The 9 Best 40Mm Heatsink 3M
Nowadays, there are so many products of 40mm heatsink 3m in the market and you are wondering to choose a best one. You have searched for 40mm heatsink 3m in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 40mm heatsink 3m which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
38,919 Reviews Scanned
DGZZI 2PCS Golden Aluminum Heatsink 40x40x11mm Square CPU Heat Sinks Cooling Cooler Fin with 2PCS 3M Silicone Based Thermal Pad
- Heatsink size: 4x4x1.1cm/1.57×1.57×0.39in
- Color: golden
- Material: aluminum
- The heatsink with 3M tape,It is easy to use, Viscosity is very strong.
- Used for IC, Diode, Dynatron, Electronic, LED, RAM, CHIP computer’s component heat dissipation, or anywhere you need a efficient heatsink.
- Package includes: 2pcs 40x40x11mm Heatsinks + 2pcs 3M Silicone Based Thermal Pad
Heatsink size: 4x4x1.1cm/1.57×1.57×0.39in
Material: aluminum
Color: golden
The heatsink with 3M tape,It is easy to use, Viscosity is very strong.
Used for IC, Diode, Dynatron, Electronic, LED, RAM, CHIP computer’s component heat dissipation, or anywhere you need a efficient heatsink.
Package includes:
2pcs 40x40x11mm Heatsinks
2pcs 3M Silicone Based Thermal Pad
Thermal Adhesive Tape 20mm by 25M, HPFIX High Performance Thermally Conductive Tape Apply for Coolers, Heat Sink, LED Strips, Computer CPU, GPU, Easy to Apply & High Durability
- ???? HPFIX thermal adhesive Tape is a simple and practical heat conductive tape, very easy to use, even for beginners.
- ???? Thermally conductive tape has very strong adhesion and has good thermal conductivity. It is often used on heat sinks- efficiently transfer heat dissipation for electronics. If combined with thermal paste, the effect will be better.
- ???? HPFIX thermal tape has thermal conductivity 1.5 W/m-k to meet most of electronics heat dissipation demands.
- ???? Thermal tape is widely used for high power LED,High power power supply, Computer CUP, GPU, automotive electronic heating module, motor controller, communication equipment, power semiconductor, MOS tube,GBT chip,Video Card RAM, DDR Memory Modules, SSD drives, new energy heating power.
- ???? Themral tape heat conductivity is high and stable, its life is longer than the general heat-dissipating double-sided sticker, and it can work for at least 5 years at normal temperature (80-120°C ).
Specification:
Dimension: 20mm x 25m
Thickness: 0.2mm
Reinforcement Carrier : Fiberglass Mesh
Thermal Conductivity:1.5 W/m-k
Breakdown Voltage: 4KVAC
Thermal impedance : 0.3℃in2/w
Initial Adhesion: 1.3kg/inch
180°Adhesion power: >16 N/25mm
Heat Resistance: 120°C (long time), 180°C ( short time)
Applicable temperature range:-30~+120 °C
Application:
Electronics Components: IC、CPU 、MOS …….
LED、M/B、P/S 、Heat Sink 、LCD -TV 、Notebook PC 、PC、Telecom Device、Wireless Hub
DDR Module 、 DVD Applications 、 Hand-set Application
Features:
★ Good adhesion (Acrylic PSA)
★ Very good thermal conductivity
★ Soft and compressibility
★ Easy to assemble
★ Long lifetime working normal temperature(80-120℃ ) can work for a minimum of 5 years
Notes For Attention:
1.When using thermal conductive double-sided tape, keep the adhesive surface clean and dry.
2.After tearing off the heat-conductive double-sided tape to peel the paper, double-sided thermal tape is evenly pressed with your fingers (just a little strength).
3.The viscosity of the heat-conductive double-sided adhesive tape have initial viscosity and persistent viscosity, and at room temperature, it takes 72 hours
to achieve the maximum adhesive strength. That is, at the beginning of the sticky adhesive that is the initial viscosity to 40% of its maximum viscosity, persistent stickiness is stable over time.
4.In the paste process, the appropriate heating (60 ~ 70 ℃), will greatly contribute to the effective increase in the area of adhesive, and as soon as possible to achieve maximum adhesion.
In the lower temperature of the winter, it’s little tips that heating to increase the viscosity of the heat-conductive double-sided tape when using the thermal conductive tape.
Package included:
1 Roll Thermal Conductive Double-sided Tape
Similar items with 4 stars and above
LLPT Double Sided Thermal Conductive Strong Adhesive Tape Multiple Sizes Available 1.2 Inches x 108 Feet x 12 Mil for Electronic Components LED Strips Heat Sinks(TC128)
- APPLICATION: LLPT 2-sided thermal adhesive tape meets ASTM D5470 with high coefficient for thermal conduction on electronic components, like controller, semiconductor, MOS, IC, GBT, SSD, computer CPU, GPU, RAM & DDR memory modules and so on
- easy mountings to replace screws for electronic components to increase the work efficiency, printing industry, filling gap on uneven surfaces of electronic components for tight fit, holding LED strips and etc.
- MATERIAL: LLPT double sided extra thick (12 mil) thermal conductive tape is a combination of fiber glass that fills conductive ceramic powder for high efficiency and flexibility of thermal conduction & insulation
- coated with strong Acrylic adhesive, removable, repositionable and residue free for easy mountings to save time and work better on electronic.
- EASY USE: Ideal to mount heat sink to IC chip, fit parts to heating source devices and hold LED strips
- clean the dust before application and cut the size as needed, stick and compress the tape, then take off the blue backing film liner by hand to mount another part. The removable property is to allow reposition after application without any damages to components. Avoid finger prints on adhesive layer for strong holding.
- FEATURE: LLPT Thermal Conductive tape has high thermal conductivity, insulation, strong adhesive, flexibility, compression, high tensile strength to hold the components firmly in place, have the most effective thermal dissipation and widely used in electronic devices.
- LLP-TAPES: LLPT produces various tapes for industrial & commercial use with ideal sizes & thickness based on the desires of users. LLPT is dedicated to provide high utility on the product with competitive price with great packing protection during transition. Search LLPT-TAPES on Amazon for other tapes like PET Repair Tape, Yellow Woodworking Tape, Aluminum Foil Tape, PE Foam Tape, Black/Gray/Clear Acrylic Tape and Gaffer Tape.
WHY CHOOSE LLP-TAPES(Brand Registered)?
LLPT ensures fast delivery and hassle free refund if you are not satisfied with the performance of our product because we have unsurpassed quality control per ISO9001 to all items before leaving factory to Amazon.
PRODUCT FEATURES::
– Coated with strong Acrylic adhesive on both sides.
– High thermal conductivity, flexibility, insulation and long life support.
– Widely used in LED lighting, automotive electronics, household electrical appliances, consumer electronic devices, power devices, PDP/LED TV, communication, computer/laptop like CPU, GPU, USICS, RDRAMTM, CD-ROM, IGPT module & hard drives.
– Work temperature range: -20°C to 120°C.
– Extra thickness, 12 mil; appropriate heating low temperature will increase greatly on stability and durability in the area of adhesive.
– Meets ASTM D5470, industrial grade especially for electronic industry.
– White color with blue backing liner protective film.
– Packed in single PE bag.
– Available Size: 1.2” width x 108 feet long and 1.6” width x 108 feet long.
SPECIFICATION: :
– Width: 1.2” and 1.6” are available.
– Length: 108 feet.
– Thickness: 12 mil with 2.7 mil blue backing liner.
– Adhesive Strength: 5lbs/square inch.
– Adhesion: >20N/1.2 inch width; >25N/1.6 inch width.
– Stripping Strength: PSTC-101, >17N.
– Breakdown Voltage: 6KVAC.
– Thermal Coefficient: 1.5 W/M-K.
– Work Temperature: -20°C to 120°C.
– Thermal Impedance: 0.3°C In 2/W.
– Tension: PSTC-7, >48 HRS.
– Material: Fiberglass with conductive ceramic powder.
NOTE: KEEP THE ADHESIVE SURFACE CLEAN & DRY, AVOID FINGER PRINTS FOR LONG DURABILITY AND COMRESS THE PARTS AFTER MOUNTING.:
Similar items with 4 stars and above
Easycargo 100pcs Heatsink Kit Small Cooler Heat Sink Set for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator
- Update Version: 100pcs (18+82) small to medium sizes of heat sink.
- Small anodized Aluminium: 20pcs 9x9x5mm, 8pcs 10x10x10mm, 8pcs 11x11x5mm (L*W*H)
- Medium anodized Aluminium: 8pcs 14x14x7mm, 8pcs 19x19x5mm, 8pcs 20x20x6mm, 2pcs 22x22x10mm (L*W*H)
- Silver Tone Aluminium: 20pcs 7x7x6mm, 10pcs 8.5×8.5x8mm, 8pcs 15x15x6.5mm (L*W*H)
This set of cooler heat sink includes 10 different small to medium range sizes of heatsinks. It is totally composed of 100pcs of heatsinks including: Small anodized Aluminium: 20pcs 9mmx9mmx5mm, 8pcs 10mmx10mmx10mm, 8pcs 11mmx11mmx5mm; Medium anodized Aluminium: 8pcs 14mmx14mmx7mm, 8pcs 19mmx19mmx5mm, 8pcs 20mmx20mmx6mm, 2pcs 22mmx22mmx10mm, Silver Tone Aluminium: 20pcs 7mmx7mmx6mm, 10pcs 8.5mmx8.5mmx8mm, 8pcs 15mmx15mmx6.5mm (L*W*H). Can be used for cooling of variety of electrical components such as Development Boards VRAM VRM CPU GPU VGA RAM IC Chips LED Laptop MOSFET Transistor SCR Southbridge Northbridge Voltage Regulators.
Similar items with 4 stars and above
Dorhea 6Pcs 40mm Heatsink Cooler Cooling Heat Sink Radiator Chipset 40mmx40mmx11mm Aluminum Heatsink Fin 1.57"x1.57"x0.43" for Cooling 3D Printers, TEC1-12706 Thermoelectric Peltier Cooler (Black)
- Aluminum heatsink with 3M Thermal ,good cooling, strong heat conductivity and heat dissipation
- Heat Sink Size:40mm x 40mm x 11mm / 1.57″” x 1.57″” x 0.43″”(L*W*H)
- The fins increase the area of the board and thus provide for greater heat transfer
- Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.
- Package Include: 6 Pcs 40mm x 40mm x 11mm black aluminum heatsink cooling fin
Specifications:
Product Name: Heatsink
Material: Aluminium
Color: Black
Overall Size: 40 x 40 x 11mm/ 1.57″” x 1.57″” x 0.43″” (L*W*H)
This heatsink kit can be applied in stepper motors of 3D printers, thermoelectric peltier
IC circuit board, main board, triode, MOS tube, TO-3P high power tube
Electronic audio function module, power supply block, air-cooled aluminum heat sinketc
Package Include : 6 x Heatsink with 3M Thermal
Similar items with 4 stars and above
Heatsink Heat Sink + External Cooling Fan Kit for Raspberry Pi Model B B+ B Plus 2 3 3+ Geekstory(2 Pack)
- The heatsink and cooling fan work with Raspberry Pi Model B B+ 2 3. It also can be used for the newest Raspberry Pi 3 Model B+
- It can not work for Raspberry pi zero, because there is no pin header on zero
- Large heatsink size : 14mm * 14mm * 7mm, small heatsink sizel: 9mm * 9mm * 5mm
- You will receive 2pcs large heatsink + 2pcs small heatsink + 2pcs cooling fan
- This kit is used for Raspberry pi development board and other electronic chip auxiliary cooling .If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
Heatsink
Material: aluminum
Process: oxidation
Size-Large: 14mm * 14mm * 7mm
Size-Small: 9mm * 9mm * 5mm
Applications: Raspberry pi development board and other electronic chip auxiliary cooling
How to use it?
First, clean the surface of the electronic components, to ensure there is without greasy and debris, etc., to keep the surface dry
Second: tear off the protective film which back of the heatsink
At last:Attach the heat sink to the required cooling chip, press the heatsink for 2 or 3 times
Cooling External Fan
Parameters: 5V 0.2A
Size: 30*30*7mm
Stability, air volume, sound small
Weight: 9g
Applicable: for Raspberry Pi 3 2 Model B B+ A
Note: It can not work for Raspberry pi zero, because there is no pin header on zero
Package Included:
2 x large heatsink
2 x small heatsink
2 x cooling fan with screw and nuts
BCP 1roll 20mm x 25m Double Side Adhesive Thermal Conductive Tape for Heatsink LED
Product Specification:
Glass fiber thickness: 0.1mm
Thermal Conductivity:1 W/m-k
Breakdown Voltage: 3KVAC
Thermal impedance : 0.3℃in2/w
Adhesive power:6.5 N/cm
Volume resistance: 3X1013ohm/cm
Applicable temperature range:-20~+120 °C
Easycargo 4pcs 40mm Heatsink Kit 40x40x11mm + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink for Cooling 3D Printers, TEC1-12706 Thermoelectric Peltier Cooler 40mmx40mmx11mm
- Includes 4 pcs black anodized aluminum heatsink
- Pre-applied thermal conductive adhesive tape backing
- Can be applied for passive cooling of 3D printers, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc.
- Dimension: 1.57 x 1.57 x 0.44 inch / 40 x 40 x 11mm (L*W*H)
- Weight: 0.6 oz / 17 gr per pc
4 pieces 40x40x11mm anodized black aluminum heatsink kit can be applied on devices to cool 3D printers, TEC1-12706 Thermoelectric Peltier Cooler, LED, FPV transmitter, etc.
Material: Black Anodized Aluminum
Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x11mm (L*W*H)
Weight: 0.6 oz / 17 gr per pc
Package includes:4 pieces anodized aluminum heat sink
Similar items with 4 stars and above
DGZZI Aluminum Heatsink 4PCS 40x40x11mm Black Aluminum Cooling Fin Radiator with 3M Thermal Conductive Adhesive Tape for Cooling GPU IC Chips VRAM VGA RAM
- Components for IC, diode, generator, electronics, LED, RAM, CHIP computer cooling, or wherever efficient cooling is required.
- Designed to maximize its surface area in contact with cooling air.
- The heat sink uses 3M tape, which is easy to use and has a very strong viscosity.
- Made of high-quality aluminum, fast heat conduction, good heat dissipation effect and long service life. Reduce the risk of hardware failure due to overheating.
- Size: 40 x40 x11 mm / 1.57 x1.57x 0.39Inch(LxWxT).Color: Black.Package: 4PCS Heat Sink.
Product description
Specifications:
Product Name: Cooling Fin
Material: Aluminum,
Size: 40 x40 x11 mm / 1.57 x1.57x 0.39Inch(LxWxT)
Color: Black
Package: 4PCS Heat Sink
Feature:
Used for Electronic,CHIP,IC,Diode,Triode,MOS, computer ‘s component heat dissipation,or anywhere you need a small efficient heatsink.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 40mm heatsink 3m, eg:
- What are Top 10 40mm heatsink 3m for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 40mm heatsink 3m to buy?
- What are Top Rated 40mm heatsink 3m to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 40mm heatsink 3m?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 40mm heatsink 3m.
- Before deciding to buy any 40mm heatsink 3m, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 40mm heatsink 3m and What you should consider when buying the 40mm heatsink 3m and Where to Buy or Purchase the 40mm heatsink 3m. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 40mm heatsink 3m of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 40mm heatsink 3m.
Conclusion
By our suggestions above, we hope that you can found 40mm heatsink 3m for you.Please don’t forget to share your experience by comment in this post. Thank you!