homesellquick 
Nowadays, there are so many products of 24v heating element in the market and you are wondering to choose a best one. You have searched for 24v heating element in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 24v heating element which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
DERNORD 24V 900W Stainless Steel Heating Element Submersible Water Heater Element
- 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
12V/24V/220V Aluminum PTC Heating Element, 70β- 220β PTC Thermostat Heater Plate PTC Ceramic Air Heater Miniature Heating 15028.5mm(12V 70β)
- γ Ceramic Insulation Element γ The ptc heating element is adopt with ceramic insulation, safe to use and can be dry heated for a long time, high reliability
- γ Eco-friendly Aluminum Housing γThis ptc heating plate housing is made of aluminum, eco-friendly, sturdy and durable in use
- γ Wide Application γ 100% brand new and high quality 12v ptc heating element, widely used in Air conditioning, electric heating, automobiles, air curtains, humidifiers, dryers, etc. Also used for car and electronic components preheating
- γ Temperature Resistant Lead Wire γ Comes with a 15cm lead wire, which is high temperature resistant. It can be easily used to heat solids and gases. Simple structure, easy to install and long service life
- γ Warranty γ We are here with a 100% product promise to give you the best in customer care! Please feel free to contact us if you are not satisfied with it for any reason. We promise all the issue will be solved within 24 hours
WE SELLER HAS TO SAY:
Our team is doing all we can to provide good quality products in reasonable price for our loyal customers. We all try our best to implement “customer first” concept in the process of product designing, quality monitoring, price maintaining and after-sales service. As an responsible seller, we promise that 100% money refund about damaged product. If your have any product issues, please do not hesitate to contact us. Just feel free to order our product . Sincere thanks for your browsing and support!
Specification:
Material: Aluminum
Heating Material: PTC Thermistors
Heating Mode: Heat through the flow of air or direct contact with an object
Lead Material: High temperature resistance rubber wire
Wire connection mode: Connect rated voltage, regardless of positive and negative poles
Leading Wire Length: Approx. 15cm / 5.9 inch
Size: Approx. 150*28.5mm / 5.9*1.1in
Weight: Approx. 72g / 2.5 oz
Type:(Optional)
Voltage ( V )-Temperature (β)
220V-80β / 220V-120β / 220V-220β / 12V-70β / 12V-120β / 12V-220β / 24V-70β / 24V-120β / 24V-220β / 36V-220β / 48V-220β / 110V-220β
Package list:
1 * PTC Heating Plate
Note:
The power of PTC heating plate is not fixed. In a certain range, the better the heat dissipation, the greater the power.
Low voltage products not only need to meet their voltage, but also need to pay attention to the current.
If the power supply current can not meet the impact current of the product, the product will be slowly warming up, low temperature, or even short circuit.
Cannot be directly immersed in water or liquid.
Dernord 36V 1200W Stainless Steel Heating Element Immersion Heater Submersible Water Heater Element with 1 Inch NPT Fitting Double U Type
- 36v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
36V 1200W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
β Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
β Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
β These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 36v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:36volts
Wattage:1200 watts
Item Weight:11ounces
Product Diameter: 8mm
Tube length: 7.5 Inch
Screw Type:1βNPT
Color:White
DERNORD 24V 600W Heating Element Submersible Water Heater Element Stainless Steel Immersion Heater with 1 Inch NPT Fitting
- 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- Easy to install for heater parts,Stainless steel surface has electropolish
- UL and cUL listed to the safety standards
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
24V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
β Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
β Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
β These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:24volts
Wattage:600 watts
Item Weight:10.6ounces
Product Diameter: 8mm
Tube length: 155mm
Screw Type:1βNPT
Color:White
DERNORD 24V 600W Submersible Water Heater Element with Double U Type Immersion Heater
- 24v DC heater connects with batteries, solar panels, hydroelectric generators and wind turbine dump
- 1″ NPT flange fits USA standard water tank or your own custom heater tank
- UL and cUL listed to the safety standards
- Easy to install for heater parts,Stainless steel surface has electropolish
- Supplied with silicon sealing washer which is flexible and waterproof
Product Features
24V 600W Element : These elements are made from stainless steel to prevent any corrosion so are suitable for use in virtually all types of water tank
Product Application
β Great for use heating water in domestic hot water cylinders or water tanks in caravans,boats,workshops etc. Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
β Can also be used with waste vegetable oil in the the manufacture of biodiesel, and for home brewing etc
β These can also be used to prevent water freezing during winter months in livestock drinkers or raised ponds by connecting one to a large 24v battery recharged by a large solar panel or wind turbine, just use a basic 5 degrees c normally open thermostat and when the water temperature gets near five degrees the heater will automatically come on and warm the water by a few degrees before switching off again, one could also be used in the water storage tank in your loft if its prone to freezing in the winter months
NOTES
If you have a gas hot water heater you may wish to put an electric unit ahead of it. This way the gas heater is always being fed hot water so it does not turn on as often and for shorter periods of time when it does.
If used as a diversion (dump) load, such an element is connected to the batteries via a charge regulator. When the regulator detects that the batteries are fully charged, it diverts the generated electricity to the element which heats water.
Technical Details
Voltage:24volts
Wattage:600 watts
Item Weight:10.6ounces
Product Diameter: 8mm
Tube length: 175mm
Screw Type:1β NPT
Color:White
Bestol 2pcs PTC Heating Element 50W AC DC 24V 70 Degree consistant Temperature Ceramic Thermostatic
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
βProduct Name :PTC Heating Element
Size(Approx.) :50Γ15Γ3.5mm
Voltage 24V AC/DC
Temperature:70 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 24V 70 Degree Celsius PTC Heater Element
Signswise 5pcs Reprap 24V 40W Ceramic Cartridge Heater for 3D Printer Prusa Mendel
Bestol 2pcs PTC Heating Element 50W AC DC 24V 220 Degree consistant Temperature Ceramic Thermostatic
- 2PCS ,Safety, surface insulationheat up quickly, long service lifeconstant temperaturehigh power, easy use, high reliability
- The PTC part is used for heating air or solid
- It’s meterial has a characteristic that it is constant temperature on the surface
- The power consumption of the heater is not fixed
- The better the heat dissipation, the greater the power.
βProduct Name :PTC Heating Element
Size(Approx.) :50Γ15Γ3.5mm
Voltage 24V AC/DC
Temperature:220 Degree Celsius
Heat Material: Thermistor
Heat Methods: Heating Conduction
Lead Wire: 150mm High Temperature Line
Surface Insulate: Yes
Packing:
2pc/lot 50x15mm 24V 220 Degree Celsius PTC Heater Element
Hakko A1174 Heating Element 24V 60W for 807
Heating Element for 807 Handpiece
BCZAMD 24V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31β to 340-350β. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
Package listing:
3 x 24V 50W Ceramic Cartridge Heater
Conclusion
By our suggestions above, we hope that you can found 24v heating element for you.Please don’t forget to share your experience by comment in this post. Thank you!
