homesellquick 
Nowadays, there are so many products of 3m epx plus ii applicator in the market and you are wondering to choose a best one. You have searched for 3m epx plus ii applicator in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3m epx plus ii applicator which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
38,568 Reviews Scanned
3M 50004 Scotch-Weld EPX Plus II Applicator W 10:1, 2:1 and 1:1 Plunger Model 91
- Markets: Industrial General, sporting goods, solar energy, wind energy, composites, electronics, aerospace, military, transportation and materials.
- Applications: gluing, joints, gluing, fixing, mounting, encapsulating and sealing plant.
- Comes with 10:1, 2:1 and 1:1 plungers
- Markets: General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation and aerospace.
Product Description
This applicator is a low-cost portable, self contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied.
From the Manufacturer
This plunger is for the 3M Scotch-Weld EPX Plus II Applicator. The EPX Plus II Applicator is used to dispense 3M Scotch-Weld adhesives in duo-pak cartridges. The applicator is a low-cost portable, self contained metering, mixing and dispensing machine that simultaneously meters and mixes two-part adhesives as the material is applied.
Dispenser Gun, 50ml Dispensing Gun Kit Impression Mixing Dispensing Dispenser AB Gun 1:1/1:2
- Fitting mixing gun, Size:19 x 18 x 6cm/ 7.48″ x 7.09″ x 2.36″, Tube cartridges capacity: 50ml
- It’s suit for 50ml kits, works with Loctite, Devcon, Araldite, Gorilla, and others with standard 50ml cartridges
- Don’t be distracted by the plunger diameters as this tool also works on similar material kits with 2:1 and 1:1 ratios
- Automatic mixing and delivery of impression materials made easy with this handgun cartridge dispenser
- Used for smearing or dripping various two-component adhesives or coatings to solve the problem of uneven mixing of two-component adhesive products.
1. Very suitable for standard manual operation, user-friendly design, demolition and use are very simple.
2. Mixing and delivery of impression materials made easy with this handgun cartridge dispenser.
3. Widely used in two-liquid mixture, such as: epoxy resin, silicone and other 50ml two-component glue.
Specifications:
Material: Plastic,Metal
Suitable: 50ml
Ratio: 1:1/ 1:2
Size: 19 x 18 x 6cm/7.48″ x 7.09″ x 2.36″
Weight: 210g
Package Include:
1 x Impression Mixing Dispensing Dispenser Gun
3M 08190 Performance Manual Applicator for 50 ml Cartridges, 50 Milliliter, Black/Gray
A manual applicator gun designed for use with 3M’s 1:1 50mL and 2:1 37.5mL cartridges
MixPac DMA50 Dispensing Gun Kit for 50ml Epoxy & Adhesive Cartridges (1:1 & 2:1 Ratios)
- Industry standard Dispenser for 50ml Dual-Barrel cartridges. No-Drip design, Impact Restistant Hardened Plastic body, lightweight & extremely durable
- Also known as DMA51-00-10, it works with all major adhesive brands, including Loctite, Devcon, Araldite, Lord, Masterbond, Plexus, and all others with standard 50ml cartridges
- Consistent and precise metering: Full Squeeze dispenses 4.1 grams (2 plunger clicks)
- Kit Includes One integrated dual-ratio plunger, that works for both 1:1 and 2:1 ratio cartridges
- Note: This gun does not fit dental or medical cartridges. if your cartridge is ’rounded’ on the back, and not rectangular, then this gun will not fit. See below for the correct gun.
MixPac, the industry standard for epoxy and adhesive cartridges and tools. The DMA50 is their flagship Dual-Barrel dispensing/Dispenser for 50ml cartridges. This kit includes the Dispenser, and one integrated 1:1 and 2!: ratio plunger. This single plunger fits both types of mix ratios. The dispenser is extremely important to the adhesive dispensing process. A 2-component adhesive can only reach its full potential if constant metering of the correct ratio is ensured. The DMA50 Dual-Barrel dispenser is a precision tool that is suited for industrial, professional and DIY use and is very user-friendly. This Dispensing Kit works with Loctite, Devcon, Araldite, Gorilla, and all others with the standard 50ml "Square-Back" design with 1:1 or 2:1 mixing ratios (which are the dominant most popular mixing ratios used today) Note: This gun does not fit dental or medical cartridges. if your cartridge is ’rounded’ on the back, and not rectangular, then this gun will not fit. We do carry the correct dental/medical guns. Search Amazon for MixPac DS53 or Mixpac DS51 gun. these will work properly instead.
3M 08571 Standard Manual Applicator Gun
- Maximum time and cost efficiency during small or space-intensive adhesive applications
- Designed for use with smaller cartridges from 37.5 mL to 400 mL, ideal for one-off jobs
- Premixes two-part adhesives right from the cartridge, saving time and money
- Manual application – no extra equipment required, maximizing efficiency on individual repair orders
The #3 UniBit Step Drill has 9 holes from 1/4″ to 3/4″ hole sizes with increments of 1/16″; shank size is 3/8″. Each UniBit step drill has an easy-to-sharpen, non-skid tip which eliminates skidding and the need for center punching; the tip gives sure starts even on curved surfaces. The single-fluted cutting edge that you will find on the UniBit step drills helps assure true round holes and allows greater control. They are constructed of industrial grade high speed steel and heat treated to assure maximum durability. The UniBit step drill has 3 flatted shanks, which prevents slipping in drill chuck. The multiple steps on each UniBit eliminates the need to maintain a toolbox full of specific size drill bits. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
MG Chemicals Dispensing Gun for 50 mL 1:1 epoxy Cartridge 8DG-50-1-1
Manual Double Epoxy Gun 400 mL/13.5 fl oz (1:1 Mix Ratio) Dual Component Applicator for Panel Bond 2 Part Cartridge Caulking Gun (Passion Red)
- 【COMPATIBILITY】Designed for the use of 400 mL (1:1 Mix Ratio) cartridge to dispense a wide variety of bonding agents
- 【EASY TO USE】Manual design – no extra equipments required, maximizing efficiency on individual repair, engineered to deliver materials smoothly and precisely, producing great results
- 【SAVING】Premix 2 part of adhesives right from the cartridge, saving time and money
- 【WIDE APPLICATION】Works with Epoxies, Acrylics and Urethanes with 2 Part Cartridges
- 【DURABLE】Made with heavy duty metal barrel, handle, rod, plate and treated with premium finish
Similar items with 4 stars and above
50ml Universal Impression Mixing Dispensing Dispenser Gun 1:1 /2:1
1:1/2:1 Silicon Dispenser Gun for 50ml Silicon Rubber Impression Materials type 3 light body Material: Medical Grade ABS
3M Hot Melt Applicator TC with Quadrack Converter and Palm Trigger, 1 Applicator/case
- Lightweight designs offer easy handling
- Uniquely designed for 3M Hot Melt adhesives sticks
- Meet the needs of low and high volume dispensing
- Can be customized with accessories to meet application specifications
- Balanced designs for easy, controlled application
- Designed for comfort and ergonomics in mind
- Delivers up to 3.5 pounds of adhesive per hour
- Palm trigger improves operator comfort
- Quadrack converter provides positive feed-through
- Rugged design provides dependable operation
Product Description
3M Hot Melt Applicators are designed to help improve productivity, lower costs and minimize waste in industrial applications. From high volume to detail work, 3M Hot Melt Applicators ensure optimum performance through melt-on-demand or progressive feed technology to meet your production deadlines.
From the Manufacturer
3M(TM) Scotch-Weld(TM) Hot Melt Applicator TC with Quadrack Converter and Palm Trigger. (Not to be used with low temperature adhesives).
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3m epx plus ii applicator, eg:
- What are Top 10 3m epx plus ii applicator for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3m epx plus ii applicator to buy?
- What are Top Rated 3m epx plus ii applicator to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m epx plus ii applicator?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m epx plus ii applicator.
- Before deciding to buy any 3m epx plus ii applicator, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3m epx plus ii applicator and What you should consider when buying the 3m epx plus ii applicator and Where to Buy or Purchase the 3m epx plus ii applicator. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3m epx plus ii applicator of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m epx plus ii applicator.
Conclusion
By our suggestions above, we hope that you can found 3m epx plus ii applicator for you.Please don’t forget to share your experience by comment in this post. Thank you!
