Which Is The Best 3D Printer Heating Bed 500Mmx500mm

Type : Silicone heating pad
Waterproof level : IP65
Thickness : about 1.5mm -1.6mm
Production tolerance : +/-10%
Wire : NTC 100K 3950 and high temperature wire
110V 1400W Maximum working temperature : 170C°( at room temperature) , Current : 12.7A , Resistance : 8.6Ω
220V 600W Maximum working temperature : 100C°( at room temperature) , Current : 2.7A , Resistance : 80.6Ω
220V 1000W Maximum working temperature : 125C°( at room temperature) , Current : 4.55A , Resistance : 48Ω
240V 1000W Maximum working temperature : 125C°( at room temperature) , Current : 4.2A , Resistance : 57Ω
Package Contents: 1pcs 500mmx500mm plate 
Shipping
Ship to USA:7-15 days
Ship to other countries:15-35days
Note:Brazil/ Russia /Ukraine Will take much longer than other countries,so the
Item specifics:
Model number: 1000W
Item type: Heatbed

Type : Silicone heating pad
Waterproof level : IP65
Thickness : about 1.5mm -1.6mm
Production tolerance : +/-10%
Wire : NTC 100K 3950 and high temperature wire
110V 1400W Maximum working temperature : 170C°( at room temperature) , Current : 12.7A , Resistance : 8.6Ω
220V 600W Maximum working temperature : 100C°( at room temperature) , Current : 2.7A , Resistance : 80.6Ω
220V 1000W Maximum working temperature : 125C°( at room temperature) , Current : 4.55A , Resistance : 48Ω
240V 1000W Maximum working temperature : 125C°( at room temperature) , Current : 4.2A , Resistance : 57Ω
Package Contents: 1pcs 500mmx500mm plate 
Shipping
Returns Policy
100% Return – Guarantee in 30 daysWe accept returns for an exchange, or
Item specifics:
Item type: Heatbed
Model number: 1000W

If you need to send DHL/federate/EMS,please contact us.We need to discuss the freight with you.
This is a high quality fine processing aluminum.It is not low quality and cheap aluminum.
The DFORCE has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.
  If you want to buy Full V6 HOTEND,please click 
  If you want to buy high quality MK10 Brass Nozzles
  If you want to buy high quality Micro Swiss MK10 Brass Nozzles
  If you want to buy Thermistor Cartridge 260 degrees,please click 
DFORCE 3MM thickness thermal insulation 3D Printer Heating Bed Block Insulation Cotton For TEVO Reprap Ultimaker Makerbot
Size:140MM*140MM/200MM*200MM/214MM*214MM/220MM*220MM/250MM*250MM/200MM*250MM/200MM*300MM/300MM*300MM/diameter150MM/diameter220MM
If you need other size,please contact us,we can cut them for you with any size.
Number:1PC
Color:white
thickness:3MM
This High temperature resistant cotton can work for a long time in high temperature of 1200 degree.
Package includes:1 PC
Pruduct display:
Item specifics:
Item type: Heat Paper
Model number: Insulation Cotton

1PC Foil Self-adhesive Insulation Cotton 200/300mm Heat Insulation Cotton 10mm Thickness 3D Printer Heating Bed Sticker 
Feature
Strong sound insulation and absorption performance,heat insulation, damping and antisepsis
Descriptions:
size:200mmx200mmx10mm/300mmx300mmx10mm
Installation Notices:
1, Please clean the surface you want to paste.
2, Make insulation materials and sheet metal firm fit, and play best adhesive, damping performance
3, Do not cover the chassis wiring or air holes when you installation
4, Appropriate use of adhesive tape will strengthen connections effect
5, Paste Aluminum Soundproof/Damping Plate,you could heat with a hair dryer to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius, first with sun lamp heating it until soft. Then remove the wax paper and paste it
6, A successful installation process is best not to repeat tear paste, paste effect won’t be damaged
7, The extra insulation can be pasted in some hidden place
Package includes:
1X Foil Self-adhesive Insulation Cotton  
Item specifics:
Model number: Foil Self-adhesive Insulation Cotton
Item type: Heat Paper

Descriptions:
The benefit for keeping the key parts of the 3D printer – heating aluminum block warm, is making the internal temperature flat, saving power, and energy.
100% brand new and high quality.
The heat insulation cotton is used for 3D printer nozzle keeping warm.
The heating insulation cotton is made from heat-resistant ceramic fiber.
This high temperature resistant cotton can work for a long time in high temperature of 900 degree
Size:
140*140mm /200*200mm /214*214mm/220*220mm /200*250mm/200*280mm/200*280mm/250*250mm
(If you need another dimension, please tell us that we’ll help you cut the size you want.)
1x Hotbed Pad
Item specifics:
Model number: Heatbed cotton
Item type: Heatbed
Material: cotton
Product name: Heated bed
Color: White
Thickness: 3mm

3D Printer Machine US Profile Paper Tape High Temperature Adhesive Tape Heating Bed Board Special Paper
Descriptions:
>> High-quality 3D printer accessories US-profile tape, original boutique!
    Environmental protection, safety, harmless
     High quality raw materials, fine workmanship
>> strict quality control system, quality assurance
Product technical parameters：
[Name]: US-profile tape
[Color]: light yellow / beige
[Specification]: 50mm * 15m, each layer thickness 0.16mm
[Features]: high temperature, strong viscosity, easy to pull off
[Packing]: volume
Item specifics:
Model number: 50mm*15m
Item type: Heat Paper
Substrate: US profile paper
Whether double-sided tape: no
Scope of application : heated bed
Short temperature tolerance : 300 Degrees Celsius
Long temperature resistance : 260 Degrees Celsius

if you need 
Item specifics:
Item type: Heatbed
Condition: New
Size: 250*250*3mm
Thickness: 3mm

Features:
1. Lightweight and flexible, with good water-proof performance and quick heating.
2. The temperature is heated evenly, the heat efficiency is high and the toughness is good.
3. Stable quality, damp proof and anti-chemical corrosion.
4. High safety, long life and not easy to age.
It has excellent softness and no need to worry about deformation.
Parameters:
Size:300 x 300 mm
Volt: 220 v
Watt: 300 w
Positive temperature error: 5-8 degrees.
Insulation material: high temperature resistant silicone rubber cloth.
High voltage test: 1500v/1min5mA(no breakdown)
Power density: up to 0.6w/cm2.
Insulation resistance: ≥5 MΩ
Use voltage: AC and DC can be applied.
Fixed type: devil stick, spring, band.
Digital temperature control：Adjustable range: 0-200 degrees Celsius
1PC Silicone Heatbed
Item specifics:
Item type: Heatbed
Model number: Silicone heater
Product name: Silicone Heater 220V
Size: 300*300MM
Supply voltage: 220V
Power: 300W
Maximum operating: 200 C
Accessories: NTC 100K Thermistor
Thickness : 1.7MM
Material: Synthetic Fiber
Place of region: Guangdong China(Mainland)

If you need to send DHL/federate/EMS,please contact us.We need to discuss the freight with you.
The trianglelab has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.
External high current mosfet module is a solution for power a large heatbed without blow up the control board of your 3D printer.
Each module will doing a load test before delivery.
Superior performance of MOSFET(60V/290A R(ds)1.8mΩ)
Appropriate heat dissipation
Compact size
Support 50V 20A upto 1000W
Control pin compatible with both aux pin and bed mosfet output
Power a big  heat element without damage your expensive controlboard
Aply a second PSU same or higher voltage for your heat element
It can controlled by any aux pins from control board so you can save a mosfet output to doing other things(need to change the heater pin in the firmware)
Please mind the anode and cathode of the connectors.
Plaese insure the wire of your circuits is big enough for handle such amonut  of current.
Do not tin the ends of the wire.
Preferably,use bootlace ferrules on the end of the wires.
Please make sure the screws of the mosfet module terminals are tighten up to minimize the contact resistance otherwise the terminals will melt under lager current.
Working voltage:DC 10-50V
Working current:typical 20A up to 30A with coolingfan
1 X TL-miniMostfet module
1 X Control wire
4 X Nylon M3X6 HEX spacer
4 X Nylon M3 nuts
Item specifics:
Model number: TL-miniMosfet

Conclusion

By our suggestions above, we hope that you can found 3d printer heating bed 500mmx500mm for you.Please don’t forget to share your experience by comment in this post. Thank you!