Accuracy: 24 hours±1.7s
Periods of Time Max: 12 periods
Cycle Setting: 1-999 times cycle, or 00 infinite cycle
Input Power: 100 ~240VAC, 50Hz/60Hz
Control Output Current: Max.10A
Power: Max. 1200W (110V)/ 2200W (220V)
Alarm: High/ Low Limit setting Alarm
Sensor Type: NTC Sensor (including)
Sensor Length: 2m / 6.56ft
Relay Output: Cooling (10A,100-240VAC)
Heating (10A,100-240VAC)
Input Power Cable Length: 1.5m ( 5ft )
Dimension: 140x68x33 mm(body)
Operating Ambient Temperature: -30~ 75°C / -22~ 167°F
Storage Condition Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No freeze or moisture condensation)
Warranty: 1 Year
Package included:
1 x ITC-310TB Thermostat with Timer
1 x Manual
AGPtek® Universal Digital PID Temperature Controller RNR Control Out Dual display For Fahrenheit(F) and Celsius(C)
- Display: Dual display for Fahrenheit(F) and Celsius?
- Range: -1999 to 9999 (depends on the input signal)
- Main output: Relay,Normal open, AC 250V/3A DC 30V/3A COS¦Õ=1
- PID cooling/heating control( can choose normal alarm output by software)
- Alarm output: 2 lines output,7 kinds of alarm mode.
This is a bid for a dual display universal digital programmable temperature controller that supports many type of thermocouple sensor. It can be powered by 90-265V AC/DC, Comsumption5VA. DIN 1/16.
3 build-in Auto-Tuning Time proportion PID Algorithms to choose for different applications or environments to be controlled. (for variety of industries or home projects heating or cooling applications.)
Accuracy: 0.2%
Input: Thermo Resistor: PT100, Cu50
Thermocouple: J,S,K,E,Wre3 ~ Wre25
Dimension: DIN: 1/16 (48mmX48mmX80mm)
Weight: about 150g
Individually programmable PID control parameters
P, I, d, controlling period, digital filter coefficient, and more¡ (for control theory experts only)
SSR control ready to connect external Solid State Relay to handle High current.
DIN 1/16, great form-factor to be included/build-in to your product.
Apply with step control,1 independent PID control for heating/cooling over temperature,pressure,level,flowm,etc..Widely used in auto system in line of light industry, chemistry, machine, metallurgy,ceramics,pertrification industry, or temperature control and adjust system of food & beverage; oven; furnance, plastic extruder heating process etc;
One key operation, Auto-tuning PID/ Fuzzy PID control.Easy operation,Reliable performance
Input: TC(K¡J¡S¡E)/ RTD£¨Pt100¡CU50£universal input, or 4-20mA/0-10V signal from standard pressure/level transmitter, (24V/30mA supply available for standard transmitter£
Control output: RELAY SSR SCR 4-20mA 0-10V (If 4-20mA output,you can choose PID control or analog output)
Alarm output: 2 lines output,7 kinds of alarm mode.
XpertMatic MH-2000 Digital Temperature Controller AC 110V-220V 10A, Freezer Thermostat Outlet Switch with Heating and Cooling Mode, for Aquarium, Greenhouse, Fermentation, Heater, Brewing, Incubator
- [Easy to Use] Plug and play, simple to program.
- [Easy Switching Between Dual Modes] Supports heating and cooling modes. Can Be Easily switched. Suitable for ac relay cooling and heating devices such as chest freezer, slow cooker, portable air conditioner, small space heater, heating lamp, etc.
- [Dual Display Windows] Simultaneous displays measured temperature and the set temperature at the same time. It has a wide temperature control range from -40℉ to 212℉.
- [Safe Use] With a compressor delay function, it helps to protect your refrigeration and heating equipment. Max output load is 2200W (220V, 10A).
- [Wide Range Of Uses] Can be used for home brewing, fermentation, breeding, making kombucha, and incubation. Widely used in the greenhouse, fermentation chamber, grow room, garage, reptile terrarium, aquarium, etc.
XpertMatic MH-2000 is an accurate digital temperature controller with a wide temperature control range from -40℉ to 212℉.
The temperature controller is able to connect with various heating/cooling equipment, and then work as a temperature control system.
Widely used in homebrewing, fermentation, breeding, making kombucha, and incubation, accelerating germination, etc.
A great digital temperature controller for multiple uses!
Delay Protection
The power-on delay feature design to protect the value and in cases the on/off cycle occurs rapidly.
All-in-one Design
1 Socket for 2 temperature control modes. Designs in a compact size for convenient use.
Accurate Controller
The temperature measurement accuracy is ±0.3℉. You can keep the environment in your desired temperature range.
Specifications:
Working Voltage Range: AC 90V-250V ±10%，50/60Hz；
Relay Capacity: 10A/AC 220V; Power Consumption: ≤3W
Standby Power Consumption: ≤0.5W
Temperature Control Range: -40℉~212℉
Temperature Measurement Accuracy : ±0.3℉
Temperature Control Precision: 0.1℉
Slewing Range : 0.1℉~50℉(Adjustable) ; Temperature Resolution: 0.1℉
Temperature Sensor: NTC 77℉=10K B3435土1%(4.9ft )
Power Cable Length: 4.9ft
Working Environment Temperature: -30℉~150℉,
Humidity: 90%RH; (No Condensate)
Dimension: 6.1*2.4*1.1 in(L*W*H)
Package Includes:
1 x MH-2000 Temperature Controller
1 x User Manual
Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired AC Dual Stage Outlet Thermostat,1800w,ETL Listed Mushroom Greenhouse Chest Freezer Homebrew Keezer(with Temperature and Humidity Sensor)
- 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.)
- 2.√Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
- 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
- 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not.
- 5.√Multifunctional usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
DIGITEN LCD Digital Thermostat Temperature Controller 2-Stage Dual Outlet Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 10A
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Heating & Cooling Mode】: Dual relay output, it can control heating and refrigeration equipment at the same time.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: 1100W@110V, 2200W@220V, max current: 10A.
- ★【Wide Applications & Warranty】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc. 12 month warranty!
The DTC-102 Thermostat is dual-stage, digital temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality.
Features:
Large LCD screen, glare free and eye protected;
Dual relay output, be able to control heating and refrigeration equipment at the same time;
Support reading with Centigrade or Fahrenheit unit;
Max current: 10A;
Max output load: 1100W@110V, 2200W@220V;
Easy to use and program, Plug and play device;
Built-in a temperature correction function;
Delay starting protection for refrigerating compressor;
High and low temperature alarms are available;
Over-temperature and sensor fault alarm;
Heating/Cooling differential could be set separately for refrigeration and heating to protect temperature controller from violent change;
Can use heating or cooling function separately.
Specifications:
Power Supply: 100-240VAC 50/60HZ
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating and Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃,1℉
Buzzer Alarm: High and Low Temperature Alarm
Relay Contact Capacity: Heating(10A, 100-240VAC), Cooling(10A, 100-240VAC)
Sensor Type: Waterproof NTC sensor
Sensor Length:Approx 2m(6 ft)
Input Power Cable Length: 120 cm/4ft
Output Power Cable Length: 30cm/6.5″
Controller Dimension: 137*65*28mm
Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
Packaging include:
1 x DTC-102 Temperature Controller
1 x NTC sensor
1 x Manual
DIGITEN LCD Digital Thermostat Temperature Controller Simple Stage Pre-Wired Heating & Cooling w/Sensor 110V-240V, -40~248℉ for Beer Fermentation Refrigerator Fan Control 10A
- ★【High Accuracy】: The temperature sensor is made of silicone, it is waterproof, high quality. This device provides constant optimal temperatures, and keeps your environment in the ideal temperature range.
- ★【Large LCD screen】: Glare free and eye protected, standard U.S. outlet, plug and play design, support °C/°F display, easy to read and programme.
- ★【Easy to use and program】: Only 2-step settings for your application, it can be used for heating mode or refrigeration mode.
- ★【Convenient Design】: Handheld device appearance consistent with the principles of ergonomics. Max output load: 1100W@110V, 2200W@220V, max current: 10A.
- ★【Wide Applications】: Home wine/beer brewing, aquarium, green house, seedling heat mat, BBQ, boiler operating control, BBQ, grow tent, fermentation, incubation, etc.
This thermostat is simple-stage, electronic temperature controller. The large, lighted LCD screen display is easy to read. The case is designed with fireproof ABS material for human engineering. Temperature sensor is waterproof with high quality, high-accuracy.
Features:
Large LCD screen
Display the sensed temperature, setting temperature, and custom icons on the display indicate working mode, glare free and eye protected.
Support reading with Centigrade or Fahrenheit unit
Easy to use and program
Only 2-step settings for your application, and plug and play design.
With a temperature correction function
Allow user to adjust measuring accuracy base on diferet probe, etc.
Delay starting protection
Protect refrigerating compressor lifetime, avoid compressor to start frequently.
High and low temperature alarms are available
Over-temperature and sensor fault alarm
Specifications:
Power Supply: 100-240VAC 50/60HZ
Max output load: 1100W@110V, 2200W@220V
Max current: 10A
Temperature Control Range: -40~120℃, -40~248℉
Temperature Control Mode: Heating or Cooling
Temperature Resolution: 0.1℃, 0.1℉
Temperature Accuracy: ±1℃, 1℉
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: Waterproof NTC Sensor
Sensor length:Approx 2m(6 fts)
Input Power Cable Length:150cm (5ft)
Output Power Cable Length: 18cm (7inches)
Controller Dimension: 137*65*28mm
Please note:
The controller will save all settings when power failure. The DIGITEN products are guaranteed to the original owner for one year against defects in workmanship and materials. If there are any questions, please contact us, we will help you.
Packaging include:
1 x DTC101 Temperature Controller
1 x NTC sensor
1 x Manual
Johnson Controls A421AEC-01C Electronic Temp Control, SPDT, Gray
- Easy-to-read, bright, adjustable backlit LCD screen displays the temperature
- Basic and advanced programming menus allow you to easily set up your control application on the LCD using a simple three-button touchpad interface
- Adjustable On and Off temperature set points enable easy to set up cooling or heating
The A421 Series Electronic Temperature Controls are single-stage controls with a single-pole, double-throw (SPDT) output relay. A421 Controls feature a bright backlit LCD with adjustable brightness and a three-button touchpad interface that can be set up to restrict user adjustments. An LED indicates the output relay’s On/Off status. Standard A421 Series control modules have simple On and Off temperature settings for heating or cooling, an adjustable anti-short cycle delay, temperature setback, and sensor offset capability. The temperature control range is -40 to 212°F or -40 to 100°C. The A421 controls are available either in Type 1 (NEMA), IP20 (CE), high-impact plastic enclosures suitable for surface or DIN rail mounting or in Type 4X (NEMA), IP67 (CE) watertight, corrosion resistant surface mount enclosures.
Conclusion
By our suggestions above, we hope that you can found Home Brew Ferment In Kegerator With Temp Regulator for you.Please don’t forget to share your experience by comment in this post. Thank you!
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy Home Brew Ferment In Kegerator With Temp Regulator, eg:
- What are Top 10 Home Brew Ferment In Kegerator With Temp Regulator for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 Home Brew Ferment In Kegerator With Temp Regulator to buy?
- What are Top Rated Home Brew Ferment In Kegerator With Temp Regulator to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Home Brew Ferment In Kegerator With Temp Regulator?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Home Brew Ferment In Kegerator With Temp Regulator.
- Before deciding to buy any Home Brew Ferment In Kegerator With Temp Regulator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose Home Brew Ferment In Kegerator With Temp Regulator and What you should consider when buying the Home Brew Ferment In Kegerator With Temp Regulator and Where to Buy or Purchase the Home Brew Ferment In Kegerator With Temp Regulator. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 Home Brew Ferment In Kegerator With Temp Regulator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Home Brew Ferment In Kegerator With Temp Regulator.
