Top 10 Bosch Circular Saw Blades

Product Description

60 teeth for an extra-fine finish and long life in standard or wormdrive saws. Extra high tooth count provides a superior finish in wood, plywood, finished plywood and other construction materials. Bosch C3 carbide tips stay sharper, longer and resist damage from nails and staples. Fits most saw brands and models, including wormdrive. Ideal for fine finish work in remodeling, trim carpentry and general construction.

Amazon.com

The DareDevil line of tool accessories by Bosch combines creativity with unsurpassable boldness to deliver a selection of top performing reciprocating saw blades, circular saw blades, auger bits, and spade bits. Inspired by the Godfather of Freestyle Motocross, Mike Metzger, every DareDevil accessory is built to “Work Hard, Play Hard” at every extreme. Every DareDevil accessory must be the best-in-class in at least one of the following features: speed, cutting ability, or ease-of-use. Experience a bold, daring, and captivating performance now on your jobsite.

DareDevil Circular Saw Blades DareDevil’s circular saw blades are designed with an extra-hard body so that the blades never bend. Designed with C3 micrograin carbide, these blades will stay sharper longer and resist impact damage longer. They also have a signature Speed Coat finish that reduces friction and pitch so that cutting will be even more efficient and effortless. To reduce kickback and extreme heat, these specific blades also feature control cut shoulders and body slots. In addition, they have a thin kerf design allowing for faster cuts and less waste. The triple sharp teeth allow for not only an extremely fast cut but a perfect finish everytime. To avoid warping, these blades have been built with revolutionary espansion slots. These blades are truly the best-in-class in cutting speed. These circular saw blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil circular saw feature diagram. DareDevil Reciprocating Saw Blades The cutting speed and durability of DareDevil reciprocating blades is top-of-the-line. With patented two-by-two tooth geometry, these blades have the ability to cut up to 20-percent faster through metal. They also have a variable tooth pitch of 5/8 teeth-per-inch, increasing the speed of chip removal while making smoother, more precise cuts. The teeth have also have a micro-blast treatment applied to them that preserves the sharpness of the blade and furthers the precision of the cutting edge. To increase durability, these blades have a powder metal steel alloy to resist higher temperatures as well as a titanium coating to reduce heat build-up. In addition, the body height and thickness of these blades have been increased to ensure straighter cuts with reduced vibration. These reciprocating blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil reciprocating saw feature diagram. DareDevil Spade Bits Bosch’s DareDevil spade bits have drilling speed and force that sets them in a performance class of their own. Designed with a patented full cone threaded tip, drilling becomes fast and effortless for these bits. Also unique to these bits is the spur and reamer feature that allows for drilling of cleaner holes. In addition to these features, the contoured paddle design is what really sets these spade bits apart from the rest of the market. This design allows for chip removal to be reached at higher speeds than ever. With chipping speeds this high, DareDevil has added a hex shank power groove at the end of the bit to further reduce slippage during use. These spade bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil spade bit feature diagram. DareDevil Auger Bits Nail killing auger bits are signature to DareDevil in their best-of-class nail-hitting ability and user ease. Built with dual cutting edges and a reinforced tip, these auger bits balance easier nail cutting and accurate drilling with the power to withstand repeated nail hits. To ensure the quality and accuracy of both entry and exit holes, these auger bits have been built with a reamer edge. To improve chip removal, these bits have an open-faced flute design. They also have a reinforced spine for that crucial extra strenght needed when performing heavy-duty application. All of these features combine to decrease the torque impact on nail hits by up to 61-percent while increasing the life of nails up to 9-times. These auger bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil auger bit feature diagram. DareDevil Warranty All DareDevil accessories are backed by a one-year limited warranty. In the instance of manufacturer defects, the item will be backed for one full year by the warranty. Damages caused by use of the product are not covered under the warranty.

Product description

Bosch Dcb1280 Blade 12″ 80T

Amazon.com

The DareDevil line of tool accessories by Bosch combines creativity with unsurpassable boldness to deliver a selection of top performing reciprocating saw blades, circular saw blades, auger bits, and spade bits. Inspired by the Godfather of Freestyle Motocross, Mike Metzger, every DareDevil accessory is built to “Work Hard, Play Hard” at every extreme. Every DareDevil accessory must be the best-in-class in at least one of the following features: speed, cutting ability, or ease-of-use. Experience a bold, daring, and captivating performance now on your jobsite.

DareDevil Circular Saw Blades DareDevil’s circular saw blades are designed with an extra-hard body so that the blades never bend. Designed with C3 micrograin carbide, these blades will stay sharper longer and resist impact damage longer. They also have a signature Speed Coat finish that reduces friction and pitch so that cutting will be even more efficient and effortless. To reduce kickback and extreme heat, these specific blades also feature control cut shoulders and body slots. In addition, they have a thin kerf design allowing for faster cuts and less waste. The triple sharp teeth allow for not only an extremely fast cut but a perfect finish everytime. To avoid warping, these blades have been built with revolutionary espansion slots. These blades are truly the best-in-class in cutting speed. These circular saw blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil circular saw feature diagram. DareDevil Reciprocating Saw Blades The cutting speed and durability of DareDevil reciprocating blades is top-of-the-line. With patented two-by-two tooth geometry, these blades have the ability to cut up to 20-percent faster through metal. They also have a variable tooth pitch of 5/8 teeth-per-inch, increasing the speed of chip removal while making smoother, more precise cuts. The teeth have also have a micro-blast treatment applied to them that preserves the sharpness of the blade and furthers the precision of the cutting edge. To increase durability, these blades have a powder metal steel alloy to resist higher temperatures as well as a titanium coating to reduce heat build-up. In addition, the body height and thickness of these blades have been increased to ensure straighter cuts with reduced vibration. These reciprocating blades are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil reciprocating saw feature diagram. DareDevil Spade Bits Bosch’s DareDevil spade bits have drilling speed and force that sets them in a performance class of their own. Designed with a patented full cone threaded tip, drilling becomes fast and effortless for these bits. Also unique to these bits is the spur and reamer feature that allows for drilling of cleaner holes. In addition to these features, the contoured paddle design is what really sets these spade bits apart from the rest of the market. This design allows for chip removal to be reached at higher speeds than ever. With chipping speeds this high, DareDevil has added a hex shank power groove at the end of the bit to further reduce slippage during use. These spade bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil spade bit feature diagram. DareDevil Auger Bits Nail killing auger bits are signature to DareDevil in their best-of-class nail-hitting ability and user ease. Built with dual cutting edges and a reinforced tip, these auger bits balance easier nail cutting and accurate drilling with the power to withstand repeated nail hits. To ensure the quality and accuracy of both entry and exit holes, these auger bits have been built with a reamer edge. To improve chip removal, these bits have an open-faced flute design. They also have a reinforced spine for that crucial extra strenght needed when performing heavy-duty application. All of these features combine to decrease the torque impact on nail hits by up to 61-percent while increasing the life of nails up to 9-times. These auger bits are available in a wide selection of sizes and packs, making them perfect for the contractor, professional, or heavy duty do-it-yourselfer. Click for full DareDevil auger bit feature diagram. DareDevil Warranty All DareDevil accessories are backed by a one-year limited warranty. In the instance of manufacturer defects, the item will be backed for one full year by the warranty. Damages caused by use of the product are not covered under the warranty.

Product Description

CS10 Model Code: AD (part# CS10) This item features: -Worm drive gear train. -Left-side blade design. -Built-in saw hook. -Anti-snag lower guard. -Die cast magnesium footplate. -50 bevel capacity with positive stop at 45 . -Direct Connect cord management system – Plug any 12-gauge extension cord directly into the tool. -Powerful blower to vent dust anti-snag lower guard on tool wrench storage. -Rafter hanger. -Removable end cap for easy service. -High strength and lightweight magnesium upper and lower guards. -High strength composite footplate. -Adjustable bevel and depth levers. -Direct connect system. -Saw hook. -Blade Diam: 7 1/4 in. -Amps: 15.00 A. -Price is for 1 Each. Testing and approvals: -UL. -OSHA. -Complies to OSHA Standards, UL listed. Model Code  Model Description AAArbor Diam:5/8 in, Voltage:120.00 V, Voltage Type:AC, Speed:5800 rpm, Cutting Depth:2 7/16 in (90 crosscut) [Max], Handle Type:Top, Rear Soft Grip, Includes:24 Tooth Carbide Blade, Work Bag, Wt.:10.40 lb ABVoltage:120.00 V, Voltage Type:AC/DC, Speed:4400 rpm [Max], Cutting Cap.:2 3/8 in (90 crosscut) [Max], Handle Type:Top, Rear Soft Grip, Includes:24 Tooth Carbide Blade, Blade Wrench, Wt.:14 lb ACVoltage:120.00 V, Voltage Type:AC/DC, Speed:4400 rpm [Max], Cutting Cap.:2 3/8 in (90 crosscut) [Max], Handle Type:Top, Rear Soft Grip, Includes:24 Tooth Carbide Blade, Blade Wrench, Wt.:14 lb ADVoltage:120.00 VAC, Speed:5600 rpm, Cutting Cap.:2 7/16 in [Max], 1 7/8 in [Max], Bevel Cap.:56 , Includes:24-Tooth Carbide Tipped Blade, Carrying Bag, Wt.:10.20 lb

From the Manufacturer

Featuring a powerful 15-amp, high output motor, Bosch’s 7-1/4″ Circular Saw offers fast, smooth cutting at a variety of different angles. An advanced composite footplate means increased stability and precision accuracy. Weighing in at just 10.3 lbs., the Bosch CS10 is easy to handle and comfortable to use. An unobstructed view of the cut line means better visibility for more exact cuts. With a soft grip handle for added comfort, and a blower for better dust control, this is one user-friendly tool. The CS10 also Features a 56-degree bevel capacity, along with positive detents at 22.5 and 46 degrees for working on a wide variety of projects. Your purchase includes a 24-tooth carbide blade, a tool wrench and jobsite tool bag.

FEATURES

• Powerful 15-amp motor for fast, smooth cuts
• Adjustable bevel and depth levers for a variety of cut angles
• Unmatched line of sight for accurate cuts
• High strength composite footplate for safety and durability
• On-tool wrench storage for fast and easy blade changes

SPECIFICATIONS

• Blade diameter: 7-1/4″
• Tooth count: 24
• Power rating: 15-amp
• Weight: 10.3 lb.
• Adjustable bevel and depth levers
• Footplate: advanced composite
• Bevel capacity: 56 degrees
• Positive detents: 22.5 and 46 degrees

Product description

Bosch Cs5 Circ Saw 7-1/4″ 15A

From the Manufacturer

The Bosch CS5 120-volt 7-1/4-inch circular saw is a tool for value-conscious professionals focusing on core user needs. The lightweight CS5 delivers 15 amps of power and a left-blade design for the clearest line of sight while cutting. The anti-snag lower guard lets you make cuts without having to advance the guard, even while making bevel cuts.

Diablo Finish 6 1/2in., 40 Tooth Circular Saw blades are the perfect choice for excellent rips and crosscuts using a portable saw. They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood. Arbor Size in. 5/8, Blade Diameter in. 6 1/2, Blade Speed RPM 10,000, Arbor Knockout Yes, Engineered Venting Yes, Teeth qty. 40, Tip Type Carbide, Blades qty. 1, Corrosion Resistant Yes, Tooth Grind ATB, Anti Stick Rim Yes, Blade Use Finish. TiCo hi-density carbide is specifically designed for each application to improve performance Perma-SHIELD nonstick coating shields the blade against heat, gumming and corrosion Super-thin laser cut kerf for fast, durable and clean cuts Tri-metal shock-resistant brazing allows carbide tips to withstand extreme impact for maximum durability Hardened steel body for a longer life and sharper cutting edge Laser-cut stabilizer vents trap noise and vibration and stabilizes the blade Laser-cut heat expansion slots allow blade to expand due to heat build-up, keeping the cut true and straight

Product Description

Engineered to optimize cutting for cordless saws, Steel carbide teeth. Ultra-thin kerf for fast cutting, Alternate face bevel tooth grind, .059" kerf, +3 degree hook angle.

From the Manufacturer

DeWalt DW9152 6-1/2-Inch 36 Tooth Aluminum Cutting Saw Blade with 5/8-Inch Arbor

Product Description

Ideal for all cutting in softwood, hardwood, chip board, or plywood. Thin kerf for fast and smooth cutting action. Computer balanced plate reduces vibration for improved accuracy and better finish.

Amazon.com

The DEWALT DW3106P5 saw blade combination pack contains a 10-inch DW3106 60-tooth fine-finish blade and a DW3103 32-tooth general purpose saw blade. Perfect for miter saw and slide miter saw jobs with softwood, hardwood, chipboard, and plywood, these slim-kerf blades offer quick and even incisions with minimum excess debris. A patent wedge shoulder places additional steel in back of every tip, maximizing strength and precision. Get the cutting action you need at the right price with this heavy-duty combination pack.

6-1/2 in. Saw blades are ideal for framing and cross-cutting applications. The exclusive, patent-pending toughtrack™ tooth design on our framing and ripping blades is engineered to deliver straight, accurate cuts over the life of the blade. Patented body slots reduce vibration, which works with the blade’s thin kerf design to deliver exceptional user feel. High-density tungsten carbide teeth are tough, wear-resistant, and provide long life. The reinforced shoulder is designed for strength and durability by providing impact resistance against nail-embedded wood. These blades come with tough coat™ Anti-stick coating to reduce friction and gumming and are optimized for use on both corded and cordless circular saws. See the chart below for available tooth count options that are right for your application.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Bosch Circular Saw Blades, eg:

• What are Top 10 Bosch Circular Saw Blades for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Bosch Circular Saw Blades to buy?
• What are Top Rated Bosch Circular Saw Blades to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Bosch Circular Saw Blades?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Bosch Circular Saw Blades.
• Before deciding to buy any Bosch Circular Saw Blades, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Bosch Circular Saw Blades and What you should consider when buying the Bosch Circular Saw Blades and Where to Buy or Purchase the Bosch Circular Saw Blades. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Bosch Circular Saw Blades of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Bosch Circular Saw Blades.