Best Silicone Heating Compound Cpu

Features
GD900 Thermal Paste
Specific Gravity: 2.3 G/Cc
Thermal Conductivity: 4.8 W/M-K
Operating Temperature: -58~392 Degrees Fahrenheit
Product features: Accord with RoHS and REACH environmental protection requirements. High thermal conductivity, high insulation, high temperature resistant, low oil separation, non-corrosive.
Working principle: Filling the gape between heating element and the cooling device; Increasing the contact area so as to achieve the soundest  thermal conductivity effect.
Method of use: It’s normal phenomena if there is little silicone oil floating above. Please stir well before use. Keep the coated surface clean and apply directly with tools (such as scraper, finger cot, etc).
Warm notice: Keep children away from it. If it is swallowed or inadvertently come into eyes, ear, nose, mouth,please flush with clean water or send to hospital when necessary.
Storage: Preservation at normal temperature. Please cover it after used, avoiding impurities such as dust, that have a bad effect on thermal conductivity.
Included:
1 x Thermal Conductive Grease Paste

Main Features:
thermal pad has 6.0 W/m K Thermal Conductivity, Used to fill the gap between the heating element and the Heatsink, Achieve the best cooling effect,
At the same time, the thermal pad also has Insulation, Non-conductive, wear-resistant, fire-retardant, compression, buffering, no damage to metal materials, etc effect.

Why use thermal silicone Pad ?
1) The main purpose of the choice of Thermal Pad is to reduce the heat source surface and the heat dissipation device contact surface between the contact thermal resistance,
Thermal conductivity of silicone Pad can be good filling the gap between the contact surface;
2) because the air is hot bad conductor, will seriously hinder the heat transfer between the contact surface,
And in the heat source and the radiator between the installation of thermal silica Pad can be out of the air contact surface;
3) with thermal silicone Pad supplement, you can make the heat source and the heat sink between the contact surface better full contact,
Truly face to face contact in the temperature of the reaction can be achieved as small as possible temperature difference.

Applicable industry:
LED industry, automotive electronics industry, power industry, PDP/LED flat-panel TV,
communications industry, Industrial industry, household electrical appliance industry.

Scope Application:
electronic products, motherboard, motor, external pad and foot pad, electronic, appliances,high power LED lighting,Car machine,
power devices, automotive electronic modules (engine scrubber) Power modules,
high power power supplies, computer host (CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module, hard drives) ,laptop and any electronic equipment needing to be filled with heat dissipation

Package included:
1* 200x200x0.5 mm Thermal Pad

Features:
Apply to RoHS environmental protection requirements.
High conductivity, effective insulation, high temperature resistant, low oil departs non-corrosive.

Working principle: Fill the gap between heating element and the cooling device; Increase the contact area, so as to achieve the soundest effect of thermal conductivity.

Method of use: It's normal phenomena, there is a little silicone oil floating above.
                         Please stir well before use.
                         Keep be painted surface clean, and painted directly with tools (such as syringe, scraper, finger cot, etc.)

Warm notice: Keep children away from it.
If swallowed or inadvertently come into eyes, ear, nose, mouth.
Brush with clean water or send to hospital when necessary.

Storage: Normal temperature preservation.
Please cover it after using, avoid impurities such as dust, which will have effect of thermal conductivity.

Description:
Conductivity: More than 1.2W/m-k
Compatible CPU: ALL
Operation Temperture: -50~200 Degree Celsius
Application: Processor
Resistance: less than 0.211 Centigrade-in*in/W

Specifications:
Material: paste
Paste Color: Gray
Bottle Size: approx. 3*3.5cm(D*H)
Net weight: 18.5g

Package Include:
1 * CPU Heat Sink Compound Silicone Paste  

Used for graphics cards, graphic chips and CPU chips.The thermal pad can lower greatly CPU temperature and solve most of the laptop heatsink problem.

* 100% New Heatsink plaster.
* Application: apply to all heatsinkf no fixed clip thermal paste. Idea for MOSFET Heatsink，VGA CARD Northbridge Southbridge Heatsink.
* Features: thermal properties, strong adhesion
* Melting capacity: 0 (200 ℃ / 24Hours)
* Evaporation: 0.001% (200 ℃ / 24Hours)
* Thermal conductivity:> 1.2W/m-K
* Thermal Impedance: <0.06>
* Clotting time: 3min (25 ℃)
* Strength of connected buildings: 25Kg
* Insulation coefficient> 5.1
* Dissipation coefficient <0.005>
* Temperature resistance: 200 ℃
* Net Weight: 10g

Do not use thermal glue between CPU Chip and heatsink

Package Includes:
1 x Thermal Heatsink Plaster Glue.

100% brand new and high quality

Suitable to use on the CPU/GPU/LED, excellent thermally conductive function.

Used to connect heating unit with heat sink, reach better heat dissipation effect

Notice: please stir evenly before using, remember to close the cover after using. Children is ban to use.

Item Type: Thermally Conductive Silicone Gel Cream

Material: Oxidized Metal

Application: CPU/GPU/LED Heat Dissipation

Package Mode: Needle Tubing

Weight: 40g

Color: Grey

Package Included: 1* Thermally Conductive Silicone Gel Cream

Our thermal CPU paste improves the effectiveness of CPU coolers by thermally bonding the CPU to the heatsink. A high quality metallic solution that helps to ensure maximum dissipation of heat generated by the CPU for optimized performance and greater system stability; and is more effective than standard silicon-based heat grease/CPU paste, providing optimum protection against CPU heat damage.

Specifications:
Material: Silicone Grease
Color: Gray
Height: 3.5cm/1.38in (Approx.)
Diameter: 3cm/1.18in (Approx.)
Net Weight: 10g
Thermal conductivity: > 1.93 W/m-k
Thermal Impedance: <>
Specific Gravity: >2.0
Viscosity: 1000
Concentration: 380±10 1/10mm
Working temperature: ﹣50-280℃
Quantity: 1PC (other accessories demo in the picture is not included)

Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
4.No retail package

Package includes:
1 X Thermal Grease

Conclusion

By our suggestions above, we hope that you can found silicone heating compound cpu for you.Please don’t forget to share your experience by comment in this post. Thank you!