Best 120Vac Heating Coil
Nowadays, there are so many products of 120vac heating coil in the market and you are wondering to choose a best one. You have searched for 120vac heating coil in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 120vac heating coil which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
Dernord 120V 1650W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug (1.5 Inch Tri clamp)
- With 3-Wire Electrical Locking Plug, grounded for your safety
- Easy to Install and fits Standard 1.5″ Inch (Ferrule OD 50.5mm) tri-clamp coupler of American
- SUS304 Tri-clamp Foldback heating element provides 1650w 120v of power
- The shape is to minimize length and maximize heated surfaces
- Resists dry firing, lime deposits, and sand that would burn out ordinary elements
Product Features
120V 1650W Tri-clamp foldback heating Element : Replacement American standard water heater parts
From the Manufacturer
Dernord 120V 1650W Tri-clamp Foldback Heating Element Stainless Steel Immersion Water Heater with 3-Wire Electrical Locking Plug has a compact, energy efficient design that is well suited for many applications. The element is folded back to minimize length and maximize the heated surface.It provides uniform heat distribution and offered long performance life, and fits more models of American,for Bradford White, Craftmaster, General Electric and Whirlpool heaters.
Technical Details
Voltage: 120V
Wattage:1650W
Color: Silver
Tube length: 235mm
Tube diameter: 8mm
Ferrule OD Size:50.5mm
1000W Immersion Heater, Gesail UL-Listed Bucket Water Heater with Heating Element, Submersible Heater with Thermostat and Auto Shutoff Protection, Perfect for Home Travel and Winter Job – Silver
- High Power: 1000W, 120V immersion water heater, heat 5 gallons of water in few minutes, depending on the volume of the water, the original water temperature and container. It will heat water continuously over 180 degrees F and towards boiling(It can’t boil water).
- Thermostat Feature – The middle stainless steel tube contains a thermal overload safety switch, when water reaches a certain temperature(about 180-194 degrees F), it can automatically cycle on and off to maintain water temperature. It will not overheating and save power.
- Guard – The stainless-steel guard on the electric bucket heater protects the heating element from directly contacting persons or animals. The holes on the guard help release heat into the water faster.
- Simple Operation – Immerse in water at proper level. Plug into any grounded wall outlet. Check power indicator light in plug to make sure unit is on. The cord and handle are not designed to submerge in water.
- Safety and Widely Usage: UL-Listed, this bucket heater is safe for use in all pails, buckets and bathtubs, perfect for home, travel and winter time job.
GESAIL UL-Listed Bucket Water Heater
Use for construction industry, animal husbandry, car washing, indoor use and many other jobs in cold weather. Also can be used to heat small swimming pool. Make sure your wire and plug can withstand the load of (multiple) heater(s), otherwise it may cause overheating or burn off. Especially for continuous long time use.
This immersion heater is safe to use in a variety of containers and tubs, including plastic or metal pails, buckets, just make sure your container can contain boiling water.
Bucket Water Heater is only to be immersed up to the point of the electrical connection. Water level about 8” deep, make sure the water always covers the stainless-steel guard. The cord and handle are not designed to submerge in water.
Notice: This immersion water heater can’t be used in hot tubs
Warning:
Please don’t use extension cord.
Never leave it unattended.
If the black plastic handle is too hot, please unplug it, wait until cool before using,otherwise a fire hazard will result.
50 Amp Definite Purpose Contactor 3 Pole, 120VAC Coil 40A, 50A, Lighting, Heating, Refrigeration
40 Amp. 3 Pole 943120 Normally Open (N.O.) contacts NEMA . Definite purpose Lighting – Refrigeration – HVAC, – Dim: 2.75 x 3.5 x 3.0 in (70 x 90 x 75 mm) Power Lug Terminal Capacity AWG # 4 120VAC coil
Contactor, 3 Pole, 30Amp AC-1, 50A. AC-3 32A, Aux: NO NC, 120VAC Coil, 40Amp Lighting & Heating, 30A Motor 600V IEC
50 Amp. AC-1, 32 Amp. AC-3 Normally Open (N.O.) contacts 600V 50A. Incandescent, LED or resistive load 32A. Motor control, 20HP@ 480VAC Auxiliary contact 1NO/1NC Power Lug Terminal Capacity AWG # 4 Coil 110/120VAC.
16MM Kevlar Wrapped Flat Heater Coil of 5ft Length
- High quality thermocouple that detect real time temperature changes accurately.
- The housing is composed of steel and is extremely durable.
- 5 Golden PINs Female XLR which make it better conductivity
- Non Flammable Kevlar Sheath
- Make sure your temperature controller is from us or wired the same, otherwise it will not work!
NOTE: Make sure your temperature controller is from us or wired the same, otherwise it will not work!
Coil Features:
120W/120V
1 Year Warranty
Coil Length: 60 inch
Height: 12.7mm
5PIN Female XLR Connector
Non Flammable Kevlar Sheath
Coil Size & Tolerance: 16mm +/- 0.1
Resistance Material: Ni80Cr20 from Germany Wiring: PIN 1:TC+ , PIN 2:TC-, PIN 3:Ground, PIN 4: Load1, PIN 5: Load2
40 AMP DEFINITE PURPOSE CONTACTOR 3 Pole 120V Lighting, Heating, Refrigeration, 40A UL
3 Pole 120VAC Coil Contactor Type: Definite Purpose Contactor Frame Size: D Amps – inductive: 40 Amps – resistive: 40 Poles: 4 Coil Voltage: Contact Rated 110-120V AC 600V Enclosure Type: Open Manufacturer Series: NEMA
5y6 40 AMP DEFINITE PURPOSE CONTACTOR 4 Pole 120V Lighting Heating Refrigeration 1225 Sound
4 Pole 120VAC Coil Contactor Type: Definite Purpose Contactor Frame Size: D Amps – inductive: 40 Amps – resistive: 40 Poles: 4 Coil Voltage: Contact Rated 110-120V AC 600V Enclosure Type: Open Manufacturer Series: NEMA
YuCo YC-LHEH80-2 100AMP 100AMP DEFINITE PURPOSE LIGHTING & HEATING MAGNETIC CONTACTOR WITH LINE LOAD LUGS 2NO 2NC AUXILIARY CONTACTS 120V AC COIL
NTE Electronics R04-11A30-120 Series R4 General Purpose Multicontact AC Open Frame Relay, Heavy Duty, DPDT Contact Arrangement, 30 Amp, 120 VAC
NTE’s extensive line of UL & CSA listed relays and accessories feature over 750 different NTE relays that you can cross reference to more than 85,000 industry types from 267 different suppliers. Included is a remarkable multifunctional programmable timer/counter that can be programmed to 10 different timing modes, two counting modes, and AC or DC input, slim-line I/O modules in industry standard packaging, PC mountable relays suitable for 5mm grid patterns, PC mountable relays for telecommunications, security and appliances, two different types of thermal circuit breakers, plus new industrial types for HVAC, machinery and equipment applications.
5Y6 40 Amp 4 Pole Normally Open NEMA 600V HVAC Definite Purpose Contactor – 110/120VAC Coil, Inductive 40A, Resistive 50A (Pack of 2)
- INDUSTRIAL QUALITY COMPONENTS – Pack of 2 40Amp 4 Pole Normally Open (NO) Definite Purpose Contactors for HVAC (Heating, Ventilating and Air Conditioning) installations in home and industry. Complies with NEMA 2 standard for consistent and reliable setting. Suitable for 8-pole connections
- APPLICATIONS – Heating, refrigeration and lighting. AC-1 for resistance furnaces, incandescent lamps or electric heaters
- and AC-3 for air conditioners, compressors or fans
- FULL AMP LOAD – Inductive/Motor Load: 40Amp. Resistive/Incandescent Load: 50Amp. DC Load: 30Amp @ 24VDC. Power Lug Terminal Capacity AWG # 4
- COIL VOLTAGE AND LOAD – Voltage: AC 110V/120V, 50/60Hz. Load: 67 VA Inrush and 15VA Sealed
- DIMENSIONS (approx.) – 77.00 x 95.80 x 77.00 mm / 3.00” x 3.77” x 3.00” (Width x Height x Depth)
Pack of 2 40 Amp 4 Pole Normally Open NEMA 600V HVAC Definite Purpose Contactors for heating, refrigeration and lighting installations.
Complies with NEMA 2 standard.
Technical Specifications:
– AC 40A. Definite Purpose. 600V
– Max 2 HP Single Phase @ 115V, 10 HP @ 230V, 15 HP Three Phase @ 480V
– DC 30A 24VDC
– Coil:120VAC, 67VA inrush, 15VA sealed
– Normally Open (N.O.) main contacts
– UL Listed
– Coil 110/120 VAC
– Weight: 1.08 lb (0.55 kg)
– Dimensions: 77.00 x 95.80 x 77.00 mm (3.00” x 3.77” x 3.00′)
Compliance:
CSA C22.2 No. 14, EN 60947-4-1, EN 60947-5-1, IEC 947-2, IEC 60947-4-1, IEC 60947-5-1, UL 508, VDE 0660
Conclusion
By our suggestions above, we hope that you can found 120vac heating coil for you.Please don’t forget to share your experience by comment in this post. Thank you!