homesellquick 
Nowadays, there are so many products of water cooling esc in the market and you are wondering to choose a best one. You have searched for water cooling esc in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings water cooling esc which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
ZTW Shark Brushless ESC 70A Waterproof Electronic Speed Controller with 5.5V 5A Switch BEC and Water Cooling System for RC Boat Models Part…
- ▶This Shark series of brushless ESC designed for RC boat, suit for all-weather condition races.Continuous Current: 70A, burst current(10s): 80A
- Support battery Nixx/Lipo:5-18NC/2-6Lipo power input. 100% brand new and quality guaranteed!
- ▶Super smooth and accurate throttle linearity and throttle response, compatible with various types of boats. 100% waterproof, can be worked well when the electric speed controller is totally under water.
- ▶Built-in BEC, with large power load and low power consumption, built-in 5.5 V/5 A BEC can provide power for the receiver, which makes the ESC compatible with high voltage servos.
- ▶Ultra low inner resistance of MOSFET combine with efficient water cooling system keep your ESC as cool as possible.Multiple protection functions are available in this RC boat esc, like low voltage cut off protection,over-thermal protection,throttle signal loss protection and electrify safety, which make the electronic speed controller more reliable.
- ▶Support high RPM motors and software can be programmed simply.You can set cyclical menu, the operation is very easy. Please feel free to contact us if you have any issue about this item, we are here for you!
ZTW Shark Brushless ESC 70A Waterproof Electronic Speed Controller with 5.5V 5A Switch BEC and Water Cooling System for RC Boat Models Part
Features:
▶ This Shark series of brushless ESC is designed for RC boat.
▶ Super smooth and accurate throttle linearity and throttle response.
▶ 100% waterproof, can be worked well when ESC totally under water.
▶ Built-in switch BEC with a maximum output of 5Amp ad voltage of 5.5V 5A
▶ Compatible with high voltage servos.
▶ Ultra low inner resistance of MOSFET combine with water cooling system keep ESC as cool as possible.
▶ Supports high RPM motors.
▶ Software can be promgrammed simply.
▶ Over temperature protection: Automaticlly reduce output power while the temperature reach more than 110 ℃, recover power while the temperature is under 100℃.
▶ Electrify safety: The esc itself won’t startup motor ever though radio sticker raised to higher position while power on, in order to aviod motor spin suddenly.
▶Throttle signal loss protection
▶Low voltage cut off protection
Descriptions:
Model Number 9070101
Continuous Current: 70A
Burst Current(10s):80A
Battery NiXX/Lipo: 5-18NC/2-6Lipo
BEC Output: 5.5V/5A
length: 68mm
Width: 37mm
Height: 18mm
Weight: 112g
User Program: Yes
Waterproof:Yes
Package Includes:
1* 70A RC Boat Brushless Electronic Speed Controller
Hello customer, if you have any issue about this item, please feel free to contact us, we are here for you! Thanks!
Similar items with 4 stars and above
Watercooled ESC, Waterproof Brushless ESC 60A Water Cooling Electronic Speed Controller with 5V/3A UBEC for RC Boat Models Part
- Designed for RC boat, giving fastest response of the motor
- Water cooling system can dissipate heat and reduce noise for your model
- Waterproof design ensures the safety of component and extends its service life. (Need to use 704 silicone rubber by yourself)
- It comes with a limited range of programming functions and are designed to be plug-n-play
- It consists of high quality components to get strong current endurance
Specification:
Material: PBC
Color: Black
Size: Approx. 7 * 3.8 * 1.6cm / 2.8 * 1.5 * 0.6inch
Cont Current: 60A
Burst Current: 70A
BEC Model: Switch
BEC Output: 5V, 3A
Recommend Battery: Li-ion/Lipoly 2-4S; Ni-Mh/Ni-Cd 6-18NiMh (Not Included)
Cooling: Watercooled
Weight: 54g
Type: RC Part
Package Includes:
1 x ESC
1 x Manual
Note:
Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep: cell type and No. of cells;
Music tone + 2 beep: throttle setting;
Music tone + 3 beep: brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-4S/6-18NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz
Caredy Watercooled ESC, Waterproof Programming 80A Brushless ESC Water Cooling Electric Speed Controller with 5V/5A UBEC for RC Boat Model
- Designed for RC boat, giving fastest response of the motor
- Water cooling system can dissipate heat and reduce noise for your model
- Waterproof design ensures the safety of component and extends its service life. (Need to use 704 silicone rubber by yourself)
- It comes with a limited range of programming functions and are designed to be plug-n-play
- It consists of high quality components to get strong current endurance
Specification:
Material: PBC
Color: Black
Size: Approx. 9 * 3.8 * 1.6cm / 3.5 * 1.5 * 0.6inch
Weight: 82g
Cont Current: 80A
Burst Current: 95A
BEC Model: Switch
BEC Output: 5V, 5A
Recommend Battery: Li-ion/Lipoly 2-7S;Ni-Mh/Ni-Cd 6-20NiMh (Not Included)
Cooling: Watercooled
Type: RC Part
Package Includes:
1 x ESC
1 x Manual
Note:
Enter programming Mode:
1. Connect your motor and receiver to the ESC, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full. Please note: for futaba most transmitter have the throttle channel reversed by default.
3. Connect you battery and controller, which will initialize with a musical tone.
Phrases 2 programming:
After 3 seconds, the controller will start beeping a sequence of tones followed by one or more beeps. Each sequence represents a parameter that you can program and it repeats 3 times.
The parameters are:
Music tone + 1 beep: cell type and No. of cells;
Music tone + 2 beep: throttle setting;
Music tone + 3 beep: brake setting/throttletype (for Heli);
Music tone + 4 beep: direction and Cutoff Type;
Music tone + 5 beep: timing mode;
User programming options:
Cell Type: NiMH/NiCD/Lipoly/Li-ion
Cell Quantity: 2S-7S/6-20NIMH
Throttle Setting: Auto/Soft/Hard
Brake: No Brake/Soft/Medium/Hard
Direction: Clockwise/Counter Clockwise
Cut off: Soft/Hard
Timing: 1o/7o/15o/30o
PWM: 8Khz/16khz
Pasamer,RC Boat Pump,3-6V 370 Water Cooling Pump JR Plug Accessory Part for RC Boats Motor & ESC
- It is waterproof, and it also works well in water
- JR plug is suitable for pluging in receiver
- Under the condition of 5V voltage, the water pump still works normally without interruption after 15 hours operation. It’s hot but it’s in the normal range, which has no impact on future operation
- Low noise design provides you with perfect playing experience
- Suitable for remote control boat whose motor or ESC needs water cooling
Description:
The 370 pump is suitable for remote control aircraft carrier/warship/battleship whose motor or ESC needs water cooling. The pumping voltage is 3-6V and can be connected to receiver directly. You need to use the step-down module to step down to 5V for the use of pumps if its power supply isn’t receiver and the battery you use is more than 2S battery(2S, 3S, 4S, 5S, 6S) & voltage is between 7-28V.
Features:
1.It is waterproof, and it also works well in water.
2.JR plug is suitable for pluging in receiver.
3.Under the condition of 5V voltage, the water pump still works normally without interruption after 15 hours operation. It’s hot but it’s in the normal range, which has no impact on future operation.
4.Low noise design provides you with perfect playing experience.
5.Suitable for remote control boat whose motor or ESC needs water cooling.
Specification:
Material: Metal
Color: Shown As Pictures
Pump Length: Approx. 73mm / 2.9inch
Weight: 68g
Type: RC Pump
Rated Voltage: 6V
Opetation Voltage: 3 – 6V
@3V Volume Flows of Air: 1.1L/min
@3V Flows of Water: 300ml/min
@6V Volume Flows of Air: 1.8L/min
@6V Flows of Water: 600ml/min
Package Includes:
1 x RC Water Cooling Pump
novahobby CNC Aluminum Small Water Cooling Plate for brushless Speed Control esc RC Boat
Package Contents:
1 PC water cooling plate
Ktyssp 60A Brushless Water Cooling Electric Speed Controller ESC 5V/3A BEC for RC Boat
- ❤The high quality and the cheapest price,you can not find the other one❤
- handheld phone holder set mobile bracket gimbal stand for dji osmo pocket adapter plate expansion board module 6pcs explosion-proof tpu screen protector film full coverage guard camera lock lens cover hood caps tripod head mount 1/4 screw selfie stick tello drone waterproof portable bag body/battery handbag carrying case type-c usb extension extender data sync cable adaptor spark remote control strorage travel box 2pairs led flash propellers blades props rechargeable lightweight mounts stabilize
- hardshell storage mavic series plastic propeller release tool u-wrench blade removal wrench landing pad helipad foldable pro rc quadcopter universal smartphone replacement type to usb-a 3.0 fast professional mrc filters flexible star base accessories 1/2 wrist lanyard strap motor repair parts authentic brushless bicycle clamp gimble cam multi-function inch desk dock table spare 2pair quick-release 360° rotary bike handlebar :Environmental friendly material nontoxic odour free anti broken stable
- Foldable Low Noise Propeller Accessories drone propeller guards Mini guard part balancer Folding Propellers Screw Prop Quick release phantom 4 propellers low noise dji for dji mavic pro propellers for dji mavic pro platinum phantom 3 propellers red carbon guards led dji low noise master airscrew carbon fiber phantom 4 propellers low noise dji yellow dji mavic pro fly more kit for propeller guards bag tello drone battery controller case accessories with boost combo charger platinum batteries
- Helicopter Toy Remote Controls Remote Quadcopter Rc helicopter RC for aircraft Airplane Mini Cars led lights REMOTE CONTROL TOYS Metal Toys Games Gyro Camera Gifts Photography Blade Drone RC Quadcopters Battery Ufo radio control Parts Fashion Control axis Toys Hobbies Men’s Fashion Game Repair Tool 4ch Servo RC Drone RC toy Hobby Boat Case Headphones s5 case case Case 5 case LED Flash RC toys wheel thumb pad lanyard lightning low noise
☛☛☛ ❤Welcome to my store ,there are a lot of products with the high quality ,and the price is cheap, always have your favorite❤ ☚ ☚ ☚
Features:
These series of water cooling ESC designed for RC boat. They are not only offer excellent performance they are also built with the highest quality components to ensure true-to-rating current handling and high efficiency operation.
Water cooling,Waterproof design(Need to use 704 silicone rubber by yourself).
This super simple boat series comes with a limited range of programming functions and are designed to be plug-n-play.
A perfect ESC for those looking for something simple to use and economic.
Phrases 1 Enter programming Mode:1.Connect your motor and receiver to the speed controller, but do not connect the battery yet.2.turn on your transmitter and move the throttle stick to the full throttle position (full up).please note: most futaba transmitter have the throttle channel reversed by default.3.Connect you battery and controller will initialize with a musical tone.
Phrases 2 programming:After 3 seconds, the controller will start beeping a sequence of tones a musical tone followed by one or more beeps. Each sequence represents a parameter that you can program and is repeats 3 times.
The parameters are:
Music tone + 1 beep: Optionas 1. Cell type and No. of Cells;
Music tone + 2 beep: Optionas 1. Throttle setting;
Music tone + 3 beep: Optionas 1. Brake setting/Throttletype(for Heli);
Music tone + 4 beep: Optionas 1. Direction and Cutoff Type;
Music tone + 5 beep: Optionas 1. Timing mode;
Specifications:
Cont current: 60A
Burst current: 70A
BEC model: Linear
BEC output: 5V/3A
Recommend battery: Li-ion/Lipoly 2-4S;Ni-MH/Ni-Cd 6-18NIMH
Cooling: Water cooled
ESC weight: 52g
ESC size: 73mm x 36mm x 15mm
Package Includes:
1 x Brushless Water Cooling Electric Speed Controller ESC
Aquacraft ESC Water-Cooling Jacket SV27
ESC Water-Cooling Jacket SV27
480A 4S Brushed Speed Controller ESC for Water Cooling RC Boat Hobby #1662
Features:
It can connect two motors
100% brand new and high quality
This ESC can work with 380 540 775 Brush Motor
One-piece design (built electrolytic capacitors), fully waterproof and dustproof, adapt to climate and environment;
Bidirectional operation mode, you can move forward and backward, for a variety of models;
High-quality materials, with a strong resistance to current capacity;
Powerful BEC output capability, over other competing products;
Autothrottle stroke calibrated, easy to use, especially for the novice;
DIP switch settings using ESC parameter, plain and simple;
With a lithium-voltage protection, over temperature protection, throttle signal loss protection and multiple protection features
Specifications:
Plug: T plug
Sustained current: 80A / 480A
Peak current: 480A
Supply voltage range: 2S to 4S cell Li-Po or section 5-11 NiMH battery or 12V The motorcycle
battery
BEC output: 3A / 5V
Size: 42mm*28mm*21mm
Net Weight:62g
Package includes:
1 x Brushed ESC
Conclusion
By our suggestions above, we hope that you can found water cooling esc for you.Please don’t forget to share your experience by comment in this post. Thank you!
