homesellquick 
Nowadays, there are so many products of 3m adhesive mounting discs in the market and you are wondering to choose a best one. You have searched for 3m adhesive mounting discs in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3m adhesive mounting discs which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
21,899 Reviews Scanned
Gecko-Loc ???? Clear Acrylic Adhesive Disk for Mounting Suction Cup Bath and Shower Accessories – Package of 2
- ???? The 2 3/4 Inch (70 mm) round adhesive disk allows suction cup bath and shower accessories to adhere to any surface
- ???? Clear acrylic, so bath accessory mounting installation does not show.
- ???? Strong, long lasting hold up to to 10 pounds, using 3M VHB foam adhesive.
- ???? Contains 2 Disks – Compatible with all Gecko-Loc products
- one side sticky, one side smooth.
- ????No Drilling, easy to install and remove without damaging the surface.
The Gecko-Loc Acrylic Adhesive Disk with 3M VHB Foam offers the smooth surface needed for vacuum suction cups and the strong adhesive of 3M VHB adhesive.
Holds up in wet environments
Package contains 2 disks
Dashboard Pad Mounting Disk for Suction Cup Phone Mount & for Tom Tom Garmin GPS Suction Mount Sat Nav Dash Cam Holder Stick On Universal Dash Mount Pad w/3M Adhesive 70mm Diameter 3 Pcs
- To provide smooth, glass-like surfaces for pedestals of suction cup car mounts to work more effectively.
- 3M PE foam adhesive at the bottom can be fixed on textured surfaces.
- Has a diameter of around 2.76 inches, applicable to most suction cup GPS/mobile holders on the market.
- No tools required for installation.
- Buy with confidence as every APPS2Car product comes with one-year warranty.
ARKON APVHB20 90mm Extra Strength Adhesive Mounting Disk for Car Dashboards
- Extra strength adhesive mounting disc adheres to dashboards and works with any 80mm suction mounting pedestal
- Compatible with Arkon CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T mounting pedestals
- 2 year limited warranty
- Includes Alcohol Cleaning Pad
The APVHB20 90mm adhesive mounting disk features an extra-strength 3M VHB adhesive and allows you to securely mount an Arkon or third-party 80mm windshield suction mounting pedestal to your car’s dashboard. Applicable Arkon mounting pedestal models include CM017-KST-2SH, CM078WD-SBH, RM080AMPS, RM0792TWD, and RM0802T. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the extra-strength adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M VHB dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) WARNING: Use caution and discretion when adhering APVHB20 to your car dashboard or other flat surface. This disk uses 3M VHB adhesive, which is designed to be a PERMANENT solution. Use of this disk may result in permanent adherence to the selected surface. Professional strength solvents or tools may be helpful in removing the adhesive. Arkon is not responsible for any damage caused to your vehicle or other surface due to the installation of this mounting disk. Adhesive disks with a semi-permanent bonding strength (Model AP036 -70mm, Model AP013 -80mm, Model AP020 -90mm) are available from Arkon. For an extra-strength 80mm disk to use with 70mm suction mounts, see Arkon Model APVHB13.
AEBTYKJ 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc for Tom Tom Garmin GPS Sat Nav Dash Cam Suction Cup Mount(Blue-3Packs)
- Has a diameter of around 3.15 inches, applicable to most suction cup GPS/mobile holders on the market.
- Back: Good initial tack and stickiness, good stability, good adhesion to plastic, rubber and rough surfaces.
- Compatible with Garmin TomTom Magellean GPS mounting pedestals
- The 3M adhesive is strong yet leaves no residue when removal is required，Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- Universal Compatibility – Semi-permanent Adhesive Mounting Disc works with all Garmin TomTom Magellean GPS suction mounting pedestals, and dashboard suciton phone mount.
Tips: 1. When installing, choose a dry cleaning table that is relatively flat and easy to install. 2. The adhesive is 3M adhesive, which has strong adhesiveness and is not easy to disassemble. 3. Try not to move the position after the installation is complete
Randconcept – 95mm 3M VHB Adhesive Dashboard Pad Mounting Disk for Suction Cup Phone Mount & Garmin GPS Suction Mount | 3.74" Wide Diameter 2 Pcs
- ✅ WIDE COMPATIBILITY: Adhesive mounting disk fits any suction cup style or accessories mounting within 90mm in diameter suction cup for adhering to dashboards in the market. Our sticky disc is flexible option for carmount sticky pad replacement!
- ✅ MOUNTING WITH SMOOTH & FLAT SURFACE: Thanks for PVC plate and 3M VBH adhesive, upper part PVC plate provides smooth and flat surface while bottom Sticky 3M PE foam adhesive fixed dashboard textured surface!
- ✅NO MORE ADHESIVE SEPARATED: The bottom grey color PE foam adhesive is enhanced version comparing with white adhesive in the market. It performs well even in hot and cold weather or climates.
- ✅ SAFE JOURNEY: After suction cup firmly attached with our sticky pad, you can enjoy navigation with smartphone or garmin GPS devices even camera securely on dashboard. No more dropping phone holders or garmin accessories for gps during driving.
- ✅ 100% RISK-FREE PURCHASE: At Randconcept we know our customers want nothing but the finest which is exactly what we offer. From using the highest quality materials to using state of the art adhsive disc, we take all the right steps to make sure you get the finest. We’re so confident that you’ll love our sticky pads that we offer a 100% Customer Satisfaction Warranty so that you know you’re getting exactly what you pay for!
70mm Adhesive Mounting Disk for Car Dashboards Garmin TomTom GPS Dashboard Disc
The AP036 70mm adhesive mounting disk allows you to mount an Arkon or third-party 60mm windshield suction mounting pedestal to your car’s dashboard, including mounting pedestals for Garmin and TomTom GPS devices. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Allow 24 hours for the adhesive to cure before securing the base of the mounting pedestal to the center of the disk for best results.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For an 80mm disk to use with 70mm suction mounts, see Arkon Model AP013. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
AccessoryBasics Lots off 2 Pack of 3.50" (90mm) Adhesive Mounting Disk for Boat Car Dashboard GPS (Compatible with Garmin Nuvi Magellan TOMTOM GPS Mount & iphone Smartphone Mount) (90mm)
- Brand New from AccessoryBasics in No Fuzz No Mess Packaging
- 90 mm round console disk can transform any windshield mount into a console dashboard mount
- 3M adhesive is strong yet leaves no residue when removal is required
- emi permanent adhesive mounting disc works with all Garmin mounting pedestals
- Package includes 2 x 90mm Disks & Manufacture 1 year direct replacement Warranty
3M Adhesive mounting disc works with any 65mm or smaller suction mounting pedestal. (Garmin NUVI GPS).
Installation
1) Please clean the surface with the included alcohol prep pad
2) remove the protective cover on the base or the disk
3) Press the disk on to the surface for 30 sec first
4) Attach mount on to the disk
Arkon 80mm Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc
The AP013 80mm adhesive mounting disk allows you to mount an Arkon or third-party 70mm windshield suction mounting pedestal to your car’s dashboard, including Arkon’s mounting pedestal models GN079WD-SBH, GN068WD-SBH, GN022-SBH, GN014-SBH, GN015-SBH, and GN042-SBH. (Note that the disc is meant to be a bit larger than the mount to ensure a secure fit.) This package includes only the adhesive disk (mounting pedestals sold separately). To apply the adhesive disk to the car’s dashboard, simply remove the paper backing from the back of the plastic 3M dash mount disc, then place and press down on a previously cleaned surface. (Use included alcohol pad to ensure mounting area is clean and free of any dashboard conditioners or other treatments. For best results, allow 24 hours for the disk adhesive to cure on the dashboard before securing the base of the mount to the center of the disk.) While this disk is meant to be a semi-permanent solution, the disk can be removed from the dash by applying a generous amount of rubbing alcohol or similar adhesive removal product to the area with a cotton swab. Let the liquid saturate the area, then work a long piece of dental floss under the disk to cut through the adhesive until the disk is removed. For a 90mm disk to use with 80mm suction mounts, see Arkon Model AP020.
AEBTYKJ 3.15in Adhesive Mounting Disk for Adhesive Mounting Disk for Car Dashboards GPS Smartphone Dashboard Disc（Red-3Packs）
- Scope of application: Suction cup bracket for GPS navigator, driving recorder and early warning instrument
- The center console base has good initial tack and holding viscosity, good stability, and good adhesion to plastic, rubber and rough surfaces.
- Product material: main body ABS, back glue is 3M VHB, disc diameter is 80mm, 3M adhesive diameter is 71mm, thickness: 4.1mm.
- Hard to avoid contact between the finger and the rubber surface during the operation. After pressing, press hard to ensure sufficient contact and wetting of the rubber surface.
- Package :3 * 80mm Adhesive Mounting Disk，3 Alcohol Pads
Tips: 1.The bonding surface should be kept absolutely clean and dry. It can be scrubbed with alcohol or acetone. The surface after cleaning can be completely evaporated after the solvent is completely evaporated. It can also be baked with a baking gun or a hair drye. 2.Hard to avoid contact between the finger and the rubber surface during the operation. After pressing, press hard to ensure sufficient contact and wetting of the rubber surface.
GEBANGTY 80mm Adhesive Mounting Disk for Car Phone Mount Also Garmin Magellan GPS Suction Cup Mount(2pack)
- Scope of application: Suction cup bracket for Car Phone Mount，GPS navigator, driving recorder and early warning instrument
- Product material: main body ABS, back glue is 3M PE FOAM ,3M PE FOAM sticks to almost all textured surfaces.
- The center console base has good initial tack and holding viscosity, good stability, and good adhesion to plastic, rubber and rough surfaces.
- Before installation:Make sure the surface is cleaned throughly and free of any dashboard conditioners or other treatments.
- No tools required for installation.
Hard to avoid contact between the finger and the rubber surface during the operation. After pressing, press hard to ensure sufficient contact and wetting of the rubber surface.
Our Promise to Readers
We keep receiving tons of questions of readers who are going to buy 3m adhesive mounting discs, eg:
- What are Top 10 3m adhesive mounting discs for 2020, for 2019, for 2018 or even 2017 (old models)?
- What is Top 10 3m adhesive mounting discs to buy?
- What are Top Rated 3m adhesive mounting discs to buy on the market?
- or even What is Top 10 affordable (best budget, best cheap or even best expensive!!!) 3m adhesive mounting discs?…
- All of these above questions make you crazy whenever coming up with them. We know your feelings because we used to be in this weird situation when searching for 3m adhesive mounting discs.
- Before deciding to buy any 3m adhesive mounting discs, make sure you research and read carefully the buying guide somewhere else from trusted sources. We will not repeat it here to save your time.
- You will know how you should choose 3m adhesive mounting discs and What you should consider when buying the 3m adhesive mounting discs and Where to Buy or Purchase the 3m adhesive mounting discs. Just consider our rankings above as a suggestion. The final choice is yours.
- That’s why we use Big Data and AI to solve the issue. We use our own invented, special algorithms to generate lists of Top 10 brands and give them our own Scores to rank them from 1st to 10th.
- You could see the top 10 3m adhesive mounting discs of 2020 above. The lists of best products are updated regularly, so you can be sure that the information provided is up-to-date.
- You may read more about us to know what we have achieved so far. Don’t hesitate to contact us if something’s wrong or mislead information about 3m adhesive mounting discs.
Conclusion
By our suggestions above, we hope that you can found 3m adhesive mounting discs for you.Please don’t forget to share your experience by comment in this post. Thank you!
