Top 10 Gas Oven Flexible Hose

Product Description

Dormont 0240892 Gas Appliance Connector Kit 48 In. Long 5/8 In. Outlet Diameter

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust Safety Shield coating provides extra corrosion protection from accidental contact with common household chemicals

This 24′ Natural Gas Hose has a 1/2″ female pipe thread x 1/2″ male flare quick connect/disconnect with dust plug and cap.

The included 3/8″ Female Flare by 1/2″ Male Flare Brass Adapter can be used to convert NG to standard LP gas appliance.

Specification：

Max Working Pressure :1/2 PSIG

Flow Capacity :100000 BTU/hr

Inlet Diameter : 1/2″ NPT

Outlet Diameter :3/4″-16UNF

Hose Length: 24feet/288inch

Certificate :CSA

72″ Flexible Stainless Steel Gas Appliance Line With 1/2″ OD 1/2 MIP x 1/2 FIP. Stainless steel connector 1/2″ OD (3/8″ ID) 1/2 MIP x 1/2 FIP – Yellow Coated.

Product Description

BOLD GRAPHICS and VIBRANT COLOR-CODING MAKE CONSUMER S SELECTION QUICK and EASY KITS ARE IDEAL FOR NEW INSTALLATIONS OR APPLIANCE RELOCATIONS INCLUDES EASY-TO-FOLLOW TRILINGUAL INSTALLATIONINSTRUCTIONS and LEAK CHECK and SEALANT PACKETS KITS CONTAINS ALL PARTS NEEDED FOR AN EASY INSTALLATION CONTENTS: 5_8 O.D. 48 STAINLESS STEEL GAS CONNECTOR and 3 FITTINGS: TWO 1 2 M.I.P. TAPPED 3 8 F.I.P., ONE 3 4 M.I.P. TAPPED 1 2 F.I.P. ANSI Z21.24 CSA 6.10 ANSI Z21.75 CSA 6.27 PRESSURE RATING UP TO 1 2 PSI

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

From the Manufacturer

This Dormont gas connector is CSA Design Certified domestically and internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum, and LP-gas air mixtures Durable, naturally corrosion-resistant 304 stainless steel construction offers an exclusive no-neck design to increase flexibility Quality flared end fittings create a metal to metal seal to ensure integrity in critical applications Manufactured domestically in the USA, all Dormont gas connectors are 100 percent leak tested to ensure consistent quality you can trust.

BrassCraft’s 3/8 In. Female Flare (1/2 In. MIP) EFV x 1/2 In. MIP x 72 In. Safety+PLUS Gas Appliance Connector is 1/2 In. OD (3/8 In. ID) with a maximum operating capacity of 49,100 BTU’s. This Safety+PLUS gas connector combines excess flow technology with the advanced corrosion resistance of ProCoat, to provide a safer gas connector for home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS valve restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. BrassCraft’s stainless steel gas connector is protected with a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products. ProCoat coating is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.

Product description

M CONNECTOR

From the Manufacturer

Everything you need to hook up your gas range Kit includes gas connector line, 3 fittings and sealant. In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.

This is a Flextron gas connector from their Yc38 series of connectors, which is designed for indoor and outdoor use with gas dryers and water heaters. It has an outer diameter of 1/2″ and an inner diameter of 3/8″ and is made of stainless steel coated with a yellow epoxy coating along the entire length of the connector. The coating gives it extra protection against corrosion when it comes in contact with chemicals that are typically found in households. On the ends of this 22″ long connecter are nut fittings. The connector is rated for use in the temperature range of -40 f to 150 f and can be used up to a pressure of 0.5 psi. Please consult the product information for the flow capacity for this part, for natural gas. The part meets the amse A112.18.6 and ansi Z21.24, Z21.69 and Z21.75 gas appliances and manufactured homes standards. Each connector is 100% tested on leaks before it leaves the factory. The design has been tested on strength and it can withstand an internal hydrostatic pressure of 250 psi or 17 mpa without bursting or showing signs of leaks. It can also endure up to 30 bends without leaks in water at a depth of maximum 2 inches and withstands 15 twists of 90 degrees, without showing signs of corrosion. The connector can handle external temperatures of 800 f.

Our Promise to Readers

We keep receiving tons of questions of readers who are going to buy Gas Oven Flexible Hose, eg:

• What are Top 10 Gas Oven Flexible Hose for 2020, for 2019, for 2018 or even 2017 (old models)?
• What is Top 10 Gas Oven Flexible Hose to buy?
• What are Top Rated Gas Oven Flexible Hose to buy on the market?
• or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) Gas Oven Flexible Hose?…
• All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for Gas Oven Flexible Hose.
• Before deciding to buy any Gas Oven Flexible Hose, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
• You will know how you should choose Gas Oven Flexible Hose and What you should consider when buying the Gas Oven Flexible Hose and Where to Buy or Purchase the Gas Oven Flexible Hose. Just consider our rankings above as a suggestion. The final choice is yours.
• That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
• You could see the top 10 Gas Oven Flexible Hose of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
• You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about Gas Oven Flexible Hose.